=====================  Product Identification  =====================

MSDS NAME:CONTECH BRAND WALL BOARD ADHESIVE PL185
NIIN:00F005366
MSDS Number: BBSJD
=== Responsible Party ===
Company:CONTECH INC/MINNEAPOLIS, MI 55435
Emergency Phone Num:(612) 835-3434
CAGE:FO057
=== Contractor Identification ===
Company:CONTECH INC/MINNEAPOLIS, MI 55435
CAGE:FO057

=============  Composition/Information on Ingredients  =============

Name:NAPHTA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 33%
OSHA PEL:100 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION OF HIGH CONCENTRATIONS MAY LEAD TO
    ASPHYXIATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: MOVE TO FRESH AIR & APPLY ARTIFICIAL RESPIRATION
    IF NECESSARY. SKIN CONTACT: WASH WITH SOAP & WATER. EYE CONTACT:
    WASH WITH WATER FOR AT LEAST 15 MINUTES; IF IRRITATION PERSISTS,
    GET MEDIC AL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:<20F (TOC)
Lower Limits:1%
Upper Limits:7.5%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG
Fire Fighting Procedures:TREAT AS SOLVENT FIRE
Unusual Fire/Explosion Hazard:VAPOR MAY IGNITE EXPLOSIVELY

==================  Accidental Release Measures  ==================

Spill Release Procedures:EXTINGUISH ALL SOURCES OF COMBUSTION IN THE
    AREA. CLEAN UP SPILLS AS SOON AS POSSIBL SCOOP MATERIAL INTO METAL
    CONTAINERS AND REMOVE TO A SAFE PLACE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OPEN
    FLAME, OR OTHER SOURCES OF COMBUSTION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:PROPER VENTILATION IS SUFFICIENT.
Ventilation:LOCAL EXHAUST
Protective Gloves:NOT REQUIRED
Eye Protection:NOT REQUIRED
Other Protective Equipment:FORCED CROSS-VENT TO PREVENT BUILD-UP OF
    EXPLOSIVE VAPORS.
Supplemental Safety and Health
MSDS UNDATED

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:170F
Vapor Pres:100
Vapor Density:2.9
Spec Gravity:1.14
Evaporation Rate & Reference:NONE
Solubility in Water:INSOLUBLE
Percent Volatiles by Volume:53%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS.
Hazardous Decomposition Products:COMBUSTION FORMS BLACK SMOKE, CO2,
    WATER AND CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ALLOW MATERIAL TO DRY BY EVAPORATION AND DISPOSE
    OF IN LANDFILL OR BY INCINERATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***