=====================  Product Identification  =====================

MSDS NAME:LUBE OIL,AIRCRAFT.
NIIN:00D000029
MSDS Number: BBCCP
=== Responsible Party ===
Company:AMERICAN OIL & SUPPLY CO.
Emergency Phone Num:201-589-0250
CAGE:DO810
=== Contractor Identification ===
Company:AMERICAN OIL & SUPPLY CO
Address:233 WILSON AVE
City:NEWARK
State:NJ
ZIP:07105
Country:US
Phone:201-589-0250
CAGE:DO810
Company:AMERICAN OIL AND SUPPLY CO
Address:239 WILSON AVE
City:NEWARK
State:NJ
ZIP:07105-3824
Country:US
Phone:201-589-0250
CAGE:92895

=============  Composition/Information on Ingredients  =============

Name:INERT INGREDIENTS
Fraction by Wt: 100%.
ACGIH TLV:UNKNOWN.

=====================  Hazards Identification  =====================

Effects of Overexposure:NONE FROM INHAL OF VAPORS.INHAL OF MISTS,SPRAYS
    OR HIGH VAPOR CONCS MAY RESULT IN IRRITATE

=======================  First Aid Measures  =======================

First Aid:INGEST:INDUCE VOMIT. EYES:FLUSH WITH WATER FOR 15 MIN. DO NOT
    NEUTRALIZE OR USE OILS OR OINTMENTS. SKIN:FLUSH AFFECTED AREAS WITH
    WATER.INHAL: REMOVE FROM CONTAMINATED ATMOSPHERE. IN ALL
    CASES,CONSULT  DR.

=====================  Fire Fighting Measures  =====================

Flash Point:490F COC.
Lower Limits:UNK.
Upper Limits:UNK.
Extinguishing Media:WATER FOG,DRY CHEM.OR CO*2.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:NO SPECIAL HAZARDS ARE INVOLVED IN
    HANDLING.NORMAL CLEAN UP PROCEDURE FOR LARGE AMTS OF NON-VOLATILE
    LIQUID SHOULD BE FOLLOWED.RESIDUALS CAN BE ABSORBED W/CLAY-TYPE
    ABSORBENT.FOLLOW PROPER DISPOSAL TE CHNIQUE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PROLONGED & REPEATED CONTACT WITH SKIN
    SHOULD BE AVOIDED.WASH WITH SOAP & WATER & LAUNDER SOILED CLOTHING
    BEFORE REUSE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY NEEDED
Ventilation:LOCAL EXHAUST IS RECOMMENDED
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:>450F.
Vapor Pres:<1
Vapor Density:>1.0
Spec Gravity:0.988.
Evaporation Rate & Reference:>10.
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:CLEAR,RED MOBILE LIQUID,MILD ODOR.
Percent Volatiles by Volume:0.0.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AQUEOUS ALKALI WILL SLOWLY SAPONIFY
Hazardous Decomposition Products:NORMAL FOR ORGANIC
    MATERIALS,I.G.CO*2,C,H*2O,CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATION UNDER APPROVED CONTROLLED
    PROCEDURES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***