=====================  Product Identification  =====================

MSDS NAME:KRYLON 2501 LEATHER BROWN
NIIN:01-015-7337
MSDS Number: BGDNP
=== Responsible Party ===
Company:BORDEN INC., KRYLON DEPT.
Address:180 E BROAD ST
City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
CAGE:EO688
=== Contractor Identification ===
Company:BORDEN CHEMICAL CO
Address:180 E BROAD ST
Box:City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Phone:614-225-6124
CAGE:86142
Company:BORDEN INC., KRYLON DEPT
Address:FORD & WASHINGTON ST
City:NORRISTOWN
State:PA
ZIP:19404
Country:US
Phone:(215) 278-2456
CAGE:EO688

=============  Composition/Information on Ingredients  =============

Name:N-BUTYL ALCOHOL  (SARA III)
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 0.2-2.5%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 8-17%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 6-14%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 2-3%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ACETONE  (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 36.5%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:INH:MAY BE HARMFUL;LIQ/VAP MAY IRRIT
    NOSE,THROAT,LUNGS. SKIN/EYES:IRRIT. INGEST:MAY BE HARMFUL

=======================  First Aid Measures  =======================

First Aid:INGEST:DO NOT INDUCE VOMITING;CALL PHYSICIAN IMMED.
    SKIN:IMMED FLUSH W/WATER FOR AT LEAST 15MIN;IF IRRIT PERSISTS,CALL
    A PHYSICIAN. EYES:IMMED FLUSH W/WATER 15 MIN W/EYELIDS APART;CALL
    MD. INH:REMOVE  TO FRESH AIR;GIVE ARTIF RESP OR 0*2 IF NEC;CALL MD

=====================  Fire Fighting Measures  =====================

Flash Point:N/A AEROSOL
Extinguishing Media:DRY CHEMICAL,CO*2,FOAM. WATER MAY BE INEFFECTIVE
Fire Fighting Procedures:USE WATER TO COOL FIRE EXPOS CANS. WEAR SCBA
Unusual Fire/Explosion Hazard:EXTREM FLAM;UNDER PRESSURE. HI TEMP MAY
    BURST CANS;AVOID ALL HEAT/IGNIT SOURCES,DIRECT SUN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP
    W/ABSORBENT MATERIAL & REMOVE TO A CHEMICAL DISPOSAL AREA. PREVENT
    ENTRY INTO NATURAL BODIES OF WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES OVER
    120F. WASH THOROUGHLY AFTER HANDLING. AVOID PROLONGED OR REPEATED
    CONTACT W/EYES,SKIN OR CLOTHING#
Other Precautions:USE W/ADEQUATE VENTILATION. AVOID BREATHING VAPOR OR
    MIST. HANDLE IAW GOOD INDUSTRIAL HYGEINE & SAFETY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD RESP PROT DEPENDING ON
    CONDITIONS OF USE/TLV EXPOS
Ventilation:LOCAL EXHAUST IN VOLUME & PATTERN ADEQ TO KEEP BELOW TLV
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES IF CONTACT LIKELY
Supplemental Safety and Health
DATE OF PREP:06/30/86. ADD INGRED: METHYL ISOBUTYL KETONE,2-4%;
    2-PROPANOL 1-METHOXY-,ACETATE,7-8%; PROPANE,16-17%.

==================  Physical/Chemical Properties  ==================

HCC:V3
Vapor Density:>1.0
Spec Gravity: