=====================  Product Identification  =====================

MSDS NAME:STATIONARY DISK, #5007489-1
NIIN:00F005362
MSDS Number: BBSHZ
=== Responsible Party ===
Company:GOODYEAR AEROSPACE CORP/AKRON, OH 44315
Emergency Phone Num:(216) 796-2121
CAGE:EO533
=== Contractor Identification ===
Company:GOODYEAR AEROSPACE CORPORATION
Address:1210 MASSILLON ROAD
City:AKRON
State:OH
ZIP:44315
Phone:(216) 796-2121
CAGE:EO533
Company:LORAL CORP DEFENSE SYSTEMS DIV-AKRON
Address:1210 MASSILLON RD
Box:City:AKRON
State:OH
ZIP:44315-0001
Country:US
Phone:216-796-2800
CAGE:25500

=============  Composition/Information on Ingredients  =============

Name:GRAPHITE, SYNTHETIC
CAS:7440-44-0
RTECS #:FF5250100
Fraction by Wt: 40%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: 35%
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192

Name:PHENOL-FORMALDEHYDE RESIN
Fraction by Wt: <5%

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION: EXPOSURES TO AIRBORNE CONCENTRATION
    MAY CAUSE EYE IRRIT, UPPER RESP SYSTEM OR SKIN.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. EYECONTACT: FLUSH EYES WITH
    WATER. IF IRRITATION PERSISTS, SEE A PHYSICIAN.SKIN CONTACT: WASH
    WITH SOAP AND WATER.

=====================  Fire Fighting Measures  =====================

Unusual Fire/Explosion Hazard:INCINERATION CAN GENERATE AIRBORNE FIBERS
    WHICH MAY CAUSE ELECTRICAL MALFUNCTIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IF DUST HAS BEEN SPILLED, ISOLATE AND WET
    USING FINE MIST IF POSSIBLE. SWEEP MATERIAINTO AN AIR-TIGHT BAR OR
    CONTAINER. WASH CONTAMINATED CLOTHING SEPARATEL

======================	Handling and Storage  ======================

Handling and Storage Precautions:CHEMICALS SHOULD BE HANDLED TO PREVENT
    EYE CONTACT & EXCESSIVE SKIN CONTACT. APPROPRIATE EYE &KIN
    PROTECTION SHOULD BE EMPLOYED .
Other Precautions:HANDLE TO MINIMIZE FORMATION OF DUST. ALL ELECTRICAL
    EQUIPMENT IN AREA WHERE DUST MAY BE GENERATED SHOULD BE SEALED TO
    PREVE INVASION BY CONDUCTIVE CARBONS FIBERS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR, NIOSH/MSHA-APPROVED RESPIRATOR FOR DUST.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP