=====================  Product Identification  =====================

MSDS NAME:CEILCOTE HARDENER 3C, 58711
NIIN:00N086630
MSDS Number: CHFQN
=== Responsible Party ===
Company:MASTER BUILDERS INC
Address:23700 CHAGRIN BLVD
City:CLEVELAND
State:OH
ZIP:44122
Country:US
Info Phone Num:216-831-5500
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:FO873
=== Contractor Identification ===
Company:MARTIN MARIETTA CHEM MASTER BUILDERS DIV
Address:23700 CHAGRIN BLVD
Box:City:CLEVELAND
State:OH
ZIP:44122-5506
Country:US
Phone:216-831-5500
CAGE:98898
Company:MASTER BUILDERS DIV MARTIN MARIETTA CORP
Address:23700 CHAGRIN BLVD
City:CLEVELAND
State:OH
ZIP:44122-5506
Phone:(216) 831-5500
CAGE:FO873

=============  Composition/Information on Ingredients  =============

Name:2-BUTANONE, PEROXIDE; (METHYL ETHYL KETONE PEROXIDE
    STRUCTURES ACCOUNT FOR 8.8	 9.1% ACTIVE OXYGEN (MEKP)) (CERCLA)
CAS:1338-23-4
RTECS #:EL9450000
Fraction by Wt: <40%
OSHA PEL:C 0.7 PPM
ACGIH TLV:C 0.2 PPM
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

Name:PHTHALIC ACID, DIMETHYL ESTER; (DIMETHYL PHTHALATE) (SARA
    313) (CERCLA)
CAS:131-11-3
RTECS #:TI1575000
Fraction by Wt: 30-50%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:2,4-PENTANEDIOL, 2-METHYL-; (HEXYLENE GLYCOL)
CAS:107-41-5
RTECS #:SA0810000
Fraction by Wt: 5-10%
OSHA PEL:C 25 PPM
ACGIH TLV:C 25 PPM

Name:2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA 313) (CERCLA)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 1-5%
OSHA PEL:200 PPM
ACGIH TLV:200 PPM/300 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:HYDROGEN PEROXIDE (SARA 302)
CAS:7722-84-1
RTECS #:MX0900000
Fraction by Wt: <1%
OSHA PEL:1 PPM
ACGIH TLV:1 PPM

Name:SUPDAT: TO PREVENT ASPIRATION OF LIQUIDS INTO LUNGS. DO NOT
    GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
RTECS #:9999999ZZ

