=====================  Product Identification  =====================

MSDS NAME:VALIANT PHD
NIIN:01-084-8927
MSDS Number: BGLBD
=== Responsible Party ===
Company:CAULK/DENSPLY CO.
Emergency Phone Num:800-441-8448
CAGE:MO865
=== Contractor Identification ===
Company:CAULK/DENSPLY CO.
CAGE:MO865
Company:CAULK/DENTSPLY
Address:38 W CLARKE AVE
Box:359
City:MILFORD
State:DE
ZIP:19963-0359
Country:US
Phone:302-422-4511/ 703-451-1900
CAGE:11107

=============  Composition/Information on Ingredients  =============

Name:SILVER  (SARA III)
CAS:7440-22-4
RTECS #:VW3500000
Fraction by Wt: 52.5%
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 17.5%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 29.7%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9192

Name:PALLADIUM (CAS #7440-05-3)
Fraction by Wt: 0.3%

=====================  Hazards Identification  =====================

Effects of Overexposure:LOCAL/GEN PIGMENTATION FM SLVER EXPOS. FM CU
    FUME:IRRIT RESP TRACT & METAL FUME FEVER . EYE/SKIN IRR

=======================  First Aid Measures  =======================

First Aid:EYE:IMMED FLUSH EYE W/LG AMT OF WATER FOR 15 MINUTES. GET MED
    ATTN. SKIN: WASH W/SOAP & WATER. INHAL:NOT EXPECTED TO BE A
    PROBLEM.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:NONE
Extinguishing Media:SUITABLE FOR SURROUNDING FIRE
Fire Fighting Procedures:WEAR SCBA & PROTECT CLTHNG.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:PICK UP POWDER SPILLS BY VACUUM OR WET
    MOPPING.PREVENT DUSTY CONDITIONS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE GOOD INDUST HYGIENE. USE LOCAL
    VENT WHEN GENERATING AIRBORNE EXPOSURE SUCH AS WELDING. MELTING,
    GRINDING, ETC.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATORS ARE REQ IF DUST/FUMES
    EXCEED TLV'S.
Ventilation:NONE SPECIFIED BY MFG. LOCAL IF GRINDING ETC.
Protective Gloves:NONE
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS NOT DATED.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Pres:0
Spec Gravity:9.6
Solubility in Water:NGELIGIBLE
Appearance and Odor:METALLIC GRAY POWDER
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZERS
Stability Condition to Avoid:NONE SPECIFIED BY MFR.
Hazardous Decomposition Products:NONE SPECIFIED BY MFR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF WASTE I/A/W LOCAL, STATE OR FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***