Material Safety Data Sheet
Page 1 of 4 Issue date: March 2001
Hazardous according to criteria of Worksafe Australia
Epirez Supatuff AS-550 Neutral Hardener
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
ITW Polymers & Fluids Pty Ltd
100 Hassall St Wetherill Park NSW 2164 Australia
Ph: +61 2 9757 8800 Fax: +61 2 9757 3855
Emergency: 000
Product Name: Epirez Supatuff AS-550 Neutral Hardener
Synonyms: Amine Adduct
Manufacturer's Product Code: 792908
Use: Antislip Epoxy Coating Hardener
UN Number: 1760
Proper Shipping Name: CORROSIVE LIQUID, N.O.S.
Dangerous Goods Class: 8
Subsidiary risk: None allocated
Packing Group: III
Hazchem Code: 3X
Poison Schedule: S5
2. COMPOSITION / INFORMATION ON INGREDIENTS
SUBSTANCE NAME Proportion CAS Number
AMINE ADDUCT 30 to 60% 2855-13-2
OTHER NON-SCHEDULED To 100 Free
3. HAZARD IDENTIFICATION
Hazardous according to the criteria of Worksafe Australia
Hazard Category: Harmful, Corrosive
ACUTE HEALTH EFFECTS
Swallowed:
Harmful if swallowed.
Will cause burns to the mouth, mucous membranes, throat, oesophagus and stomach. If sufficient quantities are ingested
(swallowed) death may occur.
Eye:
Will cause burns to the eyes with effects including: Pain, tearing, conjunctivitis and if duration of exposure is long
enough, blindness will occur.
Skin:
Harmful by skin contact.
Will cause burns to the skin, with effects including; Redness, blistering, localised pain and dermatitis.
Inhaled:
Will cause severe irritation to the nose, throat and respiratory system with effects including: Dizziness, headache,
coughing, loss of co-ordination, chest pains, respiratory paralysis and or failure.
Chronic:
Product may also be absorbed through the skin with resultant toxic effects.
Prolonged or repeated exposure may lead to irreversible damage to health.
Prolonged or repeated skin contact will lead to necrosis (death) of the skin.
Material Safety Data Sheet
Page 2 of 4 Issue date: March 2001
Hazardous according to criteria of Worksafe Australia
Epirez Supatuff AS-550 Neutral Hardener
4. FIRST AID MEASURES
Swallowed:
If swallowed, DO NOT induce vomiting. If victim is conscious give 3 to 4 glasses of water to drink. Urgently transport
to hospital or doctor.
Eye:
If material is splashed into eyes, flush with plenty of water for at least 15 minutes, ensuring eye lids are held open.
Immediately transport to hospital or doctor.
Skin:
If material is splashed onto the skin, remove any contaminated clothing and wash skin thoroughly with water and soap.
Immediately transport to hospital or doctor.
Inhaled:
Remove victim to fresh air. Do not use mouth-to-mouth method if victim inhaled the substance; induce artificial
respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Administer oxygen if breathing is difficult.
First Aid Facilities:
Eye wash fountain, safety shower and normal wash room facilities.
Advice to Doctor:
Due to the potential for esophageal or gastrointestinal tract burns following ingestion, emesis should not be induced and
gastric lavage done only with caution. Immediate dilution with water or milk might be beneficial.
5. FIRE-FIGHTING MEASURES
Fire/Explosion Hazard
EXTINGUISHING MEDIA: Use dry chemical, carbon dioxide, foam or water fog.
SPECIAL FIRE FIGHTING PROCEDURES: Self-contained breathing apparatus (SCBA) required for fire-fighting
personnel. If possible to do so safely, shut off fuel to fire. Use water spray to spray to cool fire-exposed surfaces and to
protect personnel.
UNUSUAL FIRE AND EXPLOSION HAZARDS: If tanks, drums or containers of this material are heated, they may
rupture and project corrosive materials over a wide area.
Flammability
Heat or damage to containers may release corrosive or toxic fumes.
6. ACCIDENTAL RELEASE MEASURES
EMERGENCY ACTION:
Keep unnecessary people away; Isolate hazard area and deny entry. Stay upwind; Keep out of low areas. Do not walk or
touch spilt material unless wearing personal protection as outlined under MSDS.
SPILL OR LEAK PROCEDURE:
Shut off ignition sources, no flares, smoking or flames in hazard area. Stop leak if you can do it without risk. Water
spray may reduce vapour.
SMALL SPILLS:
Take up with sand, dirt or vermiculite. DO NOT use sawdust. Use non-sparking tools. Place into labeled drum(s) for
later disposal.
LARGE SPILLS:
Notify Emergency Services (Police or Fire Brigade). Tell them exact location, nature, hazards, quantities, type of
vehicle and any other information that would be helpful. Contain spill. Remove all ignition sources and safely stop flow
of spill. Bund area. Trained personnel should wear Personal Protective equipment as highlighted in this MSDS. Blanket
the spill with foam or use water fog to disperse vapour clouds. Consult an expert regarding disposal of this product.
