Material Safety Data Sheet

SECTION I � PRODUCT IDENTIFICATION



MANUFACTURER:                                                    PRODUCT NAME:

ProTec International, Inc.                                       ProTec XL-240 Aerosol Spray

1747 Bartlett Road                                               Product #: 40000

Memphis, TN 38134

1-800-843-5649                                                   REVISION DATE: 09/01/00





SECTION II � PRODUCT COMPOSITION



HAZARDOUS MATERIAL DECRIPTION: NON-FLAMMABLE GAS



Petroleum Distillate      45%

Petroleum Hydrocarbon     10%

Napthinic Petroleum Oil   10%

Carbon Dioxide Propellant 3%

Plasticizer E             32%

THIS PRODUCT DOES NOT CONTAIN ANY CFC’S





Please note that the chemical identity of some or all of the above ingredients is confidential business

information and is being withheld as permitted by 29CFR 1910, 1200 and various State Right to Know

Laws.





SECTION III � PHYSICAL DATA



BOILING POINT: 200-500F                                          SPECIFIC GRAVITY: 1.09

VAPOR PRESSURE: 1mm                                              MELTING POINT: N/A

VAPOR DENSITY (AIR=1): 2                                         VOLATILE BY VOLUME(%): 25%

SOLUBIITY IN WATER: N/A                                          EVAPORATION RATE: 0.1

APPEARANCE AND ODOR: Light Amber with Oil Odor                   FORM OF MATERIAL: Aerosol







SECTION IV � FIRE AND EXPLOSION HAZARD DATA



FLASH POINT: 160F                                       METHODS USED: C.O.C.

EXTINGUISHING MEDIA: Foam, CO2, Dry Chemical

SPECIAL FIRE FIGHTING PROCEDURES:       Use spray water to keep exposed container cool. Treat

                                        as petroleum oil.

UNUSUAL FIRE AND EXPLOSION HAZARDS: Contents under pressure. Propellant used as CO2,

                                        Carbon dioxide. Temperatures in excess of 120F are

                                        potentially explosive.

                                                                                            MSDS-XL240A2









SECTION V � HEALTH INFORMATION



THRESHOLD LIMIT VALUE: 200 ppm for 8 hours

EFFECTS OF OVER EXPOSURE: Headaches, Dizziness. Prolonged skin contact may cause dermatitis.

PRIMARY ROUTES OF ENTRY: Inhalation, Skin contact, Eye contact

EMERGENCY AND FIRST AID PROCEDURES:

EYE CONTACT:             Flush with clean water.

SKIN CONTACT:            Wash with soap and water.

INHALATION:              May cause dizziness.

INGESTION:               Do not induce vomiting. Consult Physician.







SECTION VI � REACTIVITY DATA

STABILITY: Stable

CONDITIONS TO AVOID: Temperatures above 120F.

HAZARDOUS DECOMPOSITION PRODUCTS: None Identified

HAZARDOUS POLYMERIZATION: Will not occur

INCOMPATIBILITY WITH OTHER MATERIALS: Halogen Compounds









SECTION VII � SPILL AND DISPOSAL PROCEDURES



SPILLS:     Eliminate any source of ignition, absorb with dry inert material, sand, clay, etc., and shovel

            up for disposal.

DISPOSAL:   Dispose of in accordance with local, state, and federal regulations regarding health and

            pollution.

VOLATILE ORGANIC COMPOUND (VOC)(AS PACKAGED, MINUS WATER)







SECTION VII � SAFE HANDLING AND USE INFORMATION



RESPIRATORY PROTECTION: Use respiratory protection when used in unventilated area.

VENTILATION: Local Exhaust � Not necessary unless heated. Mechanical � N/A

PROTECTIVE GLOVES: Use chemical resistant.

EYE PROTECTION: Yes, safety glasses for petroleum distillate.

OTHER PROTECTIVE EQUIPMENT: N/A







SECTION VIII � SPECIAL PRECAUTIONS



HANDLING AND STORING: Storage temperature not to exceed 120F. Keep containers closed. Avoid

                      Heat.

OTHER PRECAUTIONS:    Avoid inhaling vapors.









THIS MATERIAL SAFETY DATA SHEET AND THE INFORMATION IT CONTAINS IS OFFERED TO

                       YOU IN GOOD FAITH AS ACCURATE.