Material Safety Data Sheet # 306
Hercules Chemical Company Inc.
111 South Street
Passaic NJ 07055-7398
Information Telephone: 1-800 221-9330
Internet: www.herchem.com
Transport Symbol
NFPA HMIS PPE
Preparation: 04/26/06 Revision Date: 8/5/08 Revision Number 1
1. PRODUCT AND COMPANY IDENTIFICATION
Product Identity: Cloroben PT Bio1
Intended Use: Liquid Bioactive Flow Improver
Manufacturer: Hercules Chemical Company, Inc. Information Telephone: (800) 221-9330
111 South Street
Passaic, New Jersey 07055-7398 Internet: http://www.herchem.com
Emergency Phone: CHEMTREC: (800) 424-9300
MSDS Date of Preparation: 07/16/08
2. HAZARDS IDENTIFICATION
This product is a white to off-white, opaque liquid with a spice odor.
Emergency Overview
CAUTION!
Causes irritation to eyes, skin and open wounds.
Inhalation of vapors or mists may cause
mucous membrane and respiratory irritation.
May cause dermatitis and skin sensitization.
Primary route of Exposure: Inhalation, skin, ingestion
Ingestion: Ingestion may cause irritation to the mucous membranes and gastrointestinal tract.
Inhalation: Inhalation of vapors or mists may cause irritation of the nose throat and upper respiratory tract. May
cause allergic reaction in sensitive individuals.
Eye: May cause irritation. The bacterial cultures in this product are nonpathogenic; however, they may cause infection to
eyes following direct contact. These microorganisms are susceptible to common antibiotics.
Skin: Prolonged contact may cause irritation. Dermatitis and skin sensitization can develop after repeated or prolonged
contact. These microorganisms are nonpathogenic, however, contact with open wound may cause infection. These
microorganisms are susceptible to common antibiotics.
Page 1 / 5
Cloroben PT Bio1 鈥? MSDS # 306
Hercules Chemical Company, Inc. MSDS # 306 - Cloroben PT Bio1
_______________________________________________________________________________________
3. COMPOSITION/INFORMATION ON INGREDIENTS
Component CAS No. Amount
Bacterial Cultures Not Applicable 1-5%
Alkanolamide 61791-31-9 1-5%
Alcohol Ethoxylate 68439-46-3 1-5%
Nonionic Surfactant 127087-87-0 1-5%
Water 7732-18-5 90-100%
4. FIRST AID MEASURES
Eye: Immediately flush victim's eyes with large quantities of water for at least 15 minutes, holding the eyelids apart.
Remove contact lenses if present. Get immediate medical attention.
Skin: Wash with soap and water. Remove contaminated clothing and shoes. Launder clothing before re-use. Get medical
attention if irritation or symptoms develop.
Ingestion: If conscious, rinse mouth thoroughly with water and give water or milk to dilute. Never give anything by
mouth to an unconscious or convulsing person Get immediate medical attention. Do not induce vomiting unless directed to
do so by medical personnel.
Inhalation: Immediately remove victim to fresh air. Get medical attention if breathing becomes difficult.
Other: Note to physician: Bacterial organisms in this product are not pathogenic, but can cause infection in contact with
open wound. These organisms are susceptible to commonly used antibiotics.
5. FIRE FIGHTING MEASURES
Flashpoint: None
Autoignition Temperature: Not applicable
Flammable Limits: LEL Not applicable UEL Not applicable
Unusual Fire or Explosion Hazards: None.
Special Fire-Fighting Instructions: Firefighters should wear positive pressure self-contained breathing apparatus and full
protective clothing.
Hazardous Combustion Products: None.
Explosion Data (sensitivity to mechanical impact or static discharge): None known.
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate protective clothing as described in Section 8. Do not flush spill to sewer. Collect using an inert
absorbent material and place in appropriate containers for disposal. Prevent large spills from entering sewers and water
courses. Report releases as required by local, provincial and federal authorities.
7. HANDLING AND STORAGE
Handling: Prevent contact with the eyes, skin and clothing. Avoid spraying, splashing and misting conditions. Avoid
breathing mists. Do not ingest. Avoid contact with food. Wash thoroughly with soap and water after handling. Keep
containers closed when not in use.
Do not reuse containers. Empty containers retain product residues can be hazardous. Follow all MSDS precautions when
handling empty containers.
Storage: Store in a cool, dry area away from incompatible materials. Store at room temperature or cooler. Avoid
temperatures above 32掳C. Keep from freezing.