Material Safety Data Sheet
Page 3 of 4 Issue date: March 2001
Hazardous according to criteria of Worksafe Australia
Epirez Supatuff AS-550 Neutral Hardener
7. HANDLING AND STORAGE
Avoid prolonged breathing of vapors and skin or eye contact. Store in a cool place and out of direct sunlight. Store
away from sources of heat or ignition. Store away from oxidizing agents and strong acids. Keep containers tightly
closed, when not using the product. Store in original packages as approved by manufacturer.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Standards
No exposure standards are available for this product, however, the following exposure standards have been assigned by
the National Occupational Health & Safety Commission (NOHSC) to the following components of the product:
AMINE ADDUCT
No exposure standards have been assigned by the National Occupational Health & Safety Commission (NOHSC)
Engineering Controls
Corrosive liquid. Maintain adequate ventilation at all times. In most circumstances natural ventilation systems are
adequate unless the material is heated, reacted or otherwise changed in some type of chemical reaction, then the use of a
local exhaust ventilation system is recommended.
Personal Protection Equipment
CLOTHING: Neoprene or nitrile apron
GLOVES: Gauntlet length Neoprene or nitrile.
EYES: Chemical goggles or faceshield to protect eyes.
RESPIRATORY PROTECTION: Avoid breathing of vapours. Select and use respirators in accordance with AS/NZS
1715/1716. The use of a half-face organic vapour with combined P1 (dust/mist) respirator with replaceable filters is
recommended. Filter capacity and respirator type depends on exposure levels and type of contaminant. If entering
spaces where the airborne concentration of a contaminant is unknown then the use of a Self-contained breathing
apparatus (SCBA) with positive pressure air supply complying with AS/NZS 1715 / 1716, or any other acceptable
International Standard is recommended.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear Yellow Liquid
Boiling Point Melting Point: Not Determined
Vapour Pressure: N/A
Specific Gravity: 1.02 gm /ml
Flash Point: > 100 掳 C (Pensky Martin Closed Cup )
Flammability Limits: N/A
Solubility in Water: Insoluble
10. STABILITY AND REACTIVITY
STABILITY:
Stable under normal conditions of use.
HAZARDOUS DECOMPOSITION PRODUCTS:
Emits choking and corrosive fumes when heated to decomposition.
HAZARDOUS POLYMERIZATION:
Will not occur.
INCOMPATIBILITIES:
Strong alkalis and oxidizing agents.
CONDITIONS TO AVOID:
Incompatibles.
11. TOXICOLOGICAL INFORMATION
There is no toxicological information available for this product.
Material Safety Data Sheet
Page 4 of 4 Issue date: March 2001
Hazardous according to criteria of Worksafe Australia
Epirez Supatuff AS-550 Neutral Hardener
12. ECOLOGICAL INFORMATION
This substance may cause long term adverse effects in the aquatic environment.
This substance may cause long term adverse effects in the environment
13. DISPOSAL CONSIDERATIONS
Refer to appropriate authority in your State. Dispose of material through a licensed waste contractor. Advise on
corrosive nature. Normally suitable for disposal by approved waste disposal agent.
14. TRANSPORT INFORMATION
UN Number: 1760
Proper Shipping Name: CORROSIVE LIQUID, N.O.S.
Dangerous Goods Class: 8
Subsidiary risk: None allocated
Packing Group: III
Hazchem Code: 3X
Classified as a CLASS 8 (CORROSIVE) Dangerous Good according to the Australian Code for the Transport of
Dangerous Goods by Road and Rail, 6th Edition.
Dangerous goods of Class 8 (Corrosive) are incompatible in a placard load with any of the following:
- Class 1
- Class 4.3
- Class 5
- Class 6, if the Class 6 dangerous goods are cyanides and the Class 8 dangerous goods are acids
- Class 7
and are incompatible with food and food packaging in any quantity.
Emergency information(Transport):
Dangerous Goods - Initial Emergency Response Guide (SAA/SNZ HB76:1997)
For TOXIC AND/OR CORROSIVE Guide No: 37
15. REGULATORY INFORMATION
Poison Schedule: S5
This material is a Scheduled S5 Poison and must be stored, handled and used according to the appropriate regulations.
RISK PHRASES
R21/22 Harmful in contact with skin and if swallowed.
R34 Causes burns.
SAFETY PHRASES
S1/2 Keep locked up and out of reach of children.
S26 In case of contact with eyes, rinse immediately with plenty of water and contact a doctor or Poisons Information
Centre.
S28 After contact with skin, wash immediately with plenty of warm soapy water.
S36 Wear suitable protective clothing.
S45 In case of accident or if you feel unwell, contact a doctor or Poisons Information Centre immediately and show
this container or label.
16. OTHER INFORMATION
Contact Point
Technical Manager: (02) 9757 8800
Disclaimer
The information herein is to the best of our knowledge, correct and complete. It describes the safety requirements for
this product and should not be construed as guaranteeing specific properties. Since methods and conditions are beyond
our control we do not accept liability for any damages resulting from the use of, or reliance on, this information in
inappropriate contexts.
|