=====================  Product Identification  =====================

MSDS NAME:SOIL-SEMENT(POLYMER EMULSION) DUST & EROSION CONTROL AGENT
NIIN:01-440-5662
MSDS Number: CFVZT
=== Responsible Party ===
Company:MIDWEST INDUSTRIAL SUPPLY, INC
Box:8431
City:CANTON
State:OH
ZIP:44711
Country:US
Info Phone Num:330-453-0666/330-862-3712
Emergency Phone Num:330-456-3121/330-453-0666/862-3712
CAGE:MIDWE
=== Contractor Identification ===
Company:MIDWEST INDUSTRIAL PRODUCTS
Address:3158 DES PLAINES AVE
Box:8431
City:DES PLAINES
State:IL
ZIP:60018
Country:US
Phone:708-297-1760
CAGE:MIDWE
Company:MIDWEST INDUSTRIAL SUPPLY INC
Address:1101 3RD ST SE
Box:8431
City:CANTON
State:OH
ZIP:44711
Country:US
Phone:216-456-3121
CAGE:1DJ68

=============  Composition/Information on Ingredients  =============

Name:ACRYLIC & VINYL ACETATE POLYMER
Fraction by Wt: 5-50%
Other REC Limits:NONE RECOMMENDED

Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 50-95%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL:VAPOR FROM STORED UNDILUTED
    PRODUCT CAN CAUSE HEADACHE & NAUSEA.SKIN:STORED,UNDILUTED PRODUCT
    IS SLIGHTLY IRRIT TO SKIN.EYE:SLIGHTLY IRRIT TO EYES.INGEST:MAY BE
    IRRIT TO DIGESTIVE TRACT.
Effects of Overexposure:HEADACHE, NAUSEA, SLIGHTLY IRRITATING TO
    EYE/SKIN, IRRIT DIGESTIVE TRACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/FLOWING WATER @LEAST 15MINS,GET MED
    ATTN.INHAL:MOVE SUBJECT TO FRESH AIR.SKIN:FLUSH W/LARGE AMT OF
    WATER OR WASH W/SOAP/WATER.INGEST:GIVE WATER TO DRINK.CALL
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-COMBUSTIBLE
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NP
Upper Limits:NP
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE 212F. DRIED
    POLYMER FILM CAN BURN BUT WILL NOT SUPPORT COMBUSTION. CORROSIVE TO
    METAL/OXIDIZER:NO.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE/CONTROL SPILL.TRANSFER LIQUID TO
    CONTAINERS FOR RECOVERY OR DISPOSAL.KEEP SPILLS OUT OF SEWERS &
    OPEN BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP IN COOL DRY VENTI STORAGE AREA,IN
    CLSD CNTNR.MINIMIZE CONTACT W/AIR TO PREVENT MICROORGANISM
    CONTAMINATION & REDUCE FORMATION OF SKIN ON SURFACE.
Other Precautions:AVOID FREEZING TEMPERATURES.HANDLE IN WELL VENTILATED
    WORK SPACE.NOT A RESTRICTEDC ARTICLE ACCORDING TO DOT & IATA
    REGS.EPA SARA TITLE III HAZ CLASS:NONE.NON-OSHA
    HAZ(29CFR1910.1200).PRODUCT NOT CONTR OLLED PROD UNDER CANADIAN
    WHMIS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
Ventilation:MECHANICAL EXHASUT AT POINT OF CONTAMINANT.
Protective Gloves:IMPERVIOUS GLOVES RECOMMENDEDED.
Eye Protection:CHEMICAL SPLASH,GOGGLES RECOMMENDED.
Other Protective Equipment:UNDER NORMAL HNDLG CONDITIONS,RISK OF
    EXPOSURE TO RESIDUAL MONOMER IS NEGLIGIBLE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:17
Vapor Density:NP
Spec Gravity:1.01-1.15
pH:4-9.5
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:DILUTABLE
Appearance and Odor:MILKY WHITE LIQUID, CHARACTERISTIC ACRYLIC ODOR
Percent Volatiles by Volume:NP
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NO HAZ REACTIONS ARE EXPECTED TO OCCUR UNDER NORMAL INDUSTRIAL
    CONDITIONS.
Hazardous Decomposition Products:THERMAL DECOMPO IN PRESENCE OF AIR MAY
    YIELD CARBON MONOXIDE &/OR CARBON DIOXIDE & WATER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COAGULATE EMULSION BY STEPWISE ADDITION OF
    FERRIC CHLORIDE & LIME.REMOVE CLEAR SUPERNATANT LIQUID & FLUSH TO
    CHEM SEWER OR LANDFILL.INCINERATE SOLIDS & CONTAMINATED DIKING MATL
    ACCORDING TO LOC/STATE/ FED REGS.DONT REUSE CNTNRS.DONT WELD
    ONMETAL CNTN

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***