=====================  Product Identification  =====================

MSDS NAME:STATGUARD CONDUCTIVE FLOOR FINISH
NIIN:00N029143
Status Code:A
MSDS Number: CHSYQ
=== Responsible Party ===
Company:CHARLESWATER PRODUCTS INC
Address:93 BORDER STREET
City:WEST MEWTON
State:MA
ZIP:02165
Country:US
Info Phone Num:617-965-8370
Emergency Phone Num:800-255-3924
CAGE:63070
=== Contractor Identification ===
Company:CHARLESWATER PRODUCTS,INC.
Address:93-BORDER STREET
City:WEST MEWTON
State:MA
ZIP:02165-2013
Country:US
Phone:617-964-8370
CAGE:63070

=============  Composition/Information on Ingredients  =============

Name:MODIFIED ACRYLIC POLYMER (NONHAZARDOUS)
Fraction by Wt: 35-40%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:WAX EMULSION; (EMULSIFIED WAXES) (NONHAZARDOUS)
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:WATER; (H*2O) (NONHAZARDOUS)
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: BALANCE
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:DIPROPYLENE GLYCOL MONOMETHYL ETHER
CAS:34590-94-8
RTECS #:JM1575000
Fraction by Wt: 3-4%
OSHA PEL:100 PPM, S
ACGIH TLV:100 PPM;150 STEL, S

Name:DIETHYLENE GLYCOL MONOETHYL ETHER
CAS:111-90-0
RTECS #:KK8750000
Fraction by Wt: 2-3%
Other REC Limits:30 PPM (MFR)
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:AMMONIA (SARA 302/313) (CERCLA)
CAS:7664-41-7
RTECS #:BO0875000
Fraction by Wt: 0.01%MAX
OSHA PEL:50 PPM
ACGIH TLV:25 PPM;35 STEL
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION:MINOR IRRITATION.
    SKIN/EYES:SLIGHT IRRITATION. INGESTION:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:OVEREXPOSURE MAY AGGRAVATE ASTHMA.

=======================  First Aid Measures  =======================

First Aid:INHAL:MOVE SUBJECT TO FRESH AIR. SKIN:WASH W/SOAP & WATER.
    INGEST:DRINK SEVERAL GLASSES OF WATER (DO NOT INDUCE VOMITING).
    CONTACT MD. EYES:FLUSH FOR AT LEAST 15 MINUTES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOAM, CO*2, DRY CHEMICAL & WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:KEEP SPECTATORS AWAY. DIKE & CONTAIN SPILL
    W/INERT MATERIAL (E.G., SAND, EARTH). KEEP SPILLS & CLEANING
    RUNOFFS OUT OF MUNICIPAL SEWERS & OPEN BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORAGE TEMPERATURE: MAX - 49C/120F;
    MIN 1C/34F.
Other Precautions:KEEP FROM FREEZING - PRODUCT MAY COAGULATE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH APPROVED RESPIRATOR WHERE EXPOSURE
    LIMITS ARE EXCEEDED.
Ventilation:LOCAL EXHAUST:MECHANICAL AT POINT OF CONTAMINATION
    RELEASES.
Protective Gloves:IMPERVIOUS/NEOPRENE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH SKIN W/SOAP & WATER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:>1 (H*2O=1)
pH:8-9
Solubility in Water:COMPLETE
Appearance and Odor:OPAQUE, TAN LIQUID W/WAX OR AMMONIACAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:TEMPERATURES ABOVE 49C/120F & BELOW
    1C/34F.
Hazardous Decomposition Products:NONE KNOWN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COAGULATE EMULSION BY STEPWISE OF FERRIC
    CHLORIDE & LIME. REMOVE CLEAR SUPERNATENT LIQUID & FLUSH TO
    CHEMICAL SEWER. INCINERATE SOLIDS & CONTAMINATED DIKING MATERIAL
    ACCORDING TO LOCAL, STATE & FEDERA L REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***