Benzotriazol-1-oxy-tris(Demethylamino)phosphonium Hexafluorophosphate(BOP)
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
CATALOG No. 40102
MSDS Name BOP
Synonyms Benzotriazol-1-oxy-tris(Demethylamino)phosphonium Hexafluorophosphate;
Benzotriazol-1-yl-oxy-tris(dimethylamino) phosphonium hexafluorophosphate;
Benzotriazol-1-yloxytris(dimethylamino) phosphonium hexafluorophosphate
Company Identification: Shanghai Medpep Co., Ltd.
For information, Call: +86 21 65566949
SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazard Component: BOP
Purity: 99% min.
CAS No 56602-33-6
Molecular Formula: C12H22F6N6OP2
Molecular Weight: 442.5
SECTION 3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Moisture sensitive.Light sensitive.
POTENTIAL HEALTH EFFECTS
EYES:
May cause eye irritation.
SKIN
May cause eye irritation.
INGESTION
Ingestion of large amounts may cause gastrointestinal irritation. The toxicological properties of this
substance have not been fully investigated.
INHALATION
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully
investigated.
Not available
SECTION 4. FIRST-AID MEASURES
EYES:
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.
Get medical aid.
SKIN
Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid if irritation develops or persists.
INGESTION:
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
INHALATION
Remove from exposure and move to fresh air immediately. Get medical aid if cough or other symptoms
appear.
NOTES FOR PHYSICIAN
Not available..
SECTION 5. FIRE FIGHTING MEASURES
FLAMMABILITY: Not available
FLASH POINT Not available
AUTOIGNITION TEMPERATURE: Not available
EXPLOSION LIMITS, LOWER: Not available
EXPLOSION LIMITS, UPPER: Not available
EXTINGUISHING MEDIA In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant
foam
GENERAL INFORMATION As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Dusts at sufficient
concentrations can form explosive mixtures with air.
SECTION 6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS: Use proper personal protective equipment as indicated in Section 8.
SPILLS AND LEAKS: Vacuum or sweep up material and place into a suitable disposal container. Avoid
generating dusty conditions.
ENVIRONMENTAL PRECAUTIONS: Not available.
SECTION 7. HANDLING AND STORAGE
HANDLING
Use with adequate ventilation. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
STORAGE
Store in a cool, dry place. Keep refrigerated. (Store below 4?C/39?F.)
HYGIENE PRACTICES
Not available.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS
Use adequate ventilation to keep airborne concentrations low. Personal Protective Equipment.
EYES Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye
and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
SKIN AND CLOTHING: Wear appropriate protective gloves to prevent skin exposure. Wear appropriate
protective clothing to prevent skin exposure
RESPIRATORS Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European
Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when
necessary.
OTHER PROTECTIVE
Not available
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:: White crystalline powder.
ODOR: Not available
pH: Not available
VAPOR PRESSURE: Not available.
VISCOSITY: Not available.
BOILING POINT: Not available.
Freezing/Melting Point: 135~140 掳C (dec.)
Decomposition Temperature: Not available
Solubility in water: Not available
Specific Gravity/Density: Not available
SECTION 10. STABILITY AND REACTIVITY
CHEMICAL STABILITY: Stable under normal temperatures and pressures.
CONDITIONS TO AVOID Ignition sources, excess heat, strong oxidants.
INCOMPATIBILITY WITH OTHER MATERIALS Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS Nitrogen oxides, carbon monoxide, carbon dioxide,
hydrogen fluoride gas.
HAZARDOUS POLYMERIZATION: Has not been reported.
SECTION 11. TOXICOLOGICAL INFORMATION
RTECS #:
EYE EFFECT
SKIN EFFECT
INGESTION EFFECT .
INHALATION EFFECT
OTHER TOXICOLOGICAL INFORMATION: Not available.
SECTION 12. ECOLOGICAL INFORMATION
ECOTOXICITY: Not available.
BIOACCUMULATION: Not available.
BIODEGREDATION: Not available.
ENVIRONMENTAL STABILITY: Not available.
SECTION 13. DISPOSAL CONSIDERATIONS
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
SECTION 14. TRANSPORT INFORMATION
Not available.
SECTION 15. REGULATORY INFORMATION
Chinese Governmental regulations
SECTION 16. OTHER INFORMATION
LAST UPDATED 2006,4,28
THE INFORMATION ABOVE IS BELIEVED TO BE ACCURATE AND REPRESENTS THE BEST
INFORMATION CURRENTLY AVAILABLE TO US. HOWEVER, WE MAKE NO WARRANTY OF
MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO
SUCH INFORMATION, AND WE ASSUME NO LIABILITY RESULTING FROM ITS USE. USERS
SHOULD MAKE THEIR OWN INVESTIGATIONS TO DETERMINE THE SUITABILITY OF THE
INFORMATION FOR THEIR PARTICULAR PURPOSES. IN NO EVENT SHALL CII BE LIABLE FOR
ANY CLAIMS, LOSSES, OR DAMAGES OF ANY THIRD PARTY OR FOR LOST PROFITS OR ANY
SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, HOWSOEVER
ARISING, EVEN IF CII HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
|