#437

                                           MATERIAL SAFETY DATA SHEET

                               2     Flammability = 2 Reactivity = 0

NFPA RATING: Health =

                               2     Flammability = 2 Reactivity = 0

HMIS RATING: Health =



SECTION I � IDENTITY AND MANUFACTURER'S INFORMATION                                             (0985B)

Manufacturer's Name: HILLYARD INDUSTRIES                       Product Name: KLEEN-UP SOLVENT

Address:                 302 North Fourth Street               Date Prepared: July 15, 1999

                         St. Joseph, MO 64502                  Prepared by:       Regulatory Affairs Department

Emergency Telephone No.: (800) 424-9300 (Only in the event of chemical emergency involving a spill, leak, fire, exposure or

accident involving chemicals.)                                 Other information calls: (816) 233-1321 (Ext. 8285)

                                                                                           http://www.hillyard.com

SECTION II � INGREDIENTS/IDENTITY INFORMATION

Components

 (Specific Chemical Identity:                                                                 OTHER LIMITS

 Common Name(s)                            CAS#         OSHA PEL         ACGIH TLV           RECOMMENDED                %

Stoddard Solvent                         8052-41-3       100 ppm*          100 ppm*           100ppm from mfg.        67-72

Petroleum naphtha (1)                   64742-95-6       100 ppm           100 ppm             50ppm from mfg.        26-31

1,2,4 Trimethyl benzene (2)               95-63-6         25ppm             25ppm               not applicable         9-14

* Regulated by OSHA and the following states: FL, IL, LA, MA, NJ, PA, RI. (1) Regulated like Stoddard Solvent. (2) This product

contains 1,2,4 Trimethyl benzene which is an EPA 313 � SARA Title III ingredient. This chemical is regulated by MA, NJ, PA. V.

O. C. = 802 gm/1.

SECTION III � PHYSICAL / CHEMICAL CHARACTERISTICS

                                                                        25ºC = 0.80       39ºC = 0.80

      Boiling Point:                     Specific Gravity (H2O= 1):

                        330°F

      Vapor Pressure (mm Hg): 3.4                                                100%

                                         Percent Volatile by Volume (%):

      Vapor Density (AIR = 1): 4.6       Evaporation Rate (ethyl ether = 1): slower than 1

                              negligible                            thin, clear liquid; mineral spirit odor

      Solubility in Water:               Appearance and Odor:

SECTION IV � FIRE AND EXPLOSION HAZARD DATA

                                                                                        1.9%     UEL =         N/A-mixture

      Flash point:                                    Flammable Limits: LEL =

                       108°F (T.C.C.) average

      Extinguishing Media: Use water spray to cool fire-exposed surfaces and to protect personnel. Isolate "fuel" supply from

      fire. Use foam, or dry chemical. Use NFPA Class B Extinguishers.

      Special Fire Fighting Procedures: Treat as any petroleum solvent fire. Avoid spray water directly into storage containers

      due to danger of boilover. Avoid spreading liquid and fire by water. Wear full protective equipment including self-

      contained breathing apparatus.

      Unusual Fire and Explosion Hazards: Keep container closed and isolated from heat, electrical equipment, sparks and

      flame. This liquid is volatile and gives off invisible vapors. Either the liquid or vapor may settler in low areas or travel

      some distance along the ground or surface to ignition sources where they may ignite or explode. Empty drums should be

      completely drained, properly capped and properly disposed of.

SECTION V � PHYSICAL HAZARDS

                     Stable                                          Elevated temperatures

      Stability:                             Conditions to Avoid:

      Incompatibility (Materials to Avoid): Avoid contact with strong acids and strong oxidizing agents.

      Hazardous Decomposition Products or Byproducts: None under normal conditions. Thermal decomposition may

      produce organic acids, carbon dioxide and carbon monoxide.

                                       Will not occur                                      N/A

      Hazardous Polymerization:                                  Conditions to Avoid:

SECTION VI � HEALTH HAZARD DATA

                                              Yes     Skin?      Yes         Ingestion? Yes

      Routes of entry:        Inhalation?

      HEALTH HAZARDS (1. Acute and 2. Chronic)

      1. Causes skin irritation; prolonged skin contact may cause severe irritation. Harmful or fatal if swallowed. Causes nose and

      throat irritation. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Reports

      have associated repeated and prolonged occupational overexposure to solvent with permanent brain and nervous system

      damage. 2. None known to Hillyard.

      Chemical listed as Carcinogen or Potential Carcinogen:

                                                 No                                         No          OSHA = No

      National Toxicology Program =                          I.A.R.C. Monographs =

      This product has no carcinogens listed by IARC, NTP, NIOSH, or ACGIH as of this date, greater than or equal to 0.1%.

page 2 of #437 � Kleen-Up Solvent

SECTION VI � HEALTH HAZARD DATA continued

Signs and Symptoms of Exposure: Causes skin irritation. May cause nose and throat irritation. Ingestion may cause gastrointestinal

irritation, nausea, vomiting and diarrhea. Vapor harmful; overexposure may affect the brain or nervous system causing dizziness, headache

or nausea.

