===================== Product Identification =====================
MSDS NAME:E-BOND 1241 EPOXY HARDENER
NIIN:00F002804
MSDS Number: BBLSY
=== Responsible Party ===
Company:E-BOND EPOXIES, INC. /FT.LAUDERDALE, FL
Emergency Phone Num:(305) 566-6555
CAGE:F6245
=== Contractor Identification ===
Company:E-BOND EPOXIES, INC. /FT.LAUDERDALE, FL
Box:23069
CAGE:F6245
============= Composition/Information on Ingredients =============
Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
===================== Hazards Identification =====================
Effects of Overexposure:SKIN: BURNS, RASH, SENSITATION. EYE: IRRITANT
======================= First Aid Measures =======================
First Aid:SKIN & EYE: FLUSH WITH PLENTY OF WATER WHILE REMOVING
CONTAMINATED CLOTHING AND SHOES. EYE: FLUSH WITH WATER 15 MIN. CALL
PHYS. WASH SKIN WITH SOAP AND WATER. WASH CLOTHING BEFORE RE-USE.
===================== Fire Fighting Measures =====================
Flash Point:215 F TCC
Extinguishing Media:SMALL FIRES: CO2, DRY CHEMICAL. LARGE FIRES: WATER
OR FOAM.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS. PROTECTIVE
CLOTHING.
Unusual Fire/Explosion Hazard:AVOID: EXCESSIVE HEAT, OPEN FLAMES
CONTACT WITH EPOXY RESINS IN MASSES GREATER THAN 1LB.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE EXCESS. FLUSH WITH WATER. SOAK UP IN
ABSORBENT AND FLUSH WITH PLENTY OF WATER
====================== Handling and Storage ======================
Handling and Storage Precautions:CAUTION-CAUSES BURNS. KEEP CONTAINER
CLOSED. AVOID BREATHING VAPORS, SKIN & EYE CONTACT, WASH OROUGHLY
AFTER HANDLING. USE ADEQUATE VENTILATION.
Other Precautions:KEEP CONTAINER CLOSED. USE WITH ADEQUATE VENTILATION
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AIR SUPPLY MASKS/ORGANIC CANISTER MASKS, IF
NEEDED.
Ventilation:LOCAL EXHAUST (PREFERRED) MECHANICAL EXHAUST
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES W/SHIELDS
Other Protective Equipment:SAFETY SHOWER, EYE BATH, OVERALLS OR APRONS
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:20
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG MINERAL ACIDS, STRONG OXIDIZING AGENTS, EPOXY RESIN.
Stability Condition to Avoid:TEMP. ABOVE 300C.
Conditions to Avoid Polymerization:FIRES, EXOTHERM WHEN CURING IN A
LARGE MASS.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE FREE LIQUID. TREAT, STORE, TRANSPORT
& DISPOSE OF ONLY IN A HAZARDOUS WASTE MANAGEMENT FACILITY
PERMITTED UNDER AN AUTHORITY OF THE HAZARDOUS WASTE REGULATIONS OF
RESOURCE CONSERVATION AND RECOVERY ACT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***