=====================  Product Identification  =====================

MSDS NAME:POLYTHIOETHER POLYMER COMPOUND PR-1826 B-1/2
NIIN:01-290-5136
Status Code:A
Kit Part:Y
MSDS Number: CLRXG
=== Responsible Party ===
Company:PRC-DESOTO INTERNATIONAL, INC,  A PPG INDUSTRIES CO
Address:5430 SAN FERNANDO RD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Info Phone Num:818-240-2060 / 800-228-5635
Emergency Phone Num:800-228-5635
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:1LFF4
=== Contractor Identification ===
Company:PRC-DESOTO INTERNATIONAL, INC,  A PPG INDUSTRIES CO
Address:5430 SAN FERNANDO RD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Phone:818-240-2060 / 800-228-5635
CAGE:1LFF4

=============  Composition/Information on Ingredients  =============

Name:NATURAL CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
= Wt:20.
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
< Wt:5.
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3

Name:METHYL ETHYL KETONE
CAS:78-93-3
RTECS #:EL6475000
< Wt:5.
OSHA PEL:590 MG/M3;200 PPM
ACGIH TLV:590 MG/M3;200 PPM
ACGIH STEL:885 MG/M3;300 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EYES: MAY CAUSE BURNING, TEARING AND
    REDDENING. POSSIBLE TRANSIENT CORNEAL CLOUDING. SKIN: PROLONGED
    EXPOSURE MAY CAUSE REDNESS, BURNING, DRYING AND CRACKING OF SKIN.
    INHALATION: MAY CAUSE COUGHING, C HEST PAINS. THROAT IRRITATION.
    MAY CAUSE HEADACHES AND DIZZINESS, MAY BE ANESTHETIC AND MAY CAUSE
    OTHER CENTRAL NERVOUS SYSTEM EFFECTS. REVERSIBLE LIVER DAMAGE IS
    POSSIBLE AT HIGH DOSES. INGESTION: MA Y CAUSE DROWSINESS,
    DIZZINESS, AND NAUSEA.
Medical Cond Aggravated by Exposure:

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH LUKE WARM WATER FOR 15 MINUTES. IF SYMPTOMS
    PERSIST, CONSULT A PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. IF
    SYMPTOMS PERSIST, CONSULT A PHYSICIAN. INHALATION: REMOVE TO FRESH
    AIR, IF  SYMPTOMS PERSIST, CONSULT A PHYSICIAN. INGESTION: CONSULT
    A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=65.6C, 150.F
Lower Limits:1.8%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:USE AIR SUPPLIED RESPIRATOR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCOOP INTO CONTAINERS. CLEAN UP RESIDUE WITH A
    SUITABLE SOLVENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:WASH THOROUGHLY AFTER HANDLING AND
    BEFORE SMOKING OR EATING. AVOID INGESTION.
Other Precautions:EMPTY DRUMS MAY CONTAIN EXPLOSIVE VAPORS. DO NOT 
    CUT, PUNCTURE OR WELD ON OR NEAR DRUM. VAPORS OF THIS PRODUCT ARE
    HEAVIER THAN AIR AND MAY COLLECT IN LOW OR CONFINED AREAS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHEN APPLYING IN ANY CIRCUMSTANCES LIKELY TO
    PRODUCE AIRBORNE LEVEL OF HAZARDOUS INGREDIENTS IN EXCESS OF TLV,
    USE AN ORGANIC VAPOR CARTRIDGE OR AIR-SUPPLIED RESPIRATOR.
Ventilation:GENERAL VENTILATION TO MAINTAIN VAPORS BELOW PEL.
Protective Gloves:SOLVENT  RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:KEEP CONTAINER TIGHTLY CLOSED. DO NOT STORE
    ABOVE 120 DEG F. GROUNDING AND BONDING PROCEDURE SHOULD BE FOLLOWED
    WHEN TRANSPORTING THIS MATERIAL.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:175-175 DEG.F
Vapor Density:HEAVIER
Spec Gravity:1.45
VOC Pounds/Gallon:46
Appearance and Odor:BEIGE THIXOTOPIC PASTE.
Percent Volatiles by Volume:5.5%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:OXIDES OF CARBON, SULFUR DIOXIDE,
    TRACES OF HYDROGEN SULFIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:EPA NO. D-035 HAZARDOUS WASTE. DISPOSE OF IN
    COMPLIANCE WITH FEDERAL AND STATE REGULATIONS.

=====================  Regulatory Information  =====================

State Regulatory Information:

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***