=====================  Product Identification  =====================

MSDS NAME:FIBERSTRAN G-1/40 NATURAL
NIIN:01-367-9735
MSDS Number: CFVYP
=== Responsible Party ===
Company:DSM ENGINEERING PLACTICS
Box:3333
City:EVANSVILLE
State:IN
ZIP:47732-3333
Country:US
Info Phone Num:812-435-7500
Emergency Phone Num:812-435-7500
Preparer's Name:RICHARD M. WENGER
CAGE:IO618
=== Contractor Identification ===
Company:AKZO WILSON-FIBERFIL INTERNATIONAL
Box:City:EVANSVILLE
State:IN
ZIP:47732
Country:US
Phone:812-424-3831
CAGE:27203
Company:DSM ENGINEERING PLASTICS
Box:3333
City:EVANSVILLE
State:IN
ZIP:47732
Country:US
Phone:812-424-3831
CAGE:IO618

=============  Composition/Information on Ingredients  =============

Name:FIBERGLASS (FIBROUS GLASS)
CAS:65997-17-3
Fraction by Wt: 40%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3 RESP DUST
ACGIH TLV:10 MG/M3 (<7MICRONS)

Name:NYLON 6/6, FIBERGLASS REINFORCED
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:CONTACT W/COMPOUND MAY CAUSE
    MECHANICAL IRRITATION OF SKIN/EYE/UPPER RESPIRATORY TRACT.NO
    CHRONIC OR LONG TERM HEATLH EFFECT KNOWN.
Effects of Overexposure:MECHANICAL IRRIT OF SKIN/EYE/UPPER RESP TRACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:CONTACT W/MOLTEN COMPOUND CAN CAUSE THERMAL BURNS.IF BURNED
    FLUSH AREA W/COOL WATER.DONT ATTEMPT TO REMOVE MATERIAL ADHERING TO
    SKIN.SEEK PROMPT MED ATTN.SKIN:WASH W/SOAP/WATER.EYE:FLUSH W/WATER
    FOR 1 5MINS.INHAL:REMOVE FROM EXPOSURE.IF IRRIT PERSISTS SEEK
    PROMPT MED ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:>662F,>350C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICALS.
Fire Fighting Procedures:FIREFIGHTERS AND OTHERS EXPOSED TO PRODUCTS OF
    COMBUSTION SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP UP SPILLED MATERIAL TO PREVENT SLIPPING
    HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL DRY PLACE.KEEP CNTNRS
    CLOSED TO PREVENT MOISTURE ABSORPTION &/OR CONTAMINATION.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED UNDER NORMAL PROCESSING CONDITIONS.
Ventilation:GEN MECHANICAL:ACCEPTABLE. LOCAL EXHAUST:PREFERRED.
Protective Gloves:RECOMMENDED WHEN HDNLG HOT CMPD
Eye Protection:SAF GLASSES RECOMMENDED WHEN HNDLG CMPD
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FLASH POINT FOR BASE POLYMERS BY ASTM D-1929.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:NP
pH:NA
Viscosity:NP
Evaporation Rate & Reference:NA
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID CYLINDRICAL PELLETS, NO SIGNIFICANT
    ODOR,(DISSOLVES IN FORMIC ACID)
Percent Volatiles by Volume:NA
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS.
Stability Condition to Avoid:PROLONGED HEATING ABOVE 650F.
Hazardous Decomposition Products:CO, CO2, HCN, NH3, (NO)X.

====================  Disposal Considerations  ====================

Waste Disposal Methods:EPA HAZ WASTE CLASS:NONE.INCINERATOR OR LANDFILL
    IAW LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***