===================== Product Identification =====================
MSDS NAME:HANDI-FOAM ONE-COMPONENT FOAM SEALANT
NIIN:00F056437
MSDS Number: CHNCV
=== Responsible Party ===
Company:FOMO PRODUCTS INC
Address:2775 BARBER RD
Box:1078
City:NORTON
State:OH
ZIP:44203
Country:US
Info Phone Num:800-321-5585
Emergency Phone Num:216-753-4585
Preparer's Name:T EBERLING
CAGE:0AVR2
=== Contractor Identification ===
Company:FOMO PRODUCTS INC
Box:4261
City:NORTON
State:OH
ZIP:44203
Country:US
Phone:800-321-5585;216-753-4585
CAGE:0AVR2
============= Composition/Information on Ingredients =============
Name:HIGHER OLIGOMERS OF MDI, POLYMETHYLENE POLYPHENYLENE
POLYISOCYANATE
CAS:9016-87-9
RTECS #:TR0350000
Fraction by Wt: <14%
Name:ETHANE, 1-CHLORO-1,1-DIFLUORO-, CHLORODIFLUOROETHANE (DOT),
FREON 142, DIFLUOROROMONOCHLOROETHANE
CAS:75-68-3
RTECS #:KH7650000
Ozone Depleting Chemical:2
Name:CHLORODIFLUOROMETHANE, FREON 22, MONOCHLORODIFLUOROMETHANE
(SUSPECTED ANIMAL CARCINOGEN BY-IARC GROUP 3) *98-2*
CAS:75-45-6
RTECS #:PA6390000
Other REC Limits:1000 PPM
OSHA PEL:1000 PPM
ACGIH TLV:3540 MG/CUM
Ozone Depleting Chemical:2
Name:FLUOROCARBON (NON-FLAMMABLE COMPRESSED GAS,
HYDROFLUOROALKANE)
Fraction by Wt: <30%
Name:DIPHENYLMETHANEDIISOCYANATE (MDI), METHYLENE BIS
(PHENYLISOCYANATE), 4,4 DIPHENYLMETHANE DIISOCYANATE (MDI)
CAS:101-68-8
RTECS #:NQ9350000
Fraction by Wt: <14%
Other REC Limits:0.005 PPM
OSHA PEL:0.02 PPM
ACGIH TLV:0.051 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY IRRITATE MUCOUS
MEMBRANES. OVEREXPOSURE CAN LEAD TO BRONCHITIS & PULMONARY EDEMA.
PERSONS W/CARDIAC ARRHYTHMIA MAY BE AT RISK. SKIN: IRRITATION & MAY
LEAD TO SENSITIZATION/DERMATITIS. EYES: IRRITATION & PHYSICAL
DAMAGE. INGESTION: IRRITATION OF MUCOUS MEMBRANES IN MOUTH &
DIGESTIVE TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, TIGHTNESS IN CHEST, COUGHING,
ALLERGIC ASTHMA SENSITIVITY, LIGHTHEADEDNESS, HEADACHES, LEATHARGY,
REDDENING, SWELLING.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN/CPR IF NEEDED.
EYES: FLUSH W/CLEAN WATER FOR 15 MINS. SKIN: USE A RAG TO REMOVE
EXCESS FOAM, THEN A MILD SOLVENT TO REMOVE RESIDUE. WASH W/SOAP &
WATER/USE A MILD CREAM. INGESTION: DON'T INDUCE VOMITING. DRINK
1-2 GLASSES OF WATER/MILK.DON'T GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:800F
Extinguishing Media:DRY CHEMICAL, CO2, HALON 1211, CHEMICAL FOAM/WATER
SPRAY.
Fire Fighting Procedures:WEAR SCBA.
Unusual Fire/Explosion Hazard:HIGH TEMPS MAY LEAD TO RUPTURING. CURED
FOAM IS ORGANIC & WILL BURN IN THE PRESENCE OF SUFFICIENT HEAT,
OXYGEN & IGNITION.
================== Accidental Release Measures ==================
Spill Release Procedures:PROVIDE ADEQUATE VENTILATION & WEAR PROTECTIVE
CLOTHING. SCRAPE UP & REMOVE RESIDUE W/A RAG & SOLVENT(HANDI-FOAM
CLEAN/MINERAL SPIRITS/ACETONE/NAIL POLISH REMOVER/PAINT THINNER).
ONCE FOAM HAS CURED, REMOVE BY SCRAPING/BUFFING.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. IDEAL
STORAGE TEMPS IS 6F TO 80F. STORAGE >90F WILL SHORTEN THE SHELF
LIFE. PROTECT CONTAINERS FROM PHYSICAL DAMAGE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF VAPOR LEVELS ARE EXPECTED TO EXCEED, USE
NIOSH/MSHA APPROVED POSITIVE PRESSURE SUPPLIED AIR RESPIRATOR.
Ventilation:ADEQUATE: SO LEVELS DON'T EXCEED RECOMMENDED LIMITS.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES
Other Protective Equipment:LONG SLEEVE WORK CLOTHES, PROTECTIVE
EQUIPMENT.
Supplemental Safety and Health
PRODUCT IS A LIQUID URETHANE PREPOLYMER MIXTURE THAT IS PACKAGED UNDER
PRESSURE(NON-FLAMMABLE COMPRESSED GAS). CONTAINERS SHOULD NOT BE
HEATED >120F TO AVOID EXCESSIVE PRESSURE BUILDUP. THE BOILING PO
INT IS FOR THE FLUOROCARBON COMPONENT.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:<0F
Spec Gravity:1.2
Solubility in Water:INSOLUBLE
Appearance and Odor:VISCOUS LIQUID; OFF WHITE TO YELLOWISH FROTH W/A
SLIGHT FLUOROCARBON ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ALCOHOLS, STRONG BASES/AMINES & METAL COMPOUNDS.
Stability Condition to Avoid:TEMPS >120F.
Hazardous Decomposition Products:CO, CO2, NITRIC OXIDE, HYDROGEN
CYANIDE, HYDROGEN FLUORIDE, HYDROGEN CHLORIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE AS PLASTIC WASTE(FOAM PLASTIC),
IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|