=====================  Product Identification  =====================

MSDS NAME:RX NOVAREX, CROWN CAST, VITEX PDA 2000
NIIN:00F011120
MSDS Number: BJBFG
=== Responsible Party ===
Company:JENERIC INDUSTRIES, INC.
Address:125 NORTH PLAINS INDUSTRIAL ROAD
Box:724
City:WALLINGFORD
State:CT
ZIP:06492
Info Phone Num:(203) 265-7397
Emergency Phone Num:(203) 265-7397
CAGE:58796
=== Contractor Identification ===
Company:JENERIC INDUSTRIES INC
Address:53 NORTH PLAINS INDUSTRIAL RD
Box:City:WALLINGFORD
State:CT
ZIP:06492-5841
Phone:(203) 265-7397
CAGE:58796

=============  Composition/Information on Ingredients  =============

Name:CHROMIUM  (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 25-30%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:COBALT  (SARA III)
CAS:7440-48-4
RTECS #:GF8750000
Fraction by Wt: 55-64%
Other REC Limits:0.05 PPM
OSHA PEL:0.1 MG/M3;AS CO
ACGIH TLV:0.05 MG/M3;DUST 9293

Name:RUTHENIUM
CAS:7740-18-8
Fraction by Wt: 0-5%

Name:ALUMINUM  (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 0-3%
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192

Name:TUNGSTEN
CAS:7440-33-7
RTECS #:YO7175000
Fraction by Wt: 0-10%
OSHA PEL:5 MG/M3/ 10 STEL
ACGIH TLV:5 MG/M3/10 STEL;9192

Name:COLUMBIUM, NIOBIUM
CAS:7440-03-1
Fraction by Wt: 0-2%
Other REC Limits:5 MG/CUM

Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 0-6%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293

Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 0-4%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:YTTRIUM
CAS:7440-65-5
Fraction by Wt: <1%
OSHA PEL:1 MG/CUM
ACGIH TLV:1 MG/CUM

Name:ZIRCONIUM
CAS:7440-67-7
RTECS #:ZH7070000
Fraction by Wt: <1%
OSHA PEL:5 MG/M3/10 STEL
ACGIH TLV:5 MG/M3/10 STEL;9192

Name:MANGANESE  (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: <1%
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DUST MAY CAUSE RESPIRATORY
    TRACT IRRITATION, PULMONARY HYPERSENSITIVITY, & FREE SILICA AT HIGH
    LEVELS OVER MANY YEARS MAY CAUSE SILICOSIS. SKIN: DUST MAY CAUSE
    DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DUST MAY CAUSE RESPIRATORY TRACT
    IRRITATION, PULMONARY HYPERSENSITIVITY, & FREE SILICA AT HIGH
    LEVELS OVER MANY YEARS MAY CAUSE SILICOSIS. SKIN: DUST MAY CAUSE
    DERMATITIS.
Medical Cond Aggravated by Exposure:DERMATITIS

=======================  First Aid Measures  =======================

Eyes: FLUSH THOROUGHLY W/RUNNING WATER. SKIN: FLUSH & SCRUB
    THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE PERSON TO FRESH AIR,
    ASSIST BREATHING WITH ADDITIONAL OXYGEN IF NECESSARY. CONTACT
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Unusual Fire/Explosion Hazard:THE ALLOYS ARE FIRE & EXPLOSION
    RESISTANT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE DUST BY VACUUMING OR WET SWEEPING TO
    PREVENT POWDERING IN THE AIR. USE CONTAINERIZED DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT W/SKIN. GRIND, POLISH, &
    MELT THIS ALLOY ONLY IN THE PRESENCE OF ADEQUATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROVED RESPIRATORS.
Ventilation:MECHANICAL/LOCAL EXHAUST VENTILATION FILTRATION SHOULD BE
    EMPLOYED.
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING
Supplemental Safety and Health
EACH INGOT WEIGHT: 5-8 GMS. (APPROX).

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text: 2438-2488F
Spec Gravity: 8.32
Solubility in Water:INSOLUBLE
Appearance and Odor:PLATINUM COLOR, NO ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:FUMES

====================  Disposal Considerations  ====================

Waste Disposal Methods:NO SPECIAL PRECAUTIONS ARE REQUIRED FOR BULK
    (SOLID) SHAPES, SUCH AS INGOTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***