Medical Conditions Generally Aggravated by Exposure: Skin problems such as industrial dermatitis. Individuals with chronic

respiratory disorders such as asthma, chronic bronchitis, emphysema, etc., may be adversely affected by exposure to any vapor or airborne

particulate matter.

Emergency and First Aid Procedures: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty

is experienced, get medical assistance immediately. In case of skin contact, wash thoroughly with soap and water and get medical

assistance immediately; for eye contact immediately flush with plenty of water for at least 15 minutes. If swallowed, do not induce

vomiting. Call a physician.

SECTION VII � PRECAUTIONS FOR SAFE HANDLING AND USE

Steps To Be Taken In Case Material Is Released Or Spilled: If spilled, contain spilled material with sand or earth and remove with

inert absorbent and non-sparking tools. Do not use combustible materials such as sawdust. Remove all sources of ignition (flames, hot

surfaces; electric, static or friction sparks). Avoid breathing vapors. Ventilate area. Emptied containers may retain hazardous residue and

explosive vapors. Keep away from heat, sparks, and flames. Do not cut, puncture or weld on or near this container. Follow label warnings

until container is thoroughly cleaned or destroyed. Keep container closed when not in use. Do not store at temperatures over 100°F. Do not

let spilled or leaking material enter watercourse. Notify authorities if liquid enters nearby water intakes. Notify local health and wildlife

officials. Do not smoke when working with product. Do not pick up solution with automatic scrubber or wet pick-up vacuum.

Waste Disposal Method: Dispose of contaminated absorbent, container and unused contents in accordance with Federal, State and Local

regulations. Incinerate regulated quantities in an approved facility; do not incinerate closed container. EPA Hazardous Waste (per RCRA

Classification: Ignitable Liquid (40 CFR 261.21).

Precautions To Be Taken In Handling And Storing: Keep containers closed when not in use. Empty container may retain hazardous

residue and explosive vapors; do not pressurize, cut, weld, braze, solder, drill or grind on or near container. Follow label warnings until

container is thoroughly cleaned or destroyed.

Other Precautions: Keep away from heat and flame. Prevent build-up of vapors by opening all windows and doors to achieve cross-

ventilation. USE ONLY WITH ADEQUATE VENTILATION. Do not breathe vapors or spray mist. Ensure fresh air entry during

application and drying. If you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor / mist levels are

above applicable limits, wear an appropriate, properly fitted respirator (NIOSH/MSHA approved) during and after application. Follow

respirator manufacturer’s directions for respirator use. Close container after each use. Avoid contact with eyes, skin and clothing. Wash

thoroughly after handling. Do not take internally.

SECTION VIII � CONTROL MEASURES

Respiratory Protection (Specify Type): Wear appropriate, properly fitted respirator (NIOSH and MSHA approved) unless air monitoring

demonstrates vapor or mist levels are below applicable limits.

Ventilation: At least 10 air changes per hour recommended.

                     Recommended                                     Recommended          Special = N/A            Other = N/A

Local Exhaust =                           Mechanical (General) =

Protective Gloves: Solvent impervious rubber gloves                       Eye Protection: Safety glasses with splash guards

Other Protective Clothing or Equipment: Solvent impermeable clothing

Work / Hygienic Practices: Wash clothing before reuse. Thoroughly clean contaminated shoes; if soaked throw them away.

SECTION IX � TRANSPORTATION INFORMATION

Applicable regulations: CFR = no IMCO = yes IATA = yes

Proper shipping name for air and foreign water: Paint related material, 3, UN1263, III

Proper shipping name for highway: Cleaning compound

UN No.: not applicable for highway Limited Qty.: not applicable Hazard class: not applicable for highway

Labels required: not required for highway DOT Exception: not applicable

EPA Hazardous waste characteristics:

Ignitability = yes; Corrosivity = not applicable; Reactivity = not applicable

                                                DISCLAIMER OF WARRANTIES

NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, OR OF ANY NATURE ARE MADE WITH RESPECT TO THE PRODUCT(S) OR INFORMATION

CONTAINED IN THIS MATERIAL SAFETY DATA SHEET.

The information and recommendations contained in this Material Safety Data Sheet are supplied pursuant to 29 CFR 1910.1200 of the

Occupational Safety and Health Standards Hazard Communication Rule. All information contained herein is presented in good faith and is

believed to be appropriate and accurate.

THE BUYER OR USER ASSUMES ALL RISKS ASSOCIATED WITH THE USE, MISUSE OR DISPOSAL OF THIS PRODUCT. THE

BUYER OR USER IS RESPONSIBLE TO COMPLY WITH ALL FEDERAL, STATE OR LOCAL REGULATIONS CONCERNING

THE USE, MISUSE OR DISPOSAL OF THESE PRODUCTS.