===================== Product Identification =====================
MSDS NAME:PRO-SEAL 775, PART A
NIIN:00-919-6795
Kit Part:Y
MSDS Number: BFWJQ
=== Responsible Party ===
Company:TELEDYNE COAST PRO-SEAL
Emergency Phone Num:213-636-0851
CAGE:85327
=== Contractor Identification ===
Company:ESSEX CHEMICAL CORP PRO-SEAL DIV
Address:19451 SUSANA RD
Box:City:COMPTON
State:CA
ZIP:90221-5713
Country:US
Phone:310-537-7600
CAGE:83527
Company:TELEDYNE COAST PRO-SEAL
CAGE:85327
============= Composition/Information on Ingredients =============
Name:VINYL POLYMER
Fraction by Wt: 6%
Name:NEOPRENE POLYMER
RTECS #:EI9660000
Fraction by Wt: 9%
Name:PLASTICIZER (NONVOLATILE)
Fraction by Wt: 11%
Name:METHYLETHYL KETONE
RTECS #:PM7780000
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:NOSE & THROAT IRRITATION,MILD NARCOSIS.
======================= First Aid Measures =======================
First Aid:REMOVE TO FRESH AIR ATMOSPHERE.
===================== Fire Fighting Measures =====================
Flash Point:240F CC 115C
Lower Limits:1.8
Upper Limits:11.5
Extinguishing Media:CO*2, FOAM,DRY CHEMICAL
Fire Fighting Procedures:FOAM,DRY CHEM, PREFERRED
Unusual Fire/Explosion Hazard:AVOID SPARK, OPEN FLAME EXPOSURE.
================== Accidental Release Measures ==================
Spill Release Procedures:WIPE UP W/RAGS OR SAWDUST
====================== Handling and Storage ======================
Handling and Storage Precautions:BEST STORED AT 80F OR BELOW
Other Precautions:AVOID PROLONGED STORAGE OF OPEN CONTAINERS IN CLOSED
COMPARTMENT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:UNIVERSAL F/PROLONGED EXPOSURE.
Ventilation:LOC EXHAUST-COMFORT ONLY MECH-NO SPARKING ELEMENTS.
Protective Gloves:RUBBER GLOVES
Eye Protection:FOR ACCIDENTAL SPLASH ONL
Other Protective Equipment:AVOID EXTENSIVE BARE HAND CONTACT
Supplemental Safety and Health
PROCURED UNDER PRO-SEAL 775, PT A. AVOID STRONG OXIDIZING ACIDS,
PEROXIDES.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:180F
Spec Gravity:0.85
Appearance and Odor:MEDIUM VISCOSITY SLURRY, KETONE ODOR.
Percent Volatiles by Volume:77%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING ACIDS,PEROXIDES
Stability Condition to Avoid:HIGH TEMPERATURE, STRONG OXIDIZERS.
Conditions to Avoid Polymerization:PEROXIDES
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF RAGS OR SAWDUST BY BURNING.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***