Cloroben PT Bio1鈥? MSDS # 306 Page 2 / 5
Hercules Chemical Company, Inc. MSDS # 306 - Cloroben PT Bio1
_______________________________________________________________________________________
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines:
Bacterial Cultures None Established
Alkanolamide None Established
Alcohol Ethoxylate None Established
Nonionic Surfactant None Established
Water None Established
Engineering Controls: No special ventilation required for normal use. Avoid spraying or misting conditions.
Respiratory Protection: None required for normal use.
Skin Protection: Wear impervious gloves such as rubber or neoprene if needed to avoid skin contact.
Eye Protection: Chemical safety goggles should be worn where splashing is possible.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance And Odor: This product is a white to off-white, opaque liquid with a spice odor.
Physical State: Liquid Boiling Point: 100掳C
Vapor Density: Same as water Vapor Pressure: Same as water
Solubility In Water: 100% Evaporation Rate: Not applicable (Buac=1)
Specific Gravity: 1.0 pH: 7.0
Melting Point: 0掳C Octanol/Water Coefficient: Not Determined
VOC Content: None Viscosity: Not Determined
10. STABILITY AND REACTIVITY
Stability: Stable under normal storage and handling conditions.
Incompatibility: Contact with strong acids, caustics, bleach or other oxidizers and high temperatures may inactivate
biological cultures.
Hazardous Decomposition Products: None known.
Extinguishing Media: Use media appropriate for surrounding fire.
Hazardous Polymerization: Will not occur.
.
11. TOXICOLOGICAL INFORMATION
HEALTH HAZARDS:
Target Organ Effects:
Sensitization: May cause skin sensitization after prolonged or repeated contact.
Chronic: Prolonged exposure may cause dermatitis.
Carcinogenicity: None of the components is listed as a carcinogen or suspected carcinogen by IARC, NTP or OSHA.
Mutagenicity: None known.
Medical Conditions aggravated by Exposure: Employees with pre-existing eye, skin and respiratory disease or
asthma may be at increased risk from exposure.
Cloroben PT Bio1鈥? MSDS # 306 Page 3 / 5
Hercules Chemical Company, Inc. MSDS # 306 - Cloroben PT Bio1
_______________________________________________________________________________________
Acute Toxicity Values: Bacterial Cultures: No toxicity data is available
Alkanolamide: No toxicity data is available
Alcohol Ethoxylate: Oral Rat LD50 鈥? 500-2000 mg/kg ; Skin Rat LD50 >2000 mg/kg;
Inhalation Rat LC50 >20 mg/L/1 hr
Nonionic Surfactant: Oral Rat LD50 1300 mg/kg; Skin Rabbit LD50 2000 mg/kg
12. ECOLOGICAL INFORMATION
No data available for product.
13. DISPOSAL CONSIDERATIONS
Before disposing, rinse container with water. Dispose in accordance with local, state and federal environmental regulations.
14. TRANSPORT INFORMATION
DOT TDG MEX
Not regulated for Not regulated for Not regulated for
Proper Shipping
transport transport transport
Name:
None None
None
UN Number:
None None
None
Labels Required:
None
Hazard Class / None None
Packing Group:
15. REGULATORY INFORMATION
Inventory Status.
TSCA: Complies
DSL: Complies
U.S. Federal Regulations
SARA 313.
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not
contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal
Regulations, Part 372.
SARA 311/312 Hazard Categories
Acute Health Hazard No
Chronic Health Hazard No
Fire Hazard No
Sudden Release of Pressure Hazard No
Reactive Hazard No
California Proposition 65
This product contains no chemicals requiring reporting under Proposition 65.
This product has been classified under the CPR and this MSDS discloses information elements required by the CPR.
Canadian WHMIS Classification: Class D-2-B (Eye and Skin Irritant). This product complies with TSCA and
Cloroben PT Bio1鈥? MSDS # 306 Page 4 / 5
Hercules Chemical Company, Inc. MSDS # 306 - Cloroben PT Bio1
_______________________________________________________________________________________
WHMIS: Class D-2-B (Eye and Skin Irritant)
16. OTHER INFORMATION
NFPA Rating: Health = 1 Fire = 0 Reactivity = 0
HMIS Rating: Health = 1 Fire = 0 Reactivity = 0
Disclaimer
The information provided on this MSDS is correct to the best of our knowledge, information and belief at the date of its
publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation,
disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the
specific material designated and may not be valid for such material used in combination with any other material or in any
process, unless specified in the text.
Cloroben PT Bio1鈥? MSDS # 306 Page 5 / 5
|