=====================  Product Identification  =====================

MSDS NAME:864 5962 SIEMENS NIXDORF DEVELOPER FOR LED PLUS PRINTING SYS
NIIN:00D006565
MSDS Number: CFKWG
=== Responsible Party ===
Company:EASTMAN KODAK COMPANY
Address:343 STATE STREET
City:ROCHESTER
State:NY
ZIP:14650
Country:US
Info Phone Num:716-477-3194 MSDS :800- 242-2424
Emergency Phone Num:716-722-5151
CAGE:19139
=== Contractor Identification ===
Company:EASTMAN KODAK CO GOVERNMENT MARKETS CONTRACTS
Address:343 STATE ST
Box:City:ROCHESTER
State:NY
ZIP:14650-1115
Country:US
Phone:716-722-5151/(800) 242-2424
CAGE:19139
Company:EASTMAN KODAK CO US CUSTOMER SERVICE/GOVERNMENT SALES
Address:800 LEE RD
Box:City:ROCHESTER
State:NY
ZIP:14650-3129
Country:US
Phone:800-828-6203
CAGE:5K871

=============  Composition/Information on Ingredients  =============

Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 95-99%
Other REC Limits:NONE RECOMMENDED

Name:POLYMERS NEW JERSEY TRADE SECRET # 80100185-5061P
Fraction by Wt: 1-5%
Other REC Limits:NONE RECOMMENDED

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: < 1%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9596

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NOT GIVEN
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EXPECTED TO BE A LOW INHALATION HAZARD
    FOR RECOMMENDED HANDLING. MAY CAUSE TRANSIENT EYE IRRITATION. LOW
    SKIN CONTACT HAZARD FOR RECOMMENDED HANDLING. EXPECTED TO BE A LOW
    INGESTION HAZARD. OVEREXPOSU RE TO CARBON BLACK DUST MAY RESULT IN
    IRRITATION OF THE RESPIRATORY TRACT AND BENIGN DEPOSITION IN THE
    LUNG
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
    CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
    CARCINOGENS.
Effects of Overexposure:EYE IRRITATION, RESPIRATORY TRACT IRRITATION,
    BENIGN CARBON BLACK DEPOSITS IN THE LUNGS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALATION: IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL
    ATTENTION IF SYMPTOMS PERSIST. EYES: WASH OUT IMEEDIATELY WITH
    WATER. GET MEDICAL ATTENTION IF SYMPTOMS OCCUR. SKIN: WASH WITH
    SOAP AND WATER . GET MEDICAL ATTENTION IF SYMPTOMS OCCUR.
    INGESTION: DRINK 1-2 GLASSES OF WATER. SEEK MEDICAL ATTENTION.
    NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.

=====================  Fire Fighting Measures  =====================

Flash Point:COMBUSTIBLESOLID
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
    DECOMPOSITION PRODUCTS. WEAR SELF-CONTAINED BREATHING APPARATUS AND
    PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:POWDERED MATERIAL MAY FORM EXPLOSIVE
    DUST-AIR MIXTURES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DO NOT USE A VACUUM CLEANER TO CLEAN  UP
    SPILLS OF POWDERED TONERS. THE VERY FINE PARTICLES CAN CAUSE A FIRE
    OR EXPLOSION. SWEEP MATERIAL ONTO PAPER AND PLACE IN A FIBER
    CARTON. AVOID GENERATION OF DU ST. CLEAN SURFACE THOROUGHLY TO
    REMOVE RESIDUAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID BREATHING DUST. USE WITH
    ADEQUATE VENTILATION. KEEP CONTAINER CLOSED. KEEP FROM CONTACT WITH
    OXIDIZING MATERIALS. MINIMIZE DUST GENERATION.
Other Precautions:MINIMIZE DUST ACCUMULATION. REFER TO NFPA PAMPHLET
    NO. 654, "PREVENTION OF FIRE AND DUST EXPLOSIONS IN THECHEMICAL,
    DYE, PHARMACEUTICAL, AND PLASTICS INDUSTRIES."

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD GENERAL VENTILATION, TYPICALLY 10 AIR CHANGES PER
    HOUR, SHOULD BE USED. RATES SHOULD MATCH CONDITIONS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS OR GOGGLES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
    PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
    AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
    BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:140F,60C
Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Spec Gravity:2.3
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER, SLIGHT ODOR
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
    OXIDES OF NITROGEN, OXIDES OF SULFUR

====================  Disposal Considerations  ====================

Waste Disposal Methods:CAN BE INCINERATED WHEN IN COMPLIANCE WITH LOCAL
    REGULATIONS. CONTRACT WITH A LICENSED CHEMICAL DISPOSAL AGENCY.
    DISCHARGE, TREATMENT, OR DISPOSAL MAY BE SUBJECT TO NATIONAL, STATE
    OR LOCAL LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***