===================== Product Identification =====================
MSDS NAME:COPPER LEADTEX SHEET
NIIN:00F003998
MSDS Number: BBPGS
=== Responsible Party ===
Company:A.M. CASTLE/FRANKLIN PARK, IL 60131
Emergency Phone Num:(312) 455-7111
CAGE:11045
=== Contractor Identification ===
Company:CASTLE A M AND CO
Address:3400 N WOLF RD
Box:City:FRANKLIN PARK
State:IL
ZIP:60131-1319
Country:US
Phone:847-455-7111
CAGE:11045
============= Composition/Information on Ingredients =============
Name:LEAD (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:COPPER (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 99.9%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:SHORT TERM EXPOSURE TO FUMES/DUST MAY PRODUCE
IRRITATION OF EYES AND RESPIRATORY SYSTEM.
======================= First Aid Measures =======================
First Aid:IF EXPOSED TO EXCESSIVE LEVELS OF METAL FUMES, REMOVE TO
FRESH AIR, SEEK MEDICAL AID IMMEDIATELY. EYES: FLUSH WITH WATER FOR
AT LEAST 15 MINUTES.
===================== Fire Fighting Measures =====================
Lower Limits:N/K'
Fire Fighting Procedures:PRODUCTS IN THE SOLID STATE PRESENT NO FIRE OR
EXPLOSION.
Unusual Fire/Explosion Hazard:DUST DISPERSION IN AIR AND STRONG
IGNITION SOURCE MAY RESULT IN AN EXPLOSION.
================== Accidental Release Measures ==================
Spill Release Procedures:ARC OR SPARK GENERATED WHEN WELDING OR BURNING
COULD BE A SOURCE OF IGNITION FOR COMSTABLE AND FLAMMABLE
MATERIALS.
====================== Handling and Storage ======================
Handling and Storage Precautions:IN WELDING, PRECAUTIONS SHOULD BE
TAKEN FOR AIRBORNE CONTAMINANTS WHICH MAY ORIGINATE FROM COMNENTS
OF THE WELDING ROD.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA-APPROVED DUST/FUME, RESP SHOULD BE
USED WHEN EXCEED TLV'S
Ventilation:LOCAL EXHAUST VENTILATION SHOULD BE UTILIZED WHEN SAWING
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:SHOULD BE UTILIZED AS REQUIRED BY THE
WELDING STANDARDS.
Supplemental Safety and Health
MSDS DATED: 25 NOV 1985. MELTING POINT: >1800. ALSO CONTAINS: TRACE
LESS THAN .1% PHOSPHORUS, ANTIMONY, SELENIUM BISMUTH.
================== Physical/Chemical Properties ==================
Spec Gravity:>8
Appearance and Odor:COPPER METALLIC, ODORLESS
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
MERCURY, AMMONIA, ACETYLENE, ACIDS
Stability Condition to Avoid:EXPOSURE DURING STORAGE TO STRONG
ACIDS/BASES/OXIDIZING AGTS
Hazardous Decomposition Products:TOXIC GASES/AEROSOLS/VAPORS MAY BE
RELEASED IN A FIRE
==================== Disposal Considerations ====================
Waste Disposal Methods:ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|