=====================  Product Identification  =====================

MSDS NAME:1812Y, REFRACTIVE INDEX LIQUID SERIES B ND = 1.657-1.700
Status Code:A
MSDS Number: CLRJD
=== Responsible Party ===
Company:CARGILLE LABORATORIES INC
Address:55 COMMERCE ROAD
City:CEDAR GROVE
State:NJ
ZIP:07009-1289
Country:US
Info Phone Num:973-239-6633
Emergency Phone Num:973-239-6633
CAGE:10684
=== Contractor Identification ===
Company:CARGILLE LABORATORIES INC
Address:55 COMMERCE ROAD
Box:City:CEDAR GROVE
State:NJ
ZIP:07009-1289
Country:US
Phone:973-239-6633
CAGE:10684

=============  Composition/Information on Ingredients  =============

Name:1-IODONAPHTHALENE
Other REC Limits:5 MG/M3

Name:1-BROMONAPHTHALENE
CAS:90-11-9
RTECS #:QJ1545000
Other REC Limits:5 MG/M3
OSHA PEL:N.E.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN AT C.I.U.
Effects of Overexposure:OILY FEEL, IF LIQUID IS MISTED OR ABOVE 150 DEG
    F. (NOT A C. I. U. ) HEATACHES AND NAUSEA POSSIBLE.
Medical Cond Aggravated by Exposure:N. D. F.

=======================  First Aid Measures  =======================

First Aid:INCLUDE POSSIBLE MATERIAL THAT MAY HAVE BEEN MIXED WITH
    LIQUID DURING USE. INHALATION: IF CONCERN ARISES REMOVE TO FRESH
    AIR AND AMINISTER OXYGEN OR ARTIFICIAL RESPIRATION. SKIN AND
    CLOTHES: PROMPT SO AP AND WATER WASH. CALL PHYSICIAN IF SKIN IS
    IRRITATED. EYE: FLUSH WITH WATER, SLIGHT TEMPORARY IRRITATION
    POSSIBLE (CALL PHYSICIAN). INGESTION: DO NOT INDUCE VOMITING. DRINK
    1 TO 2 GLASSES OF WATER O R MILK. CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>92.8C, 199.F
Lower Limits:N.D.F.
Upper Limits:N.D.F.
Extinguishing Media:CARBON DIOXIDE, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY PRODUCE
    HAZARDOUS DECOMPOSITION PRODUCTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB, PLACE IN PLASTIC (POLYETHYLENE OR
    POLYPROPYLENE) CONTAINER, CAP OR TWIST TIE CLOSURE. WASH AREA WITH
    DETERGENT

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BETWEEN 85 DEG F AND 90 DEG F
    (18 C AND 32 DEG C). KEEP FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:AVOID CONTINUAL DIRECT LIGHT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:SEE VENTILATION.
Ventilation:LOCAL: MANDATORY IF A WORKER IS SENSITIVE TO ODOR.
    MECHANICAL (GENERAL): MANDATORY IF A WORKER IS SENSITIVE TO ODOR.
    OTHER: NORMAL ROOM AIR CHANGE/HR (2).
Protective Gloves:SURGICAL TYPE OVER POLYETHYLENE TO INCREASE MANUAL
    DEXTERITY.
Eye Protection:SPLASH GOGGLES.
Other Protective Equipment:CHEMICAL LAB APRON.
Work Hygienic Practices:ALWAYS USE GOOD HYGIENIC WORK/PRACTICES AS TO
    HOUSEKEEPING, PERSONAL HYGIENE. AVOIDANCE OF VAPORS, PROLONGED AND
    REPEATED SKIN CONTACT.
Supplemental Safety and Health
CONDITIONS OF INTENDED & NORMAL USE: (ABBR. C.I.U.) AS AN OPTICAL
    REFRACTIVE INDEX LIQUID AT NORMAL ROOM PRESSURE (760 MMHG),
    TEMPERATURE 65F TO 104F IN A NON MISTED/NON AIRBORN STATE IN A ROOM
    HAVING  AIR CHANGES, (2 /HR., IN A TRAINED & SUPERVISED
    LABORATORY/INDUSTRIAL SETTING USING STANDARD GL/GM PROCEDURES.

==================  Physical/Chemical Properties  ==================

HCC:V5
Boiling Pt:>278.9C, 534.F
B.P. Text:@ 760 MM HG
Melt/Freeze Pt:=3.9C, 39.F
M.P/F.P Text:CA
Vapor Pres:CA 1 MM HG @ 73 DEG F
Vapor Density:CA 1(AIR=1
Spec Gravity:1.40 TO 1.75 (H20=1) 23 C
pH:NOT PROVIDED
Evaporation Rate & Reference:CA 1 (MINERAL OIL = 1)
Solubility in Water:PRACTICALLY INSOLUBLE
Appearance and Odor:YELLOW OILY LIQUID, PUNGENT TO MOTH BALL ODOR
Percent Volatiles by Volume:NOT PROVIDED

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT ABOVE 150 DEG F.
Hazardous Decomposition Products:COMUBSTION WILL PRODUCE CARBON DIOXIDE
    AND PROBABLY CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR

====================  Disposal Considerations  ====================

Waste Disposal Methods:ALL CHEMICAL DISPOSAL MUST BE IN ACCORDANCE WITH
    CURRENT LOCAL, STATE, AND FEDERAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***