=====================  Product Identification  =====================

MSDS NAME:PH680001 DARK BEIGE AEROSOL PAINT
NIIN:00F056380
MSDS Number: CHPMW
=== Responsible Party ===
Company:CUSTOM AEROSOL PACKAGING
Address:128 E WATER STREET
Box:1411
City:PIQUA
State:OH
ZIP:45356-5000
Country:US
Info Phone Num:513-773-1824
Emergency Phone Num:800-535-5053
CAGE:0G0J3
=== Contractor Identification ===
Company:CUSTOM AEROSOL PACKAGING
Address:128 E WATER ST
Box:City:PIQUA
State:OH
ZIP:45356
Country:US
Phone:513-773-1824
CAGE:0G0J3

=============  Composition/Information on Ingredients  =============

Name:BENZIN, NAPHTHA, MINERAL SPIRITS, PETROLEUM NAPHTHA
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 10%
Other REC Limits:STEL 400 PPM
OSHA PEL:100 PPM
ACGIH TLV:300 PPM

Name:XYLENE, DIMETHYLBENZENE, XYLOL     (IARC - GROUP 3)  *98-2*
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: >5%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:SEC-BUTANOL ALCOHOL  *98-2*
CAS:78-92-2
RTECS #:EO1750000
Fraction by Wt: >5%
Other REC Limits:100 PPM
OSHA PEL:150 PPM
ACGIH TLV:303 MG/CUM

Name:V M & P NAPHTHA, LIGROINE, MINERAL SPIRITS *98-2*
CAS:8032-32-4
RTECS #:OI6180000
Fraction by Wt: >5%
Other REC Limits:STEL 400 PPM
ACGIH TLV:300 PPM

Name:ACETONE; DIMETHYL KETONE; 2-PROPANONE   *98-2*
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 30%
OSHA PEL:2400 MG/CUM
ACGIH TLV:750 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:PROPANE (DIMETHYLMETHANE)	*98-2*
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 10%
Other REC Limits:1800 MG/CUM
OSHA PEL:1000 PPM
ACGIH TLV:SIMPLE ASPHYXIANT

Name:ISOBUTANE, 2-METHYLPROPANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 10%
Other REC Limits:1000 PPM
OSHA PEL:1800 MG/CUM
ACGIH TLV:1000 PPM

Name:TOLUENE,TOLUOL (IARC CARC- GROUP 3)     *98-2*
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: >5%
Other REC Limits:375 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:2-BUTOXYETHANOL (ETHYLENE GLYCOL MONOBUTYL ETHER), BUTYL
    CELLOSOLVE, BUTYL GLYCOL, GLYCOL ETHER EB	 *98-2*
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: >5%
Other REC Limits:25 PPM (SKIN)
OSHA PEL:50 PPM (SKIN)
ACGIH TLV:25 PPM (SKIN)

Name:PROPYLENE GLYCOL METHYL ETHER (1-METHOXY-2-PROPANOL)       
    PROPYLENE GLYCOL MONO METHYL ETHER *98-2*
CAS:107-98-2
RTECS #:UB7700000
Fraction by Wt: >5%
Other REC Limits:100 PPM
ACGIH TLV:100 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES/SKIN:
    PRIMARY IRRITANT. INHALATION: VAPORS ARE ANESTHETIC, WILL IRRITATE
    THE RESPIRATORY TRACT & CAUSE NERVOUS SYSTEM DEPRESSION.
    REPEATED/PROLONGED OVEREXPOSURE TO SOLV ENTS MAY CAUSE PERMANENT
    BRAIN & NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DROWSINESS, LIGHTHEADEDNESS,
    HEADACHE, DIZZINESS, STAGGERING, CONFUSION, UNCONSCIOUSNESS, COMA

=======================  First Aid Measures  =======================

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
    W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
    INHALATION: REMOVE TO FRESH AIR. APPLY CPR/OXYGEN IF NECESSARY.
    OBTAIN MEDICA L ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:<0F
Lower Limits:2.3
Extinguishing Media:CO2, DRY CHEMICAL/FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE BUT MAY BE USED
    TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE
    PREFERRED. WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED, AWAY FROM
    HOT SURFACES & IGNITION SOURCES. CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT. TOXIC GASES MAY FORM.(SUP

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES & PROVIDE MAXIMUM
    VENTILATION. EQUIP PERSONNEL W/PROPER RESPIRATORY, SKIN & EYE
    PROTECTION. TAKE UP MATERIAL W/SAWDUST, VERMICULITE/OTHER ABSORBENT
    & PLACE IN CONTAINERS FO R DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F. KEEP AWAY FROM
    IGNITION SOURCES. DON'T PUNCTURE. KEEP OUT OF REACH OF CHILDREN.
    USE ONLY AROUND EXPLOSION PROOF EQUIPMENT.
Other Precautions:AVOID PROLONGED BREATHING OF VAPORS. AVOID CONTACT
    W/SKIN. DON'T TAKE INTERNALLY. INTENTIONAL MISUSE BY DELIBERATELY
    CONCENTRATING & INHALING THE CONTENTS OF THE AEROSOL CAN BE
    HARMFUL/FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH/MSHA APPROVED (TC-23-C)
    PAINT/SPRAY/(TC-19-C) AIR SUPPLIED RESPIRATOR.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP THE CONCENTRATION
    BELOW THE EXPOSURE LIMITS & LEL BELOW STATED LIMITS.
Protective Gloves:LATEX/NITRILE RUBBER
Eye Protection:CHEMICAL TYPE GOGGLES/FACE SHIELD
Other Protective Equipment:PROTECTIVE CLOTHING, APRON MADE OF
    LATEX/NITRILE RUBBER
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE
Supplemental Safety and Health
FIRE HAZ CONT'D: AEROSOL CONTAINERS HOLD EXTREMELY FLAMMABLE GAS &
    FLAMMABLE LIQUID UNDER PRESSURE. VENTILATION REQUIREMENTS ALSO
    NEEDED TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING/FLAME
    CUTTING O N SURFACES COATED W/THIS PRODUCT.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:<0F
Vapor Pres:<78
Vapor Density:>1
Spec Gravity:0.7-0.8
Evaporation Rate & Reference:(BU0AC=100): <57
Solubility in Water:21-4%
Percent Volatiles by Volume:85-96

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
    FLAMES, HOT SURFACES & OTHER IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2 WHEN HEATED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DON'T INCINERATE CLOSED CONTAINERS. DISPOSE OF
    IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***