=====================  Product Identification  =====================

MSDS NAME:PORTER 8150 GREEN PRIMER,FORMULA 150,PART B
NIIN:00-922-1154
Kit Part:Y
MSDS Number: BFWLR
=== Responsible Party ===
Company:PORTER PAINT CO
Address:400 S 13TH ST
City:LOUISVILLE
State:KY
ZIP:40203-1714
Country:US
CAGE:50411
=== Contractor Identification ===
Company:COURTAULDS COATINGS INC
Address:400 S 13TH STREET
Box:City:LOUISVILLE
State:KY
ZIP:40203-1714
Country:US
Phone:502-588-9651
CAGE:50411

=============  Composition/Information on Ingredients  =============

Name:EPOSY RESIN
Fraction by Wt: 49.4%

Name:MAGNESIUM SILICATE
Fraction by Wt: 9.87%

Name:NAPHTA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 25.5%
OSHA PEL:100 PPM

Name:DIATOMACEOUS SILICA
RTECS #:VV7320000
Fraction by Wt: 14.8%

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN IRRITATION, NAUSEA, HEADACHE, EYE
    IRRITATION.

=======================  First Aid Measures  =======================

First Aid:REMOVE TO FRESH AIR EYE: FLUSH COPIOUSLY WITH WATER. SKIN:
    REMOVE CONTAMINATED CLOTHING, WASH AFFECTED AREAS WITH SOAP &
    WATER. REFER TO PHYSICIAN. SYMPTOMS GENERALLY DISAPPEAR WHEN
    EXPOSURE CEASES.

=====================  Fire Fighting Measures  =====================

Flash Point:115 PMCC
Lower Limits:1.0
Upper Limits:11.2
Extinguishing Media:FOAM, CO*2 CRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BRTHNG EQUIP
Unusual Fire/Explosion Hazard:IN ABSENCE OF ELECTRICITY, USE WATER
    SPRAY TO REDUCE BURNING RATE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EXHAUST VAPOR. ELIMINATE ALL SOURCES OF
    IGNITION. ABSORB SPILLAGE WITH DRY CLAY, SAWDUST, RAGS OR OTHER
    SUITABLE MATERIAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:SECURE CLOSURES. STORE IN COOL, DRY,
    WELL VENTILATED AREA. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:DO NOT TAKE INTERNALLY. CLEAN HANDS THOROUGHLY AFTER
    USING, BEFORE EATING OR SMOKING AVOID PROLONGED BREATHING OF VAPOR
    OR SPRAY MIST. CLOSE CONTAINER AFTER USING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESPIRATOR, CONTINUOUS-FLOW AIRLINE IN CONFINED
    SPACE.
Ventilation:ADEQUATE EXHAUST FROM BOTTOM
Protective Gloves:CLOTH/NEOPRENE
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:PROTECTIVE CAP & COVERALLS, BARRIER CREAM ON
    EXPOSED SKIN.
Supplemental Safety and Health
THS IS PART B OF A TWO PART PRODUCT. IT IS THE EPOXY COMPONENT. PRODUCT
    ALSO CONTAINS APPROX 0.5% THIXOTROPE.KEY1:J1.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:311F
Vapor Pres:1
Vapor Density:4.3
Spec Gravity:1.19
Evaporation Rate & Reference:<1 BUTYL ACETATE
Solubility in Water:NEGLIBLE
Appearance and Odor:GRN PAQUE MOD THIN LIQ. MLD ALC-ARMTC HYDCBN ODOR
Percent Volatiles by Volume:34.8

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAME
Hazardous Decomposition Products:CO, CO*2

====================  Disposal Considerations  ====================

Waste Disposal Methods:AVOID INCINERATION OF CLOSED CONTAINERS &
    CONDITIONS THAT PERMIT SPONTANEOUS COMBUSTION. DISPOSE OF IN
    ACCORDANCE WITH LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***