=====================  Product Identification  =====================

MSDS NAME:3M ? SCOTCH-GRIP ? RUBBER AND GASKET ADHESIVE
NIIN:01-033-7507
Status Code:A
MSDS Number: CLRXJ
=== Responsible Party ===
Company:MINNESOTA MINING AND  MFG CO
Address:3M CENTER BLDG 224-5S-04
City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:866-556-5712
Emergency Phone Num:800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:76381
=== Contractor Identification ===
Company:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381

=============  Composition/Information on Ingredients  =============

Name:ACRYLONITRILE-1,3-BUTADIENE POLYMER
CAS:9003-18-3
Minumum % Wt:10.
Maxumum % Wt:20.

Name:SALICYLIC ACID
CAS:69-72-7
RTECS #:VO0525000
Minumum % Wt:1.
Maxumum % Wt:5.

Name:GLYCEROL ESTER OF ROSIN ACIDS
CAS:8050-31-5
Code:F
Minumum % Wt:7.
Maxumum % Wt:13.

Name:ZINC OXIDE (ZNO)
CAS:1314-13-2
RTECS #:ZH4810000
< Wt:2.
OSHA PEL:15 MG/M3

Name:PHENOL-FORMALDEHYDE POLYMER
CAS:9003-35-4
Minumum % Wt:7.
Maxumum % Wt:13.

Name:BENZENAMINE, N-PHENYL-, REACTION PRODUCTS WITH
    2,4,4-TRIMETHYLPENTENE
CAS:68411-46-1
< Wt:1.

Name:ACETONE
CAS:67-64-1
RTECS #:AL3150000
Minumum % Wt:60.
Maxumum % Wt:70.
OSHA PEL:2400 MG/M3;1000 PPM
ACGIH TLV:1780 MG/M3;750 PPM
ACGIH STEL:2380 MG/M3;1000 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EYE CONTACT:CAN INCLUDE  REDNESS,
    SWELLING, PAIN, TEARING,  AND HAZY VISION. SKIN CONTACT: CAN
    INCLUDE REDNESS, SWELLING, AND ITCHING. INHALATION: CAN INCLUDE
    HEADACHE, DIZZINESS, DROWSINESS, INCOORDI NATION, SLOWED REACTION
    TIME, SLURRED SPEECH.INGESTION MAY CAUSE: PAIN, VOMITING, ABDOMINAL
    TENDERNESS, NAUSEA, BLOOD IN VOMITUS, AND BLOOD IN	FECES.
Medical Cond Aggravated by Exposure:

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: FLUSH EYES WITH LARGE AMOUNTS OF WATER.GET
    MEDICAL ATTENTION.SKIN CONTACT: FLUSH SKIN WITH LARGE AMOUNTS OF
    WATER.IF IRRITATION PERSISTS, GET MEDICAL ATTENTION.INHALATION:
    REMOVE PERSON T O FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
    RESPIRATION. IF BREATHING IS DIFFICULT, GET IMMEDIATE MEDICAL
    ATTENTION. IF SWALLOWED: CALL A PHYSICIAN IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Lower Limits:2.6%
Upper Limits:12.8%
Extinguishing Media:CARBON DIOXIDE,  DRY CHEMICAL FOAM.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING, INCLUDING
    HELMET, SELF-CONTAINED POSITIVE PRESSURE OR PRESSURE DEMAND
    BREATHING APPARATUS BUNKER COAT AND PANTS, BANDS AROUND ARMS, WAIST
    AND LEGS, FACE MASK, AND PROTEC TIVE COVERING FOR EXPOSED AREAS OF
    THE HEAD.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO  HEAT FROM
    FIRE MAY BUILD PRESSURE AND EXPLODE. VAPORS MAY TRAVEL LONG
    DISTANCES ALONG THE GROUND OR FLOOR TO AN IGNITION SOURCE AND FLASH
    BACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REFER TO OTHER SECTIONS OF THIS MSDS FOR
    INFORMATION REGARDING PHYSICAL AND HEALTH HAZARDS, RESPIRATORY
    PROTECTION, VENTILATION, AND PERSONAL PROTECTIVE EQUIPMENT.
    VENTILATE AREA. EXTINGUISH ALL IGNIT ION SOURCES. COVER WITH
    ABSORBENT MATERIAL.COLLECT USING  NON-SPARKING TOOLS. PLACE IN A
    U.S. DOT-APPROVED CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
    KEEP OUT OF THE REACH OF CHILDREN.
Other Precautions:FIRE AND EXPLOSION AVOIDANCE: KEEP CONTAINER TIGHTLY
    CLOSED. FLAMMABLE LIQUID AND VAPOR. KEEP AWAY FROM HEAT, SPARKS,
    OPEN FLAME, AND OTHER SOURCES OF IGNITION. GROUND CONTAINERS
    SECURELY WHEN TRANSFE RRING CONTENTS. WEAR LOW STATIC OR PROPERLY
    GROUNDED SHOES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AVOID PROLONGED BREATHING OF VAPORS.SELECT ONE
    OF THE FOLLOWING NIOSH APPROVED RESPIRATORS BASED ON AIRBORNE
    CONCENTRATION OF CONTAMINANTS AND IN ACCORDANCE WITH OSHA
    REGULATIONS: HALF MASK ORGANIC VA POR RESPIRATOR.
Ventilation:USE IN A WELL VENTILATED AREA. PROVIDE SUFFICIENT
    VENTILATION TO MAINTAIN EMISSIONS BELOW RECOMMENDED EXPOSURE
    LIMITS.
Protective Gloves:A PAIR OF GLOVES MADE FROM THE FOLLOWING MATERIAL(S)
    ARE RECOMMENDED: BUTYL RUB
Eye Protection:WEAR VENTED GOGGLES. WEAR SAFETY GLASSES WITH SIDE
    SHIELDS.
Other Protective Equipment:A PAIR OF GLOVES MADE FROM THE FOLLOWING
    MATERIAL(S) ARE RECOMMENDED: BUTYL RUBBER, POLYETHYLENE/ ETHYLENE
    VINYL ALCOHOL, POLYTETRAFLUOROETHYLENE (TEFLON).
Supplemental Safety and Health
FIRE AND EXPLOSION AVOIDANCE: KEEP CONTAINER TIGHTLY CLOSED. FLAMMABLE
    LIQUID AND VAPOR. KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME, AND
    OTHER SOURCES OF IGNITION. GROUND CONTAINERS SECURELY WHEN TRANSFE
    RRING CONTENTS. WEAR LOW STATIC OR PROPERLY GROUNDED SHOES.

==================  Physical/Chemical Properties  ==================

Boiling Pt:=55.6C, 132.F
Vapor Pres:180 MMHG @ 68 F
Vapor Density:2
Spec Gravity:.91 WATER=1
Viscosity:CA. 2750 CENTIPOISE
Evaporation Rate & Reference:1.9 ETHER=1
Solubility in Water:SLIGHT
Appearance and Odor:DARK BROWN LIQUID; SHARP SOLVENT ODOR
Percent Volatiles by Volume:64%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE
    OXIDES OF NITROGEN HYDROGEN CYANIDEALDEHYDES KETONES HYDROCARBONS
    OXIDES OF ZINC.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN A PERMITTED HAZARDOUS WASTE
    INCINERATOR IN THE PRESENCE OF A COMBUSTIBLE MATERIAL.DISPOSE OF
    WASTE PRODUCT IN A FACILITY PERMITTED TO ACCEPT CHEMICAL WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***