=====================  Product Identification  =====================

MSDS NAME:UNIVERSAL HARDENER
NIIN:00F011107
MSDS Number: BJBDR
=== Responsible Party ===
Company:UNITEK CORPORATION
Address:2724 SOUTH PECK ROAD
City:MONROVIA
State:CA
ZIP:91010
Info Phone Num:(818) 574-4000
Emergency Phone Num:(818) 574-4000
CAGE:90444
=== Contractor Identification ===
Company:UNITEK CORPORATION
Address:2724 S PECK RD
Box:City:MONROVIA
State:CA
ZIP:91016-5005
Phone:(213) 445-7960
CAGE:90444

=============  Composition/Information on Ingredients  =============

Name:DIBUTYLTIN DILAURATE
CAS:77-58-7
RTECS #:WH7000000
Other REC Limits:0.1 MG/CUM (SN)
OSHA PEL:0.1 MG/CUM (SN)
ACGIH TLV:0.1 MG/CUM, SN(SKIN)

Name:DIBUTYLTIN DIHYDROXIDE
OSHA PEL:0.1 (AS TIN)
ACGIH TLV:0.1 (AS TIN)

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATION. SKIN: DERMATITIS.
    INHALATION: RESPIRATORY IRRITATION, SORE THROAT, & COUGHING.
    INGESTION: HEADACHE, NAUSEA, VOMITING, & DAMAGE TO THE NERVOUS
    SYSTEM, LIVER & BILE DUCTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: PROLONGED OR REPEATED CONTACT MAY RESULT
    IN DERMATITIS. INHALATION: RESPIRATORY IRRITATION, SORE THROAT, &
    COUGHING. INGESTION: HEADACHE, NAUSEA, VOMITING & DAMAGE TO THE
    NERVOUS SYSTEM, LIVER,  & BILE DUCTS.
Medical Cond Aggravated by Exposure:DERMATITIS

=======================  First Aid Measures  =======================

First Aid:EYE/SKIN: WASH W/LARGE AMOUNTS OF WATER, SOAP ORMILD
    DETERGENT. INGESTION: GIVE THE PERSON LARGE QUANTITIES OF WATER,
    THEN INDUCE VOMITING. SEEK MED ATT. INHALATION: IF PERSON HAS
    BREATHED IN LARGE AM OUNTS, MOVE TO FRESH AIR AT ONCE. IF BREATHING
    HAS STOPPED, PERFORM ARTIFICIAL RESPIRATION.

=====================  Fire Fighting Measures  =====================

Flash Point:36C
Extinguishing Media:DRY CHEMICAL, FOAM, CO2

==================  Accidental Release Measures  ==================

Spill Release Procedures:COVER W/INSERT ABSORBENT SOLID SUCH AS SAND OR
    VERMICULITE. CLEAN SMALL QUANTITIES WITH ACETONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH OR MSHA APPROVED RESPIRATOR W/ORGANIC
    VAPOR CARTRIDGE, DUST & MIST FILTER IN AREAS WHICH EXCEED TLV.
Ventilation:MECHANICAL/LOCAL EXHAUST MAY BE REQUIRED TO MEET TLV.
Protective Gloves:REQUIRED AS NECESSARY
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:50C
Spec Gravity:1.069
Solubility in Water:INSOLUBLE
Appearance and Odor:REDDISH LIQUID, CHARACTERISTIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER
Stability Condition to Avoid:HEAT, MOISTURE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***