Material Safety Data Sheet

SECTION I � PRODUCT IDENTIFICATION



MANUFACTURER:                                                PRODUCT NAME:

ProTec International, Inc.                                   XL-17 Anti-Friction Metal Treatment

1747 Bartlett Road                                           Product #: 50000

Memphis, TN 38134

1-800-843-5649                                               REVISION DATE: 01/12/00





SECTION II � PRODUCT COMPOSITION



LIGHT NAPHTHALIC HYDROCARBON OIL SYNTHETIC PETROLEUM PARAFFINIC LONG CHAIN

HYDROCARBON PLASTIZIER OILS WITH LESS THAN 1% DETERGNET DESPERSANTS ADDITIVES.



Please note that the chemical identity of some or all the above ingredients is confidential business

information and is being withheld as permitted by 29CFR 1910.1200 and various State Right To Know Laws.





SECTION III � PHYSICAL DATA



BOILING POINT: N/A                                        SPECIFIC GRAVITY: 1.0994

VAPOR PRESSURE: N/A                                       MELTING POINT: N/A

VAPOR DENSITY: 4.0                                        EVAPORATION RATE: N/A

SOLUBILITY IN WATER: N/A

APPEARANCE AND ODOR: Light amber liquid with odor of oil.





SECTION IV � FIRE AND EXPLOSION HAZARD DATA



FLASH POINT: 272 F (closed cup)

EXTINGUISHING MEDIA: Combustible, flows freely when hot, and should be treated when hot, and should

                             be treated when exposed in fire area.

SPECIAL FIRE FIGHTING PROCEDURES: Treated as hot oil, CO2.

UNUSUAL FIRE AND EXPLOSION HAZARDS: Possible gaseous decomposition products. Use OSHA

                                            approved full-faced canister.





SECTION V � HEALTH HAZARDS



PRIMARY ROUTES OF ENTRY: INHALATION AND SKIN CONTACT.



EMERGENCY AND FIRST AID PROCEDURES:

    EYE CONTACT: FLUSH EYES FOR 15 MINUTES WITH WATER

    SKIN CONTACT: WASH WITH WARM SOAPY WATER

    INHALATION: REMOVE TO FRESH AIR.

    INGESTION: CONSULT WITH PHYSICIAN

SECTION VI � REACTIVITY DATA



STABLILITY: Stable

HAZARDOUS DECOMPOSITION PRODUCTS: Temperature exceeding 400F. Possibly traces of halogen

                                       gas.

HAZARDOUS POLYMERIZATION: Will not occur.







SECTION VII � SPILL AND DISPOSAL PROCEDURES



SPILLS: Adsorb with “Oil Dry� or similar product, place in recovery drum and dispose properly.

DISPOSAL: Follow Federal, State and Local regulations.







SECTION VIII � SAFE HANDLING AND USE INFORMATION



RESPIRATORY PROTECTION: None below 44F

VENTILATION: Local exhaust: 400F

PROTECTION EQUIPMENT: Eye protection (safety glasses) and chemical gloves as necessary to prevent

                                 excess contact.







SECTION IX � SPECIAL PRECAUTIONS



Precautions in handling and storing: None except in case of spill. Eye wash should be available for

emergency use.







NOTE: N/A = NOT APPLICABLE OR NOT AVAILABLE.



THIS INFORMATION IS GIVEN IN GOOD FAITH WITH THE BEST INFORMATION AVAILABLE AT THIS

TIME.