=====================  Product Identification  =====================

MSDS NAME:PX0424, PETROLEUM SPIRITS, PETROLEUM (SUPDAT)
NIIN:00N088313
Status Code:A
MSDS Number: CHTKQ
=== Responsible Party ===
Company:EM SCIENCE
Address:480 DEMOCRAT RD
Box:70
City:GIBBSTOWN
State:NJ
ZIP:08027
Country:US
Info Phone Num:609-423-6300
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:DO242
=== Contractor Identification ===
Company:E M SCIENCE DIV OF E M INDUSTRIES INC
Address:480 DEMOCRAT ROAD
Box:70
City:GIBBSTOWN
State:NJ
ZIP:08027
Country:US
Phone:800-222-0342/609-423-6300
CAGE:63612
Company:EM SCIENCE
Address:480 DEMOCRAT RD
City:GIBBSTOWN
State:NJ
ZIP:08927
Phone:800-424-9300 (CHEMTREC)
CAGE:DO242

=============  Composition/Information on Ingredients  =============

Name:ISOHEXANE; (2-METHYLPENTANE)
CAS:107-83-5
RTECS #:SA2995000
Fraction by Wt: 1-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:PENTANE
CAS:109-66-0
RTECS #:RZ9450000
Fraction by Wt: 60-80%
OSHA PEL:1000 PPM
ACGIH TLV:600 PPM/750 STEL

Name:CYCLOPENTANE
CAS:287-92-3
RTECS #:GY2390000
Fraction by Wt: 1-5%
OSHA PEL:600 PPM
ACGIH TLV:600 PPM

Name:NEOHEXANE; (BUTANE, 2,2-DIMETHYL-)
CAS:75-83-2
RTECS #:EJ9300000
Fraction by Wt: 1-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:2,3-DIMETHYLBUTANE
CAS:79-29-8
RTECS #:EJ9350000
Fraction by Wt: 1-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:3-METHYL PENTANE; (PENTANE, 3-METHYL-)
CAS:96-14-0
RTECS #:SA2995500
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:ISOPENTANE
CAS:78-78-4
RTECS #:EK4430000
Fraction by Wt: 1-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SUPDAT: BE PROVIDED THRU EM SCIENCE TECHNICAL SERVICE
    DEPARTMENT (609) 423-6300. FOLLOWING EM SCIENCE SPILL-X (ING 9)
RTECS #:9999999ZZ

Name:ING 8: ABSORBENT IS RECOMMENDED FOR THIS PRODUCT: SX0863
    SOLVENT SPILL TREATMENT KIT.
RTECS #:9999999ZZ

Name:RESP PROT: CONDITIONS (SEE YOUR SAFETY EQUIPMENT SUPPLIER).
    ENGINEERING AND/OR ADMINISTRATIVE CONTROLS SHOULD (ING 11)
RTECS #:9999999ZZ

Name:ING 10: BE IMPLEMENTED TO REDUCE EXPOSURE.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF INHALED OR
    SWALLOWED. IRRITATING ON CONTACT WITH SKIN, EYES OR MUCOUS
    MEMBRANES. VAPOR IRRITATING TO EYES AND RESPIRATORY PASSAGES. MAY
    CAUSE KIDNEY DAMAGE. NAUSEA, DIZZINESS, CENTRA L NERVOUS SYSTEM
    DEPRESSION, RESPIRATORY AND CARDIAC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:HEART, KIDNEY, AND RESPIRATORY
    CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE. SKIN:
    IMMED FLUSH THOROUGHLY W/LG AMTS OF WATER. EYES: IMMED FLUSH
    THOROUGHLY W/WATER FOR AT LST 15 MINUTES. INHALATION: REMOVE TO
    FRESH AIR; GIVE  ARTIFICIAL RESPIRATION IF BREATHING HAS STOPPED.
    INGESTION: CALL PHYSICIAN IMMED. ONLY INDUCE VOMITING AT
    INSTRUCTION OF PHYSICIAN. NEVER GIVE ANYTHING BY MOUTH TO
    UNCONSCIOUS PERSON.