Name:RESP PROT: OSHA REGULATION CFR 29 1910.134 FOR RECOMMENDED
    RESPIRATORY PROTECTION.
RTECS #:9999999ZZ

Name:VENT: HEAVY VAPORS.
RTECS #:9999999ZZ

Name:EYE PROT: & FULL LENGTH FACESHIELD .
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50: (ORAL,RAT) 484 MG/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL: VAPORS CAN BE IRRITATING TO
    NOSE, MUCOUS MEMBRANES, THROAT & UPPER RESPIRATORY TRACT. EYES:
    CONTACT IS EXTREMELY IRRITATING & CORROSIVE. THIS MATL CAN CAUSE
    DAMAGE OR BLINDNESS. SKIN CONT: SHOR T SINGLE EXPOS MAY CAUSE
    MODERATE IRRITATION TO MILD BURN. PROLONGED/REPEATED EXPOSURE MAY
    CAUSE SEVERE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: BURN. SKIN ABSORP: LOW TOXICITY.
    INGEST: CAN RESULT IN BURNS OF MOUTH, ESOPHAGUS & STOMACH. CHRONIC:
    PRODUCT DOES NOT CNTN CARCIN MATLS AS DEFINED BY OSHA HAZ
    COMMUNICATION ACT 1910.1200. AM ES TEST: MUTAGENIC IN SOME STRAINS
    OF SALMONELLA. DIMETHYL PHTHALATE: EXPERIMENTAL TERATOGEN;
    EXPERIMENTAL REPROD EFTS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE FROM EXPOS. IF DFCLTY W/BRTHG, ADMIN OXYG. IF
    BRTHG HAS STOPPED ADMIN ARTF RESP, PREF MOUTH-TO-MOUTH. SEEK MED
    ATTN. EYES: FLUSH W/WATER, LIFTING UPPER & LOWER LIDS OCCASNLY FOR
    @ LST 15  MINS. SEEK MED ATTN. SKIN: REMOVE CONTAMD CLTHG. WASH
    THORO W/SOAP & WATER. IF IRRIT PERSISTS SEEK MED ATTN. WASH CONTAMD
    CLTHG BEFORE REUSE. INGEST: DO NOT INDUCE VOMIT; GIVE LG QTYS OF
    (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:137F,58C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL & WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . USE WATER TO COOL CONTAINERS EXPOSED TO FIRE.
    ELECTRICAL GROUNDING IS NOT RECOMMENDED.
Unusual Fire/Explosion Hazard:AT HIGHER TEMPERATURE VAPORS CAN CAUSE
    PRESSURE BUILD UP IN SEALED CONTAINERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. ELIMINATE ALL SOURCES OF
    IGNITION. WEAR APPROP PROTECTIVE GEAR, CONTAIN LEAK/SPILL, SALVAGE,
    CLEAN UP RESIDUE W/NONCOMBUSTIBLE, NON-ACIDIC ABSORBENT MATERIAL
    LIKE SAND OR SODA ASH. WAS H DOWN AREA WITH DETERGENT & WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR RESP PROT WHENEVER AIRBORNE CONCS EXCEED
    TLV CEILINGS/TWA, USE NIOSH APPRVD RESPS EQUIPPED W/ORG VAP
    CARTRIDGE FOR LISTED HAZ. CONFINED SPACES, ROOMS/TANKS ARE AREAS
    WHERE CONCERN FOR TLV'S IS EX PECIALLY IMPORTANT. REFERENCE (ING 7)
Ventilation:VENT IS REC. AIR MOVEMENT MUST BE DESIGNED TO INSURE
    TURNOVER @ ALL LOCATIONS IN WORK AREA TO AVOID BUILD UP OF (ING 8)
Protective Gloves:RUBBER LATEX GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 9)
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
    SELECTION OF SPECIFIC ITEMS SUCH AS BOOTS & APRON WILL DEPEND ON
    OPERATION.
Work Hygienic Practices:DO NOT WEAR CONTACT LENSES WHEN WORKING WITH
    THIS MATERIAL.
Supplemental Safety and Health
CNDTNS TO AVOID: BUILDUP & CNTNR FAILURE/EXPLO. EXCESS HEAT, FUMES &
    SMOKE CAN OCCUR IF PROD IS NOT MIXED & USED ACCORDING TO
    DIRECTIONS. NOT SENSITIVE TO MECH IMPACT. HAZ DECOMP PROD:
    HYDROCARBONS FR OM INCOMPLETE COMBUST. FIRST AID PROC: WATER; GET
    IMMED MED ATTN. IF VOMIT OCCURS SPONT, KEEP HEAD BELOW HIPS (ING 6)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:DECOMPOSES
Vapor Density:> AIR
Spec Gravity:1.07
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NONE
Appearance and Odor:CLEAR OR RED LIQUID. SHARP AROMATIC ODOR.
Percent Volatiles by Volume:20

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING & REDUCING AGENTS, ACID, ISOCYANATES, ORGANIC COBALTS AMINES
    METAL SALTS MAY RSLT IN VIOLENT EXPLOSIVE RXN.
Stability Condition to Avoid:AVOID TEMPS >140F AND/OR CONTAM. HIGHER
    TEMPS AND/OR CONTAM PROMOTES EXOTHERMIC DECOMP POSSIBLY LEADING TO
    PRESS(SUPDAT)
Hazardous Decomposition Products:DENSE SMOKE & INTENSE HEAT. OXIDES OF
    CARBON & NITROGEN; KETONES, ALCOHOLS, METHANE, ETHANE, PHENOLS, &
    VARIOUS (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:HANDLE DISP OF WASTE MATL IN MANNER WHICH
    COMPLIES WITH LOCAL, STATE, PROVINCE & FEDERAL REG. INCINERATE @
    AGENCY APPRVD WASTE-DISP FACILITIES. PROD IS LISTED AS HAZ WAS REG.
    CFR 261.33(F) AS U160. EM PTY CNTNRS SHOULD BE THORO WASHED BEFORE
    DISP.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***