===================== Product Identification =====================
MSDS NAME:SOLDER
NIIN:00-188-6986
Status Code:A
MSDS Number: CKTGT
=== Responsible Party ===
Company:VICTORY WHITE METAL CO
Address:6100 ROLAND AVE
City:CLEVELAND
State:OH
ZIP:44127
Country:US
Info Phone Num:216-271-1400
Emergency Phone Num:216-271-1400
CAGE:87687
=== Contractor Identification ===
Company:R & D METALS & CHEMICALS, INC
Address:201C PERIMETER PARK
Box:22533
City:KNOXVILLE
State:TN
ZIP:37922-2233
Country:US
Phone:423-531-6065 / FAX: 423-531-2044
Contract Num:SP0490-98-M-BH59
CAGE:56406
Company:VICTORY WHITE METAL CO
Address:6100 ROLAND AVE
Box:City:CLEVELAND
State:OH
ZIP:44127
Country:US
Phone:216-271-1400
CAGE:87687
============= Composition/Information on Ingredients =============
Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: VARIABLE
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3
ACGIH STEL:4 MG/M3
Name:LEAD
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: VARIABLE
OSHA PEL:0.05 MG/M3
ACGIH TLV:0.15 MG/M3
ACGIH STEL:0.45 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:ANTIMONY (MSDS HAS INVALID CAS # 7440-36-9)
CAS:7440-36-0
RTECS #:CC4025000
< Wt:5.
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG/M3
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:COPPER
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: <1% DUST
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3
ACGIH STEL:2 MG/M3
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:SILVER
CAS:7440-22-4
RTECS #:VW3500000
< Wt:5.
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:ARSENIC
CAS:7440-38-2
RTECS #:CG0525000
< Wt:.02
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.01 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:CADMIUM
CAS:7440-43-9
RTECS #:EU9800000
Fraction by Wt: <.001% DUST
OSHA PEL:SEE 1910.1027
ACGIH TLV:0.05 MG/M3
ACGIH STEL:0.2 MG/M3
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE PROVIDED BY MFR.
Health Hazards Acute and Chronic:UNDER NORMAL HANDLING AND USE,
EXPOSURE TO MASSIVE FORM OF SOLDER PRESENTS FEW HEALTH HAZARDS IN
ITSELF. THERMAL CUTTING AND MELTING OF MATERIAL MAY PRODUCE FUMES
CONTAINING COMPONENT ELEMENTS. BREAT HING THESE FUMES MAY PRESENT
HEALTH HAZARDS. EXPOSURE LEVELS SHOWN WITH INGREDIENTS ARE RELEVANT
TO FUMES AND DUSTS. PRECAUTIONS SHOULD BE TAKEN IF MATERIAL
CONTAMINATED. OVER EXPOSURE TO SOLDER MAY C AUSE IRRITATION OF SKIN
AND MUCOUS MEMBRANES; MAY RESULT IN A BENIGN PNEUMOCONIOSIS. OVER
EXPOSURE TO ANTIMONY MAY CAUSE GI UPSET AND NERVOUS COMPLAINTS SUCH
AS SLEEPLESSNESS, IRRITABILITY AND MUSCULA R PAINS. (CONTD, SEE
TOXICOLOGICAL)
Explanation of Carcinogenicity:ANTMONY TRIOXIDE, ARSEIC AND CADMIUM
HAVE BEEN IDENTIFIED AS POTENTIAL HUMAN CARCINOGENSM
Effects of Overexposure:LEAD POISONING:ABDOMINAL PAIN OR COLIC,
CONSTIPATION, NAUSEA, JOINT AND MUSCLE PAINS, MUSCULAR WEAKNESS.
CNS DISORDERS: SOMNOLENCE, STUPOR, DEATH. ARSENIC POISONING:
NAUSEA, VOMITING, DIARRHEA, LIVER AND KIDNEY DAMAGE. CADMIUM FUMES
OR DUSTS: PAINS, SHORTNESS OF BREATH, LUNG CHANGE, PULONARY EDEMA,
DEATH.
======================= First Aid Measures =======================
First Aid:EYE CONTACT: FLUSH WELL WITH RUNNING WATER TO REMOVE
PARTICULATE. GET MEDICAL ATTENTION. SKIN CONTACT: BRUSH OFF EXCESS
DUST. WASH AREA WELL WITH SOAP AND WATER. INHALATION: REMOVE TO
FRESH AIR, GET M EDICAL ATTENTION. INGESTION: SEEK MEDICAL HELP IF
LARGE QUANTITIES OF MATERIAL HAVE BEEN INGESTED. (INGESTION OF
SIGNIFICANT AMOUNTS OF METAL ARE UNLIKELY).
===================== Fire Fighting Measures =====================
Extinguishing Media:USE SPECIAL MIXTURES OF DRY CHEMICAL. DO NOT USE
WATER OR MOIST SAND.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS AND PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:SOLID MASSIVE FORM OF MATERIAL IS NOT
COMBUSTIBLE UNDER ORDINARY FIRE CONDITIONS. FIRE & EXPLOSION
HAZARDS ARE MODERATE WHEN MATERIAL IS IN THE FORM OF DUST AND
EXPOSED TO HEAT OR FLAMES. HAZARDS EXIS T ALSO WITH CHEMICAL
REACTIONS OR CONTACT6 WITH POWERFUL OXIDIZERS.