=====================  Fire Fighting Measures  =====================

Flash Point:-50F,-46C
Lower Limits:1.10%
Upper Limits:5.90%
Extinguishing Media:CO*2, DRY CHEMICAL, "ALCOHOL" FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:DANGEROUS FIRE AND EXPLOSIVE HAZARD.
    CONFINED MATERIAL MAY EXPLODE UPON HEATING. VAPOR CAN TRAVEL
    DISTANCES TO IGNITION SOURCE AND FLASH BACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE AREA OF ALL UNNEC PERSONNEL. WEAR
    SUITABLE PROT EQUIP LISTED. ELIM ANY IGNIT SOURCES UNTIL AREA IS
    DETERM TO BE FREE FROM EXPLO/FIRE HAZARDS. CNTN RELEASE & ELIM ITS
    SOURCE, IF THIS CAN BE DO NE W/OUT RISK. TAKE UP & CONTAINERIZE FOR
    (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
    IN A COOL AREA AWAY FROM IGNITION SOURCES & OXIDIZERS. DO NOT
    BREATHE VAPOR.
Other Precautions:DO NOT GET IN EYES, ON SKIN, OR ON CLOTHING. RETAINED
    RESIDUE MAY MAKE EMPTY CONTAINERS HAZARDOUS; USE CAUTION!
    ELECTRICALLY GROUND ALL EQUIPMENT WHEN HANDLING THIS PRODUCT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF WORKPLACE EXPOS LIMIT(S) OF PROD/ANY
    COMPONENT IS EXCEEDED (SEE TLV/PEL), NIOSH APPRVD AIR SUPPLIED RESP
    IS ADVISED IN ABSENCE OF PROPER ENVIRONMENTAL CTL. OSHA REGS ALSO
    PERMIT OTHER NIOSH RESPS ( NEG PRESS TYPE) UNDER SPECIFIED (ING 10)
Ventilation:MATERIAL SHOULD BE HANDLED OR TRANSFERRED IN APPROVED FUME
    HOOD OR WITH ADEQUATE VENTILATION.
Protective Gloves:NITRILE, VITON/EQUIVALENT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
    IMPERVIOUS PROTECTIVE CLOTHING SHOULD BE WORN TO PREVENT SKIN
    CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT TAKE
    INTERNALLY.
Supplemental Safety and Health
MFR TRADE NAME/PART NO: NAPTHA, BENZINE. SPILL PROC: PROPER DISP AS
    DESCRIBED UNDER DISP. COMPLY W/FED, STATE, & LOC REGS ON RPTG
    RELEASES. REFER TO REGULATORY INFO FOR REPORTABLE QTY & OTHER
    REGULATO RY DATA. EM SCIENCE RECOMMENDS SPILL-X ABSORB AGENTS FOR
    VARIOUS TYPES OF SPILL. ADDNL INFO ON SPILL-X PRODS CAN (ING 8)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>86F,>30C
Melt/Freeze Pt:M.P/F.P Text:<-40F,<-40C
Vapor Pres:40 @ 20C
Vapor Density:2.5
Spec Gravity:0.642 (H*2O=1)
Evaporation Rate & Reference:10 (BUAC =1)
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS LIQUID, GASOLINE-LIKE ODOR.
Percent Volatiles by Volume:99.9+

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:HEAT; CONTACT WITH IGNITION SOURCE.
Hazardous Decomposition Products:CO*X.

====================  Disposal Considerations  ====================

Waste Disposal Methods:EPA WASTE NOS: D001. TREATMENT: INCINERATION,
    FUELS BLENDING/RECYCLE. CONTACT LOCAL PERMITTED WASTE DISP SITE
    (TSD) FOR PERMISSIBLE TREATMENT SITES. ALWAYS CONT PERMITTED WASTE
    DISPOSER (TSD) TO ASSUR E COMPLIANCE W/ALL CURRENT LOC, STATE &FED
    REGS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***