CPD庐 ODORLESS CHEMICAL FORM
RELEASE AGENT
DESCRIPTION STORAGE
CPD庐 Odorless Chemical Form Release Agent is premium Store under heated warehouse conditions where possible.
Avoid all contamination with water (for exterior storage
multiple release agent with no odor.
store on side only). Sub-zero storage (0掳C/32掳F) not
recommended.
WHERE TO USE
Suitable for use on steel forms in pipe casting and precast
plants, plywood, timber and plastic faced forms and SHELF LIFE
Two years from the date of manufacture in original,
molds.
containers providing product has not been contaminated
with water.
BENEFITS
鈥? ready-to-use (do not dilute)
SAFETY PRECAUTIONS
鈥? non-toxic and therefore can be used in potable water
Combustible Liquid. Controlled product under WHMIS
reservoir construction.
regulations. Consult Material Safety Data Sheet
鈥? will not discolor or stain concrete
(M.S.D.S.) for specific instructions. MSDS # 15.
鈥? odorless
鈥? very effective on steel forms
WARRANTY
The recommendations made and the information herein is
APPLICATION
based on our own and independent laboratory experience,
Forms must be clean, dry and free from cement residue,
and is believed to be accurate under controlled conditions.
rust, scale, etc. Brush or spray on a thin coating avoiding
However, no warranty or guarantee of accuracy is made
excessive build-up, runs or puddles as an excess of
because we cannot cover every possible application of
material may surface retard the concrete. Initially apply
product nor anticipate every variation encountered in
before the first casting and thereafter re-apply as required.
weather conditions, job-conditions, methods used, and
types of surfaces on which the product is applied. The
Note: New timber and plywood may completely absorb
users shall make their own tests to determine the suitability
the first coat requiring a second application.
of such products for any particular purpose.
LIMITATIONS
CPD庐 makes no warranties with respect to this product,
鈥? not for lift or tilt-up construction
expressed or implied, without limitation, the implied
鈥? not recommended for use in auto claves
warranties of merchantability or fitness for a particular
purpose.
COVERAGE
Coverage rate may vary depending on the texture and
CPD庐鈥? liability shall be limited in all events to supplying
s
absorption rate of the forms:
sufficient product to re-treat and/or repair the specific area
Wood, plywood forms 17-24m虏/L (700-1000 ft虏/U.S.gal)
to which CPD庐 product has been applied. CPD庐 reserves
Plastic and metal forms 27-29m虏/L (1000-1200 ft虏/U.S.
the right to have the true cause of any difficulty determined
gal)
by accepted test methods. CPD庐 shall have no other
liability, including liability for incidental, consequential or
PACKAGING
resultant damages, however caused, whether due to breach
208L (55 U.S. gal) drums - 194 kg (428 lbs.)/drum
of warranty, negligence, or strict liability.
18.9L (5 U.S. gal) pails - 18 kg (40 lbs.)/pail
THIS WARRANTY MAY NOT BE MODIFIED OR
CLEAN UP
EXTENDED BY REPRESENTATIVES OF CPD庐, ITS
Clean spray equipment, brushes, etc with mineral spirits
DISTRIBUTORS OR DEALERS.
solvent.
0310-02-1105
|