=====================  Product Identification  =====================

MSDS NAME:AMERCOAT 10 THINNER
NIIN:00-466-5917
MSDS Number: BDZMX
=== Responsible Party ===
Company:AMERON PROTECTIVE COATINGS DIV
Address:201 N BERRY ST
City:BREA
State:CA
ZIP:92622-1020
Country:US
Info Phone Num:714-529-1951
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:0Y2E4
=== Contractor Identification ===
Company:AMERON INTERNATIONAL PROTECTIVE COATINGS GROUP
Address:201 NORTH BERRY ST.
Box:City:BREA
State:CA
ZIP:92821
Country:US
Phone:714-529-1951
CAGE:55849
Company:AMERON PROTECTIVE COATINGS
Address:201 NORTH BERRY STREET
Box:1020
City:BREA
State:CA
ZIP:92622-1020
Country:US
Phone:714-529-1951
CAGE:0Y2E4

=============  Composition/Information on Ingredients  =============

Name:METHYL ISOBUTYL KETONE  (SARA III)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 40.0%
OSHA PEL:100 PPM/75 STEL
ACGIH TLV:50 PPM/75 STEL; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:PARAFFIN WAX
CAS:8002-74-2
RTECS #:RV0350000
Fraction by Wt: 13.8%
OSHA PEL:2 MG/M3 (FUME)
ACGIH TLV:2 MG/M3 (FUME); 9192

Name:AROMATICS (MFG STATES: CONTAINS NO BENZENE)
Fraction by Wt: 46.2%

=====================  Hazards Identification  =====================

Effects of Overexposure:CAN IRRIT. SKIN, NOSE & EYES. EXCESSIVE
    EXPOSURE CAN CAUSE NAUSEA, VOMITING, DIZZINESS.

=======================  First Aid Measures  =======================

First Aid:VAPOR: PROVIDE FRESH AIR. SKIN: WASH W/SOAP & WATER. EYES:
    FLUSH IMMEDIATELY W/WATER AT LEAST 15 MIN. GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:36F,2.2C
Lower Limits:0.9%
Upper Limits:7.5%
Extinguishing Media:DRY CHEMICAL, CO*2, FOAM
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLODE WHEN EXPOSED TO
    EXTREME HEAT/ELEC EQUIP/SPARKS/OPEN FLAME. KEEP AWAY FROM HEAT &
    OPEN FLAME. PVNT STATIC DISCHARGE. AN INGRED(SUPP DATA)

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. USE
    ABSORBENT CLEAN-UP MATERIALS. AVOID PROLONGED BREATHING OF VAPORS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE EXPLOSION & SPARK-PROOF EQUIPMENT,
    ESP IN CONFINED AREAS, TANKS, STAGNANT CONDITIONS. KEEP CONTAINER
    CLOSED. DO NOT STORE NEAR HEAT/OPEN FLAMES.
Other Precautions:AVOID PROLONGED BREATHING OF VAPORS OR CONTACT
    W/SKIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN CONFINED AREAS USE NIOSH/MSHA APPRVD AIRLINE
    HOOD TYPE RESPIRATOR
Ventilation:MFG RECM DUCT WORK ATTACHED TO EXHST FAN NEAR THE
    APPLICATOR
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES/UNCONFINED AREAS
Other Protective Equipment:USE MASK FOR EYE PROT IN CONFINED AREAS.
    NONSPRK SHOES/TOOLS
Supplemental Safety and Health
BOILING PT FOR MIBK IS 241F. THE BOILING PT IN PHYSICAL DATA IS BASED
    ON AROMATIC SOLV. VAPOR DENSITY: 3.5-3.8. EVAP RATE: MIBK 1.6 &
    AROMATIC 1.1 (BUAC). FLAM LIMITS BASED ON MIBK.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:>231F,>111C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.814 
Evaporation Rate & Reference:0.6-1.9 (BUTYL ACETATE=1)
Appearance and Odor:LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME ARC OR SPARK.
Hazardous Decomposition Products:CO & CO*2

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN SEPARATE CLOSED METAL CONTAINER IN
    ACCORDANCE W/FED., STATE & LOCAL REGULATIONS. COMBUSTIBLE MATERIAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***