=====================  Product Identification  =====================

MSDS NAME:TYPE 361A-20R SOLDER
NIIN:01-084-0982
MSDS Number: BGKZC
=== Responsible Party ===
Company:MEASUREMENTS GROUP
Emergency Phone Num:919-365-3800
CAGE:88952
=== Contractor Identification ===
Company:MEASUREMENTS GROUP INC
Address:9517 US 64 HWY
Box:City:WENDELL
State:NC
ZIP:27591
Country:US
Phone:919-365-3800
CAGE:88952

=============  Composition/Information on Ingredients  =============

Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 63%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9192

Name:LEAD  (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 36.6%
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:ANTIMONY  (SARA III)
CAS:7440-36-0
RTECS #:CC4025000
Fraction by Wt: 0.35%
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG SB/M3; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ROSIN (CORE FLUX)
Fraction by Wt: 3.4%

Name:ALIPHATIC ALCOHOL
Fraction by Wt: 0.18%

=====================  Hazards Identification  =====================

Effects of Overexposure:FLUX: CAN CAUSE IRRITATION OF SKIN & MUCOUS
    MEMBRANE.

=======================  First Aid Measures  =======================

First Aid:REMOVE VICTIM FROM CONTAMINATED AREA & KEEP EWARM & QUIET IN
    FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point:261F,127C COC
Extinguishing Media:FLUX:CO*2,DRY CHEMICAL
Unusual Fire/Explosion Hazard:IN A FIRE MATERIAL COULD EMIT TOXIC &
    CORROSIVE FUMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUX MAY BE WIPED FROM A SURFACE WITH
    ISOPROPYL ALCOHOL & A SPONGE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE WITH ADEQUATE LOCAL
    VENTILATION,STORE BELOW 100F,38C.

=============  Exposure Controls/Personal Protection  =============

Ventilation:LOCAL EXHAUST
Supplemental Safety and Health
ADDTNL INGRED:10017650H ORGANIC HALIDE 0.04%. FL PT IS FOR FLUX.
    MELTING PT:361F,183C. DIMENSIONS:0.063 INCHES DIAMETER; 1 LB.
    SPOOL. FED SPEC:QQ-S-571E.

==================  Physical/Chemical Properties  ==================

HCC:N1
Appearance and Odor:ALLOY:DULL SILVER. FLUX:AMBER. WIRE W/ROSIN CORE.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:MAY EVOLVE ACIDS,HALOGENS,AMINES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***