=====================  Product Identification  =====================

MSDS NAME:THINNER, 90-53
NIIN:00N069012
MSDS Number: CGQTN
=== Responsible Party ===
Company:SIGMA COATINGS USA BV
Address:1401 DESTREHAN AVE
City:HARVEY
State:LA
ZIP:70059
Country:US
Info Phone Num:504-347-4321
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:JAY FOLSE
CAGE:JO293
=== Contractor Identification ===
Company:SIGMA COATINGS USA B.V.
Address:1401 DESTREHAN AVE
Box:City:HARVEY
State:LA
ZIP:70059
Country:US
Phone:504-347-4321
CAGE:JO293
Company:SIGMA COATINGS USA BV
Address:1401 DESTREHAN AVE
Box:City:HARVEY
State:LA
ZIP:70058-2436
Country:US
Phone:504-347-4321
CAGE:1K005

=============  Composition/Information on Ingredients  =============

Name:PROPYLENE GLYCOL MONOMETHYL ETHER; (1-METHOXY-2-PROPANOL)
    LEL: 1.80%; LD50 (ORAL RAT): 6,600 MG/KG
CAS:107-98-2
RTECS #:UB7700000
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/150 STEL

Name:1-PROPANOL, 2-METHOXY-; (2-METHOXY-1-PROPANOL) LEL: 1.80%
CAS:1589-47-5
RTECS #:UB7645000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:XYLENE (SARA 313) (CERCLA) LEL: 1.00%; LD50 (ORAL RAT):
    4300 MG/KG
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 49.7780%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:BENZENE, ETHYL-; (ETHYL BENZENE) (SARA 313) LEL: 1.00%;
    LD50 (ORAL RAT): 3500 MG/KG
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: 10.1960%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/125 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:SPILL PROC: KEEP OUT OF DRAINS, SEWERS/WATERWAYS. CONT FIRE
    AUTH. NOTIFY LOC HLTH & POLLUTION CONTROL AGENCIES. (ING 6)
RTECS #:9999999ZZ

Name:ING 5: CALL SPILL RESPONSE TEAM IF LARGE SPILL.
RTECS #:9999999ZZ

Name:RESP PROT: IN RESTRICTED VENT AREAS USE NIOSH APPRVD
    CHEM-MECH FILTERS DESIGNED TO REMOVE COMBINATION OF (ING 8)
RTECS #:9999999ZZ

Name:ING 7: PARTICULATE & GAS & VAP. IN CONFINED AREAS USE NIOSH
    APPRVD AIR LINE TYPE RESPS/HOODS. RESP PROT MAY ALSO (ING 9)
RTECS #:9999999ZZ

Name:ING 8: BE NECESSARY IN ANY LATER MANUFACTURING OPERATIONS
    IN WHICH PRODUCT MAY BECOME AIRBORNE IN FORM OF VAPOR/DUST.
RTECS #:9999999ZZ

