=====================  Product Identification  =====================

MSDS NAME:CARTERS RUBBER CEMENT
NIIN:00-281-9244
MSDS Number: BDTDZ
=== Responsible Party ===
Company:DENNISON MFG. CO, CARTER'S INK DIVISION
Address:300 HOWARD STREET
City:FRAMINGHAM
State:MA
ZIP:01701
Info Phone Num:(617)879-0511 X4636
Emergency Phone Num:(617)879-0511 X4636
CAGE:FO467
=== Contractor Identification ===
Company:CARTERS INK CO
Address:275 WYMAN ST
Box:City:WALTHAN
State:MA
ZIP:02154-1218
Country:US
CAGE:03042
Company:DENNISON MFG. COMPANY CARTER'S INK DIV.
Address:300 HOWARD STREET
City:FRAMINGHAM
State:MA
ZIP:01701-8313
Phone:(617) 879-0511
CAGE:FO467

=============  Composition/Information on Ingredients  =============

Name:SOLVENT NAPHTHA
CAS:64742-89-8
Fraction by Wt: 88.6%
Other REC Limits:400 PPM
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE CAN LEAD TO CENTRAL
    NERVOUS SYSTEM DEPRESSION PRODUCING HEADACHES,DIZZINESS,NAUSEA &
    LOSS OF CONSCIOUSNESS.
Explanation of Carcinogenicity:NOT APPLICABLE 
Effects of Overexposure:HEADACHES, DIZZINESS, NAUSEA, LOSS OF
    CONSCIOUSNESS
Medical Cond Aggravated by Exposure:SKIN DISEASE, CHRONIC RESPIRATORY
    DISEASE

=======================  First Aid Measures  =======================

First Aid:EYE:IMME FLUSH W/LGE AMTS OF WTR FOR AT LEAST 15 MIN,CALL
    PHYSICIAN. SKIN:WASH W/SOAP & WTR. INGESTION:DO NOT INDUCE
    VOMITING, GET IMMEDIATE MEDICAL ATTENTION. INHALATION:REMOVE TO
    FRESH AIR. SU PPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION);
    CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:<10F/-12.2C
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:CO*2-FOAM, DRY CHEMICAL, WTR FOG/SPRAY
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:IN CASE OF LGE FIRES,ALSO COOL
    SURROUNDING EQUIPMENT & STRUCTURES W/WTR. DO NOT STORE/MIX W/STRONG
    OXIDANTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID OPEN FLAMES/SPARKS SOURCES. PROVIDE
    ADEQUATE VENTILATION. ADD ABSORBENT (SAWDUST,SAND ETC.)TO SPILL
    AREA. TO AVOID SPILLING, KEEP CAP TIGHTLY CLOSED WHEN NOT USING.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID OPEN FLAMES, SPARK SOURCES,
    SPLASH SPILLING, EXCESSIVE HEAT. KEEP CONTAINERS CLOSED WHEN NOT
    USING.
Other Precautions:CAREFULLY READ ALL DIRECTIONS & CAUTIONS ON PRODUCT
    CONTAINER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
    VAPORS IF EXPOSURE EXCEEDS OCCUPATIONAL LIMITS
Ventilation:LOCAL EXHAUST-IF NEEDED TO CONTROL VAPOR, MECHANICAL -
    EXPLOSION PROOF EQUIPMENT
Protective Gloves:PVA OR NITRILE RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Work Hygienic Practices:WASH HANDS BEFORE EATING; DO NOT SMOKE/USE NEAR
    OPEN FLAMES.
Supplemental Safety and Health
BP:66-107C.PCT VOLT-VOL:N.PH:N. PART NUMBERS FOR PRODUCT ARE:08-450,
    22-848, 22-842, 22-841, 22-840.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:151-225F OR
Melt/Freeze Pt:M.P/F.P Text:N/APPLICABL
Decomp Temp:Decomp Text:N/K 
Vapor Pres:250
Vapor Density:3.3
Spec Gravity:0.72
pH:N/K-FP
Evaporation Rate & Reference:5.8 (BUTYL ACETATE = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BUFF COLOR LIQUID W/HYDROCARBON ODOR
Percent Volatiles by Volume:N/K-FP
Corrosion Rate:

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS LIKE CHLORINE
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE & UNIDENTIFIED ORGANIC
    COMPOUNDS MAY BE FORMED DURING COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:EVAPORATE & PEEL RESIDUE FROM SURFACE. TREAT AS
    A HYDROCARBON. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
    REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***