=====================  Product Identification  =====================

MSDS NAME:H2-3475 (HD-3475)
NIIN:00-717-1751
MSDS Number: BFMDG
=== Responsible Party ===
Company:DEXTER HYSOL AEROSPACE INC DIV OF EXTER CORP
Address:2850 WILLOW PASS ROAD
Box:312
City:PITTSBURG
State:CA
ZIP:94565-3237
Country:US
Info Phone Num:510-458-8000
Emergency Phone Num:510-458-8000
CAGE:33564
=== Contractor Identification ===
Company:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564

=============  Composition/Information on Ingredients  =============

Name:DIETHYLENE TRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: >10%
OSHA PEL:1 PPM
ACGIH TLV:S, 1 PPM; 9192

=====================  Hazards Identification  =====================

Effects of Overexposure:CAUSES SEVERE EYE & SKIN BURNS.

=======================  First Aid Measures  =======================

First Aid:IN CASE OF SKIN CONTACT WASH IMMEDIATELY W/SOAP & WATER.IN
    CASE OF EYE CONTACT,FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT LEAST
    15 MINUTES CONSULT A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:215F OC 102C
Extinguishing Media:USE WATER SPRAY,DRY CHEM,"ALCOHOL" FOAM
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOS CONTAINERS
    COOL.WATER SPRAY MAY
Unusual Fire/Explosion Hazard:CARE MUST BE USED TO PRVNT IGNTN WHEN
    PROCESSNG OR HANDLING AT TEMPERATURES ABOVE THE FLASH POINT

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL AMTS CAN BE FLUSHED AWAY W/WATER.LARGER
    SPILLS SHOULD BE SCRAPED UP,TRANSFER TO A METAL CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PROTECT FROM PHYSICAL DAMAGE.STORE IN
    A COOL,DRY AREA,WELL VENTILATED AREA AWAY FROM ANY AREA WHERE FIRE
    HAZARD MAY BE ACUTE.
Other Precautions:IS A STRONG-SKIN SENSITIZER.AVOID SKIN CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHERE COMPARATIVELY SM AMTS ARE BEING
    USED;VENTILAT SHOULD MOVE AIR
Ventilation:LOC EXH-OVER THE WORK & WAY FR WORKER.MECH-DO NOT
    RECIRCULAT
Protective Gloves:PLASTIC OR RBBR
Eye Protection:GOGGL WHERE THERE IS DANG
Other Protective Equipment:USE OF PROTECTIVE SKIN CREAM IS RECOMMENDED
Supplemental Safety and Health
PROCURED UNDER 1310441-01

==================  Physical/Chemical Properties  ==================

HCC:B2
Boiling Pt:B.P. Text:404F 206C
Vapor Pres:<1
Vapor Density:3.5
Spec Gravity:1.0
Solubility in Water:COMPLETELY
Appearance and Odor:AMBER,MEDIUM VISCOSITY LIQUID;STRONG AMMONIA LIKE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH STRONG ACIDS.
Hazardous Decomposition Products:THERMAL DECOMP PRODUCE HYDROGEN
    CYANIDE,NITROGEN OXID,CO&CO*
Conditions to Avoid Polymerization:DO NOT MIX LG BATCH OF EPOXY RESIN &
    DTA W/O RECOGNITION

====================  Disposal Considerations  ====================

Waste Disposal Methods:NEW YORK STATE DOES NOT PERMIT LANDFILL BURIAL
    OF LIQUIDS.SOLIDIFY BY MIXING W/A PORTION OF EPOXY RESIN BEFORE
    LANDFILL BURIAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***