Name:ING 9: PROD RESIDUES (VAP, LIQUID &/OR SOLID), ALL HAZ
    PRECS GIVEN IN MSDS MUST BE OBSERVED.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SEV IRRIT. MAY CAUSE
    CORNEAL INJURY. SKIN: MAY CAUSE IRRIT & DRYING/DEFAT OR CRACKING, &
    DERM ON RPTD/PRLNG EXPOS. INHAL: MAY CAUSE IRRIT TO UPPER RESP
    TRACT. EXCESS INHAL OF VAPS CAN CAU SE NASAL & RESP IRRIT, DIZZ,
    WEAK, FATG, NAUS, HDCH, POSS UNCON, & EVEN ASPHYXIATION. NOTICE:
    RPTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: HAVE ASSOC RPTD & PRLNG OCCUP OVEREXP
    TO SOLVS W/PERM BRAIN & NERV SYS DMG. INTENTIONAL MISUSE BY
    DELIBERATELY CONCENTRATING & INHALING CONTENTS MAY BE
    HARMFUL/FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/WATER FOR AT LEAST 15 MIN. SEEK MD IMMED. SKIN:
    FLUSH WASH W/COPIOUS AMTS OF WATER. REMOVE CONTAM CLTHG PROMPTLY.
    CONT MD IMMED. INHAL: REMOVE TO FRESH AIR. RESTORE BRTHG IF
    REQUIRED. CO NT MD IMMED. INGEST: RINSE MOUTH IMMED.GIVE 6-8 OUNCES
    OF LIQ. NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERS. DO NOT
    INDUCE VOMIT UNLESS ADVISED BY MD. CONT MD IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point:59.0F,15.0C
Lower Limits:SEE INGS
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL, FOAM, ALCOHOL
    FOAM, OR WATER FOG.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
    WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE USED TO COOL CLSD CONTRS
    EXPOSED TO EXTREME HEAT. IF WATER (SUP DAT)
Unusual Fire/Explosion Hazard:LIQ & VAP IS DANGEROUS FIRE HAZ & MOD
    EXPLO HAZ WHEN EXPOSED TO HEAT/FLAME. HVR/AIR VAPS CAN FLOW ALONG
    SURFS TO DISTANT IGNIT SOURCES & FLASH BACK. (SUP DAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:STAY UPWIND & AWAY FROM SPILL UNLESS WEARING
    APPROP PROT EQUIP. STOP &/OR CONTAIN DISCHARGE IF IT MAY BE DONE
    SAFELY. KEEP ALL SOURCES OF IGNIT AWAY. VENT AREA OF SPILL. USE
    NON-SPKG TOOLS FOR CLEANUP . COVER W/INERT MATL TO REDUCE FUMES.
    (ING 5)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID PROLONGED/REPEATED BREATHING OF
    VAPORS. PERSONAL CONTACT W/PRODUCT SHOULD BE AVOIDED. CONTAINERS OF
    THIS MATL MAY BE HAZARDOUS WHEN EMPTIED.
Other Precautions:SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES
    (VAPOR, LIQUID, AND/OR SOLID), ALL HAZARD PRECAUTIONS GIVEN IN THIS
    MSDS MUST BE OBSERVED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSURE EXCEEDS TLV, USE NIOSH APPROVED
    RESPIRATOR TO PREVENT OVEREXPOSURE. IN OUTDOOR/OPEN AREAS USE NIOSH
    APPROVED MECHANICAL FILTER RESPIRATOR TO REMOVE SOLID AIRBORNE
    PARTICLES OF OVERSPRAY DU RING SPRAY APPLICATION. (ING 7)
Ventilation:USE VENTILATION AS REQUIRED TO CONTROL VAPOR
    CONCENTRATIONS.
Protective Gloves:NATRL RUBBER, NEOPRENE, BUNA N/NITRILE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . WEAR APRON TO AVOID SKIN CONTACT.
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING & USING
    WASHROOM. REMOVE SATURATED CLTHG & FLUSH AFFECTED SKIN AREAS
    W/WATER.
Supplemental Safety and Health
FIRE FIGHT PROC: IS USED, FOG NOZZ ARE PREF. EXPLO HAZ: KEEP CONTRS
    TIGHTLY CLSD. ISOLATE FROM HEAT, ELEC EQUIP, SPKS & OPEN FLAME.
    CLSD CONTR MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. USE SPECIAL
    PRE C TO APPLY TO HOT SURFS. DO NOT USE WELDING/CUTTING TORCH
    ON/NEAR CONTR (EVEN EMPTY) BECAUSE LIQ PROD MAY IGNITE EXPLO.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:<281F,<138C
Vapor Pres:14.700
Vapor Density:3.700
Spec Gravity:0.8900
Evaporation Rate & Reference:0.6600 (ETHER=1)
Appearance and Odor:THIN LIQUID; MODERATE AROMATIC/IRRITATING ODOR
Percent Volatiles by Volume:99.979

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS; CONTACT MAY CAUSE FIRE OR EXPLOSION.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***