=====================  Product Identification  =====================

MSDS NAME:HD-3475(FORMERLY H2-3475)
NIIN:00-717-1751
MSDS Number: BFMDF
=== Responsible Party ===
Company:HYSOL DIVISION DEXTER CORPORATION
Emergency Phone Num:(716) 372-6300
CAGE:KO004
=== Contractor Identification ===
Company:DEXTER CORP THE DEXTER ELECTRONIC MATERIAL DIV
Address:211 FRANKLIN ST.
Box:City:OLEAN
State:NY
ZIP:14760-1297
Country:US
Phone:716-372-6300/6309
CAGE:04347
Company:HYSOL DIVISION DEXTER CORPORATION
CAGE:KO004

=============  Composition/Information on Ingredients  =============

Name:DIETHYLENE TRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: >10%.
OSHA PEL:1 PPM
ACGIH TLV:S, 1 PPM; 9192

=====================  Hazards Identification  =====================

Effects of Overexposure:CAUSES SEVERE EYE & SKIN BURNS

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH IMMEDIATELY W/SOAP & WATER.EYES:IMMEDIATELY FLUSH
    W/WATER AT LEAST 15 MIN. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point:215F OC
Extinguishing Media:WATER SPRAY,DRY CHEMICAL,"ALCOHOL"FOAM,CO*2L
Fire Fighting Procedures:COOL EXPOSED CONTAINERS W/WATER.SEE OTHER
    PRECAUTIONS
Unusual Fire/Explosion Hazard:CARE MUST BE USED TO PREVENT IGNITION
    WHEN PROCESSING OR HANDLING AT TEMPS ABOVE THE FLASH POINT

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL AMOUNTS CAN BE FLUSHED AWAY WITH
    WATER.LARGER SPILLS SHOULD BE SCRAPED UP,TRANSFER TO A METAL
    CONTAINER

======================	Handling and Storage  ======================

Handling and Storage Precautions:PROTECT FROM PHYSICAL DAMAGE.STORE IN
    A COOL,DRY,WELL VENTILATED AREA AWAY FROM ACUTE FIRE HAZARD.STRONG
    SKIN SENSITIZER.AVOID SKIN CONTACT
Other Precautions:WATER SPRAY MAY BE USED DURING FIRE TO FLUSH SPILLS
    AWAY FROM EXPOSURES AND TO DILUTE SPILLS TO NON FLAMMABLE MIXTURES

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION IF
    NECESSARY
Ventilation:DO NOT RECIRCULATE UNLESS SCRUBBED W/ACID.
Protective Gloves:PLASTIC/RUBBER
Eye Protection:GOGGLES IF SPLASH LIKELY
Other Protective Equipment:USE OF PROTECTIVE SKIN CREAM IS RECOMMENDED
Supplemental Safety and Health
VAPOR PRESSURE:<1 MMHG.PERCENT VOLATILE BY VOLUME:NIL.PRODUCT MAY BE
    USED AS HARDENER FOR SEVERAL RESINS TO FORM INSULATING
    MATERIAL.RESINS(BY SAME MFR)R8-2038,C8-4143,R9-2039,C9-4183

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:404F
Vapor Density:3.5
Spec Gravity:1.0
Solubility in Water:COMPLETE
Appearance and Odor:AMBER,MED.VISCOSTY LIQ;STRONG NH*3D LIKE ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION W/STRONG ACIDS
Hazardous Decomposition Products:THERMAL DECOMP-HYDROGEN
    CYANIDE,NITROGEN OXIDES,CO & CO*2
Conditions to Avoid Polymerization:MIXING LGE BATCHS OF RESIN
    W/PRODUCT-DEVELPMNT EXOTHERM HEAT

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL STATE AND FEDERAL
    REGULATIONS.MFR RECOMMENDS SOLIDIFY BEFORE LANDFILL BURIAL.MFR ALSO
    RECOMMENDS THIS IS NOT A HAZARDOUS WASTE UNDER THE RESOURCE
    CONSERVATION AND RECOVER Y ACT

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***