================== Accidental Release Measures ==================
Spill Release Procedures:NO SPECIAL PRECAUTION ARE NECESSARY FOR SPILLS
OF BULK MATERIAL. IF LARGE QUANTITIES OF DUST ARE SPILLED, REMOVE
BY VACUUMING OR WET SWEEPING TO PREVENT HEAVY CONCENTRACTION OF
AIRBORNE DUST. CLEAN-UP PERSONNEL SHOULD WEAR RESPIRATORS AND
PROTECTIVE CLOTHING. SCRAP METAL CAN BE RECLAIMED FOR REUSE. FOLLOW
FEDERAL, STATE AND LOCAL REGULATIONS REGARDING DISPOSAL.
Neutralizing Agent:NONE PROVIDED BY MFR.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE MATERIAL AWAY FROM INCOMPATIBLE
MATERIALS, AND KEEP DUST AWAY FROM SOURCES OF IGNITION. FOOD SHOULD
NOT BE CONSUMED IN THE WORK AREA.
Other Precautions:SPECIAL PRECAUTIONS SHOULD BE TAKEN IF SCRAP LEAD IS
CONTAMINATED. USE GOOD HOUSEKEEPING PRACTICES TO PREVENT
ACCUMULATIONS OF DUST AND TO KEEP AIRBORNE DUST CONCENTRATIONS AT A
MINIMUM. AVOID BREATH ING DUST OR FUMES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:EMPLOYEES SHOULD WEAR MSHA OR NIOSH APPROVED
RESPIRATORS FOR PROTECTION AGAINST AIRBORNE DUST. SPECIAL ATTENTION
IS DRAWN TO THE REQUIREMENTS OF OSHA STANDARDS FOR LEAD
(29CFR1910.1025) & ARSEMIC (29C FR1910.1018). STATE OSHA PROGRAMS
WILL HAVE SIMILAR REQUIREMENTS.
Ventilation:USE GENERAL AND LOCAL EXHAUST VENTILATION TO KEEP AIRBORNE
CONCENTRATIONS OF DUST AND FUME BELOW THE TLV.
Protective Gloves:GLOVES AND CREAMS MAY BE NECESSARY TO PREVENT SKIN
SENSITIZATION AND DERMATITIS
Eye Protection:WEAR APPROVED SAFETY GLASSES OR GOGGLES WHEN WORKING
WITH DUSTY MATERIAL.
Other Protective Equipment:SAFETY EYEWASH STATIONS SHOULD BE PROVIDED
IN CLOSE PROXIMITY TO WORK AREA.
Work Hygienic Practices:SHOWERING SHOULD BE REQUIRED BEFORE CHANGING
INTO STREET CLOTHES. FOOD SHOULD NOT BE CONSUMED IN THE WORK AREA.
Supplemental Safety and Health
PRE-EMPLOYMENT AND PERIODIC EVALUATIONS SHOULD BE PROVIDED. ATTENTION
SHOULD BE DIRECTED TOWARD SKIN, EYES, RESPIRATORY TRACT, BLOOD,
KIDNEYS, PULMONARY FUNCTIONS AND NEUROLOGIC HEALTH. CHEST X-RAYS S
HOULD BE INCLUDED IF SYMPTOMS ARE PRESENT.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:=1740.C, 3164.F
B.P. Text:LEAD
Melt/Freeze Pt:=327.C, 620.6F
M.P/F.P Text:LEAD
Vapor Pres:1 MM HG @ 973C (LEAD)
Vapor Density:C/CE. PLEA
Spec Gravity:LEAD- 9.73-11.36
Solubility in Water:LEAD AND TIN : INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL, ODORLESS, VARIOUS SHAPES AND
SIZES.
================= Stability and Reactivity Data =================
MATERIAL MAY BE INCOMPATIBLE WITH ACIDS, BASES AND OXIDIZERS. MOLTEN
MATERIAL MAY REACT VOILENTLY WITH WATER. FOR ADDITIONAL
INFORMATION, USERS SHOULD CONSULT DATA SHEETS ON INDIVIDUAL
COMPONENT ELEMENTS.
Stability Condition to Avoid:MASSIVE MATERIAL IS STABLE AT ORDINARY
TEMPERATURES, BUT DUST PRESENTS MODERATE FIRE AND EXPLOSION
HAZARDS.
Hazardous Decomposition Products:NONE PROVIDED BY MFR.
=================== Toxicological Information ===================
Toxicological Information:(FROM HEALTH HAZARD) INHALATION OF LEAD FUMES
OR DUSTS, OR INGESTION OF LEAD COMPOUNDS, CAN RESULT IN LEAD
POISONING. SEVERE CASES MAY LEAD TO CNS DISORDERS. ARSENIC FUMES
AND DUSTS CAN LEAD TO POISON ING, LIVER AND, KIDNEY DAMAGE, CNS
DISORDERS, DEATH. ARSENIC CAN CAUSE SKIN IRRITATION, ALLERGIC
REACTIONS. CADMIUM FUMES OR DUSTS MAY CAUSE PAINS, LUNG CHANGES,
PULMONARY EDEMA, DEATH. CADMIUM MAY C AUSE LIVER AND KIDNEY DAMAGE.
COPPER FUMES MAY CAUSE METAL FUME FEVER. COPPER MAY CAUSE SKIN AND
HAIR DISCOLORATION. SILVER MAY CAUSE GRAYISH PIGMENTATION OF SKIN,
IRRITATION OF SKIN AND MUCOUS MEMBRA NES.
==================== Disposal Considerations ====================
Waste Disposal Methods:FOLLOW FEDERAL, STATE, AND LOCAL REGULATIONS
REGARDING DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|