=====================  Product Identification  =====================

MSDS NAME:DSL-32,DSL-68,DSL-100,DSL-125 LUBRCATNG OIL
NIIN:01-068-0676
MSDS Number: BGKFC
=== Responsible Party ===
Company:SUMMIT OIL CO.,INC.
Address:2440 EAST FIFTH STREET SUITE 120
City:TYLER
State:TX
ZIP:75701
Country:US
Emergency Phone Num:(214)593-6893
CAGE:MO814
=== Contractor Identification ===
Company:SUMMIT OIL CO
Address:9010 CR 2120
Box:City:TYLER
State:TX
ZIP:75707
Country:US
Phone:903-534-8021
CAGE:48922
Company:SUMMIT OIL CO.,INC.
Address:2440 EAST FIFTH STREET SUITE 120
Box:City:TYLER
State:TX
ZIP:75701
Country:US
CAGE:MO814

=============  Composition/Information on Ingredients  =============

Name:PHTHALATE ESTER

Name:NO HAZARDOUS COMPONENTS PER MANUFACTURER

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES/SKIN/RESPIRATORY
    SYSTEM:BELIEVED TO BE MINIMALLY IRRITATING; CHRONIC:NOT DETERMINED.
Effects of Overexposure:LOW ORAL & DERMAL TOXICITY. PROLONGED OR
    REPEATED EXPOSURE MAY CAUSE IRRITATION,NAUSEA, & VOMITING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED.

=======================  First Aid Measures  =======================

Eyes:FLUSH WITH WATER FOR 15 MINUTES.CALL A PHYSICIAN IF
    IRRITATION DEVELOPS;SKIN:WASH WITH SOAP & WATER;INHALATION:REMOVE
    TO FRESH AIR.GIVE CPR OR OXYGEN IF NECESSARY;INGESTION:INDUCE
    VOMITING IF CON SCIOUS.CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>450F,>232C
Extinguishing Media:WATER SPRAY,DRY CHEMICAL,FOAM,CO*2
Fire Fighting Procedures:BURNING WILL PRODUCE TOXIC FUMES. WEAR SCBA &
    FULL TURN OUT GEAR TO FIGHT FIRE. AVOID SPREADING LIQUID & FIRE BY
    WATER FLOODING.
Unusual Fire/Explosion Hazard:EXPOSURE TO HEAT BUILDS UP PRESSURE IN
    CLOSED CONTAINERS. COOL WITH WATER SPRAY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB ON INERT MATERIAL. SHOVEL UP & PLACE IN
    APPROPRIATE DISPOSAL CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
    PLACE. KEEP CONTAINERS CLOSED.
Other Precautions:AVOID CONTACT WITH SKIN & EYES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF OVERHEATED,USE APPROVED RESPIRATORY
    PROTECTIVE EQUIPMENT.
Ventilation:LOCAL EXHAUST & MECHANICAL RECOMMENDED.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:EYE WASH & SAFETY SHOWER
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING MATERIAL
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:<0.035
Spec Gravity:<1.0
Appearance and Odor:AMBER WITH MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:OPEN FLAMES
Hazardous Decomposition Products:BURNING WILL PRODUCE TOXIC FUMES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISSOLVE WASTE IN A SOLVENT & DISPOSE BY
    SUPERVISED INCINERATION IAW FEDERAL,STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***