=====================  Product Identification  =====================

MSDS NAME:FP-07P01, MIL-P-24441/1/20 F-150A COMP (SUPDAT)
NIIN:00N087908
MSDS Number: CHTGT
=== Responsible Party ===
Company:SHERWIN-WILLIAMS SEAGUARD
Address:3560 ELM AVE
City:PORTSMOUTH
State:VA
ZIP:23704
Country:US
Info Phone Num:757-397-2223
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:NSO
CAGE:DO642
=== Contractor Identification ===
Company:SHERWIN-WILLIAMS CO THE SPECIALTY DIV.
Address:6830 COCHRAN RD.
Box:6709
City:SOLON
State:OH
ZIP:44139-3908
Phone:216-292-7400
CAGE:DO642
Company:SHERWIN-WILLIAMS, SEAGUARD
Address:3560 ELM AVE.
Box:City:PORTSMOUTH
State:VA
ZIP:23704
Country:US
Phone:757-397-2223
CAGE:60163

=============  Composition/Information on Ingredients  =============

Name:TITANIUM DIOXIDE. VP: 0.0 @ 20C
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 15%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9495

Name:C.I. PIGMENT YELLOW 42; (YELLOW IRON OXIDE PIGMENT). VP:
    0.0 @ 20C
CAS:51274-00-1
Fraction by Wt: 5%
OSHA PEL:N/K 
ACGIH TLV:5 MG/M3 (MFR)

Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
    SILICATE (MN-500)). VP: 0.0 20C.
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 40%
OSHA PEL:20 MPPCF Z-3
ACGIH TLV:2 MG/M3 RDUST; 9495

Name:N-BUTYL ALCOHOL (SARA 313) (CERCLA). VP: 4.4 @ 20C
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 30%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9495
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:POLYAMIDE. VP: 0.0 @ 20C
Fraction by Wt: 20%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:BREATHING OF HIGH VAPOR CONCENTRATIONS
    MAY PRODUCE NARCOSIS. LIQUID MAY CAUSE MINOR SKIN IRRITATION AND
    DEFINITE EYE IRRITATION. CAUSES NOSE AND THROAT IRRITATION. CAUSES
    EYE IRRITATION. CAUSES SKIN I RRITATION. MAY BE HARMFUL IF ABSORBED
    THROUGH SKIN. REPEATED AND PROLONGED OVEREXPOSURE TO SOLVENTS (EFTS
    OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: COULD CAUSE PERMANENT BRAIN & NERVOUS
    SYSTEM DAMAGE. INTENTION MISUSE BY DELIBERATELY CONCENTRATING &
    INHALING CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR, RESTORE BREATHING. CONSULT A MD.
    SKIN CONTACT: FLUSH WITH WATER. EYE CONTACT: FLUSH IMMEDIATELY WITH
    LARGE AMOUNTS OF WATER. CONSULT A MD. FIRST AID: IF CONTACT,
    IMMEDIATEL Y FLUSH EYES/SKIN WITH PLENTY OF WATER FOR AT LEAST 15
    MINUTES WHILE REMOVING CONTAMINATED CLOTHING/SHOES. GET IMMED
    MEDICAL ATTN WASH COTHING BEFORE REUSE. DESTROY SHOES. INGEST: GET
    MED ATTN IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:99.0F,37.2C
Lower Limits:1.0%
Upper Limits:11.2%
Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . WATER MAY BE USED TO COOL CONTAINERS. IF WATER IS USED
    FOG NOZZLES ARE PREFERRED.
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. VAPS MAY
    MIGRATE TO IGNIT SOURCE & CAUSE FLASH FIRE. ISOLATE FROM HEAT,
    SPARKS, ELEC EQUIP, APPLIANCES, PILOT LIGHTS, & LIGHTS, FLAMES AND
    OTHER SOURCES OF IGNITION. FLAMMABL E LIQUID AND VAPOR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IN CASE OF SPILLAGE ABSORB WITH INERT MATERIAL
    AND DISPOSE OF IN ACCORDANCE WITH APPLICABLE REGULATIONS OF E.P.A.
    AND OTHER LOCAL, STATE, AND FEDERAL AUTHORITIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM HEAT, SPRAKS AND OPEN
    FLAME. AVOID PROLONGED SKIN CONTACT. DO NOT BREATHE SPRAY MIST.
Other Precautions:STORE IN A COOL, DRY AREA W/VENT SUITABLE FOR STORING
    MATLS SHOWN IN SECTION 2. GROUND CNTNRS WHILE POURING. AVOID
    SPONTANEOUS COMBUSTION OF CONTAMD RAGS/OTHER ORGANIC MATERIALS.
    EMPTY CNTNRS MAY RETA IN HAZ PROPERTIES & CAN BE DANGEROUS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPRVD RESP TYPES SUITABLE FOR MATLS IN
    SECTION 2 REC. NIOSH APPRVD CHEM/MECH FILTERS REC WHEN VENT IS
    RESTRICTED. DO NOT BREATHE (DUST, VAPS/SPRAY MIST). WEAR APPROP,
    RESP (NIOSH/APPROVED) DURI NG & AFTER APPLICATION UNLESS AIR
    MONITORING RECORDS VAPOR/MIST LEVELS BELOW APPLICABLE LIMITS.
    FOLLOW RESPIRATOR MFR DIRECTIONS FOR USE.
Ventilation:SUFFICIENT VENT, IN VOL & PATTERN, SHOULD BE PROVIDED TO
    KEEP AIR CONTAM BELOW CURRENT APPLIC OSHA PERMISSIBLE EXPOSURE
    LIMIT OR ACGIH'S TLV LIMIT. (SUPDAT)
Protective Gloves:CHEM RESISTANT PLASTIC OR RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
    AS REQD TO AVOID WETTING CLTHG. USE PROT CREAMS WHERE SKIN CONTACT
    IS LIKELY. REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Work Hygienic Practices:AVOID CONTACT WITH EYES, SKIN, AND CLOTHING.
    WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
MFR'S TRADE NAME/PART #: TYI & TYIII ORGANIC COATING.	VENT: USE
    W/ADEQ VENT.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>243F,>117C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.4 
VOC Pounds/Gallon:380
VOC Grams/Liter:3.16
Evaporation Rate & Reference:IS SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:LIQUID; ALCOHOL ODOR.
Percent Volatiles by Volume:48.1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OR OPEN FLAME.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE IN CLOSED CONTAINERS. DISPOSE OF PRODUCT
    IN ACCORDANCE WITH LOCAL, COUNTY, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***