=====================  Product Identification  =====================

MSDS NAME:BLACK QUICK DRY MIMEO INK
NIIN:00-780-8180
Status Code:A
MSDS Number: CLBCR
=== Responsible Party ===
Company:U S GOVT PRINTING OFFICE
Address:710 NORTH CAPITAL ST NW
City:WASHINGTON
State:DC
ZIP:20401
Country:US
Info Phone Num:202-275-3341
Emergency Phone Num:0000000000
CAGE:4W874
=== Contractor Identification ===
Company:U S GOVT PRINTING OFFICE
Address:710 NORTH CAPITAL ST NW
Box:City:WASHINGTON
State:DC
ZIP:20401
Country:US
Phone:202-275-3341
CAGE:4W874

=============  Composition/Information on Ingredients  =============

Name:PARAFFIN AND MINERAL OILS
CAS:8012-95-1
RTECS #:PY8030000
= Wt:41.
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
= Wt:8.8
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3

=====================  Hazards Identification  =====================

Health Hazards Acute and Chronic:EYE CONTACT: MAY CAUSE IRRITATION.
    SKIN CONTACT: MAY CAUSE SLIGHT IRRITATION UPON DIRECT CONTACT.
    PROLONGED OR REPEATED EXPOSURE MAY CAUSE DERMATITIS. INHALATION: NO
    KNOWN HAZARDS. INGESTION: LOW TOXI CITY UNLESS ASPIRATION OCCURS.
Medical Cond Aggravated by Exposure:

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: FLUSH WITH WATER FOR 15 MINITUES. SKIN CONTACT:
    REMOVE CONTAMINATED CLOTHING. WASH AREA WITH SOAP AND WATER.
    INHALATION: REMOVE VICTIM TO FRESH AIR. INGESTION: DO NOT INDUCE
    VOMITING. SEE K MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:=93.3C, 200.F
200 F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE BUT CAN BE USED TO
    COOL CONTAINERS EXPOSED TO HEAT OR FLAMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP WITH ABSORBENT MATERIAL. HYDROCARBON
    SOLVENT MAY BE USED TO AID IN CLEANING. REMOVE ALL SOURCES OF
    IGNITION AND PROVIDE ADEQUATE VINTILATION.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN CLOSED CONTAINERS IN A COOL,
    WELL VENTILATED AREA FROM HEAT, OPEN FLAME AND OXIDIZING MATERIALS.
Other Precautions:AVOID SKIN CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE ANTICIPATED TO BE NECESSARY UNDER NORMAL
    WORKING CONDITIONS.
Ventilation:IN ACCORDANCE WITH GOOD ENGINEERING PRACTICES.
Protective Gloves:RECCOMMENDED
Eye Protection:SAFTEY GLASSES OR GOGGLES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Density:+AIR
Evaporation Rate & Reference:BUTYL ACETATE SLOWER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RED OILY LIQUID FAINT PETROLEUM LIKE ODOR
Percent Volatiles by Volume:<1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF SPILLED MATERIAL OR EMPTY COMTAINERS
    IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. THIS
    PRODUCT IS NOT LISTED AS A HAZARDOUS WASTE, NOR DOES IT CONTAIN
    CALIFORNIA LIST COMPOUNDS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***