=====================  Product Identification  =====================

MSDS NAME:AIRCO 7016M 0.187 10 LB WELDING ROD
NIIN:00-984-4770
MSDS Number: CFGTL
=== Responsible Party ===
Company:AIRCO WELDING PRODUCTS DIV OF BOC GROUP INC
Address:575 MOUNTAIN AVE
City:NEW PROVIDENCE
State:NJ
ZIP:07974-2006
Country:US
Info Phone Num:908-771-1381
Emergency Phone Num:908-771-1381
CAGE:83923
=== Contractor Identification ===
Company:AIRCO WELDING PRODUCTS DIV OF THE BOC GROUP INC.
Address:4437 E 49TH STRRET
City:CLEVELAND
State:OH
ZIP:44125-1005
Country:US
Phone:216-641-8790
CAGE:83923
Company:DIV OF THE BOC GROUP INC AIRCO INC
Address:575 MOUNTAIN AVENUE
Box:City:MURRAY HILL
State:NJ
ZIP:07974
Country:US
Phone:908-665-2400
CAGE:6S493

=============  Composition/Information on Ingredients  =============

Name:IRON       *97-2*
CAS:7439-89-6
RTECS #:NO4565500
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM

Name:TITANIUM DIOXIDE, TITANIUM OXIDE  (SUSPECTED ANIMAL
    CARCINOGEN, IARC GROUP 3)	*97-2*
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)

Name:SILICON	       *97-2*
CAS:7440-21-3
RTECS #:VW0400000
OSHA PEL:10 MG/CUM
ACGIH TLV:10 MG/CUM

Name:MANGANESE		  *97-2*
CAS:7439-96-5
RTECS #:OO9275000
OSHA PEL:5 MG/CUM
ACGIH TLV:1 MG/CUM

Name:SODIUM (NATRIUM)
CAS:7440-23-5
RTECS #:VY0686000

Name:FLUORINE
CAS:7782-41-4
RTECS #:LM6475000
Other REC Limits:1 PPM
OSHA PEL:0.2 MG/CUM
ACGIH TLV:1.6 MG/CUM
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

Name:CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING  *97-2*
CAS:1317-65-3
RTECS #:EV9580000
Other REC Limits:5 MG/M3 RESP DUST
OSHA PEL:10 MG/M3
ACGIH TLV:10 MG/CUM

Name:MAGNETITE, MAGNETIC OXIDE
CAS:1309-38-2
RTECS #:OM4800000
OSHA PEL:5 MG/CUM
ACGIH TLV:10 MG/CUM

Name:OZONE
CAS:10028-15-6
RTECS #:RS8225000
Other REC Limits:0.1 PPM
OSHA PEL:0.2 MG/CUM
ACGIH TLV:V 0.20 MG/CUM

Name:CARBON DIOXIDE   *97-2*
CAS:124-38-9
RTECS #:FF6400000
Other REC Limits:10000 PPM
OSHA PEL:5000 PPM
ACGIH TLV:5000 PPM

Name:CARBON MONOXIDE
CAS:630-08-0
RTECS #:FG3500000
Other REC Limits:50 PPM
OSHA PEL:50 PPM
ACGIH TLV:50 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE NOSE, THROAT/EYE
    IRRITATION, SIDEROSIS, DEATH. ARC RAYS: MAY CAUSE 2ND & 3RD DEGREE
    BURNS TO SKIN. CONTACT W/ELECTRICAL WELDING EQUIPMENT CAN KILL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNS, DISCOMFORT, DIZZINESS,
    NAUSEA, DRYNESS, UNCONSCIOUSNESS.

=======================  First Aid Measures  =======================

First Aid:INHALATION: GIVE OXYGEN/CPR IF NEEDED. OBTAIN MEDICAL
    ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Unusual Fire/Explosion Hazard:NON-FLAMMABLE. WELDING ARC & SPARKS CAN
    IGNITE COMBUSTIBLES & FLAMMABLE PRODUCTS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:TRAIN WORKER TO KEEP HEAD OUT OF FUME
    PLUME. PROVIDE PROTECTIVE SCREENS & FLASH GOGGLES TO SHIELD OTHERS.
Other Precautions:COMPOSITION OF FUMES & GASES DEPENDS UPON METAL BEING
    WELDED, COATINGS ON METAL, AIR CONTAMINANTS FROM CLEANING &
    DEGREASING SOLVENTS, INGREDIENTS OF ELECTRODES. TAKE AIR SAMPLES
    INSIDE WELDER'S HELME T/BREATHING ZONES TO FIND COMPOSITION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR A NIOSH APPROVED FUME/AIR-SUPPLIED
    RESPIRATOR WHEN WELDING IN CONFINES SPACES/WHERE VENTILATION
    DOESN'T KEEP FUME EXPOSURES