MATERIAL SAFETY DATA SHEET
MSDS Name: MULTI-PURPOSE FLOORING ADHESIVE
MSDS Number: 07622
Version Number
MSDS Date: APR-27-1999
Page Number: 1
--------------------------------------------------------------------------------
SECTION I - PRODUCT AND COMPANY INFORMATION
Product Name: MULTI-PURPOSE FLOORING ADHESIVE
Hazard Rating: Health: 1 Fire: 0 Reactivity: 0 PPI: B
Company Identification: OSI SEALANTS, INC.
7405 PRODUCTION DRIVE
MENTOR OH 44060
Contact: Safety Officer
Telephone/Fax: (440) 255-8900 (440) 974-2395
Emergency Phone (24 hour) CHEMTREC
(800) 424-9300
Chemtrec (outside-USA) (703) 527-3887
Preparer T.F.Barr
Sr. R.&D. Chemist
Product Class ADHESIVE
Trade Name QUICKBOND
Product Code 07622,07624
SECTION II - INGREDIENT AND HAZARD INFORMATION
Ingredient Name CAS Number Percent TSCA
No OSHA hazardous ingredients known at this time.
SECTION III - PHYSICAL AND CHEMICAL PROPERTIES
Form: High viscosity paste
Appearance/Color: cream
pH Value, +/-.3: 9.
Boiling Range: 212.炉F (100.炉C)
Vapor Pressure (mmHg): 17.@ 68.炉F (20.炉C)
Evaporation Rate: 0.6 times Slower than n-Butyl Acetate
http://www.osisealants.com/MSDS/msds_data/quickbond_msds/07622.html (1 of 5) [11/23/2001 9:16:41 PM]
Vapor Density: like water Heavier than air
% Volatile, Weight approx. 40.%
% Volatile, Volume 45.%
Specific Gravity: 1.07
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: MULTI-PURPOSE FLOORING ADHESIVE
MSDS Number: 07622
Version Number
MSDS Date: APR-27-1999
Page Number: 2
--------------------------------------------------------------------------------
VOC (less H2O or exempt) none
Heavy Elements (ppm) 0.
NOTE:
Odor : Mild acrylic odor. Freeze Point : 32 Deg F
SECTION IV - FIRE FIGHTING MEASURES (Flash,UEL,LEL
for solvent only
Flammability Class N/A
Flash Range: Not Applicable
Explosive Range (LEL/UEL): Not Applicable
EXTINGUISHING MEDIA:
Dry chemical -- Carbon Dioxide -- Foam -- Water Fog
Will not burn in wet state.
SPECIAL FIRE-FIGHTING PROCEDURES:
Water may be used to cool and protect exposed containers.
Caution should be taken because uncured material is watersoluble
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Any closed container may burst when exposed to extreme
heat or fire.
SECTION V - HEALTH HAZARD DATA
ROUTES OF ENTRY:
Inhalation? Yes | Skin? Yes | Ingestion? Yes
TARGET ORGANS...
http://www.osisealants.com/MSDS/msds_data/quickbond_msds/07622.html (2 of 5) [11/23/2001 9:16:41 PM]
None- No hazardous ingredients per OSHA Regulations
CARCINOGENICITY...
NTP? N/A | IARC Monographs? N/A | OHSA? NO
EFFECTS OF OVEREXPOSURE
Inhalation: May irritate respiratory tract.
Skin/Eye Contact: May cause irritation.
Ingestion: Swallowing large amounts may cause nausea,
vomiting or diarrhea.
FIRST AID MEASURES
Inhalation: If affected by inhalation, remove to fresh air.
Eye Contact: Flush with water for at least 15 minutes, and
get prompt medical attention.
Skin Contact: Wash skin thoroughly with soap and water.
Ingestion: Drink copious amounts of water. Induce vomiting
and call a physician.
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: MULTI-PURPOSE FLOORING ADHESIVE
MSDS Number: 07622
Version Number
MSDS Date: APR-27-1999
Page Number: 3
--------------------------------------------------------------------------------
-------------------------------------------------------------------
N/A= Not applicable N/AV=Not available N/E, N/est=Not established
SECTION VI - STABILITY AND REACTIVITY
Stability: This product is stable
Hazardous Polymerization: Hazardous polymerization will not occur
INCOMPATABILITY:
None
CONDITIONS TO AVOID:
None
HAZARDOUS DECOMPOSITION PRODUCTS:
May produce oxides of carbon and oxides of nitrogen when burned.
SECTION VII - ACCIDENTAL RELEASE AND DISPOSAL
MEASURES:
STEPS TO BE TAKEN IN CASE OF SPILL:
http://www.osisealants.com/MSDS/msds_data/quickbond_msds/07622.html (3 of 5) [11/23/2001 9:16:41 PM]
Wear appropriate protective clothing. Add dry absorbent and
shovel or sweep up. Place in an appropriate container and seal.
WASTE DISPOSAL METHOD:
Dispose of in accordance with Federal, State, and Local regulations.
SECTION VIII - EXPOSURE CONTROLS/PERSONAL
PROTECTION
Occupational Exposure Limits
ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL
RESPIRATORY PROTECTION:
NIOSH approved respirators recommended if vapors and mists
are generated.
VENTILATION:
Local exhaust is recommended for safe practice.
PROTECTIVE CLOTHING:
Rubber gloves and impervious clothing should be worn to prevent
repeated skin contact.
EYE PROTECTION:
Splashproof goggles or safety glasses should be worn.
HANDLING AND STORAGE PRECAUTIONS:
Keep from freezing. Keep away from heat.
Keep out of the reach of children
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: MULTI-PURPOSE FLOORING ADHESIVE
MSDS Number: 07622
Version Number
MSDS Date: APR-27-1999
Page Number: 4
--------------------------------------------------------------------------------
Keep containers closed when not in use
Avoid prolonged or repeated contact with skin.
SECTION IX - TRANSPORT INFORMATION:
DOT CLASSIFICATIONS FOR CARTRIDGES 10 or 29 oz.
DESCRIPTION: Non-hazardous
DOT CLASSIFICATIONS for 1 GALLON or larger CONTAINERS
http://www.osisealants.com/MSDS/msds_data/quickbond_msds/07622.html (4 of 5) [11/23/2001 9:16:41 PM]
DESCRIPTION: Non-hazardous
Caulking type product
SECTION X - REGULATORY INFORMATION:
This product is regulated by SARA Sections 311,312 solely because
it is regulated by OSHA Hazard Communication standard (29CFR
1910.1200). However none of the five Hazard Catagories (SARA 311,
312) are appropriate for this product.
SARA Section 313 toxic chemicals: NONE
All ingredients TSCA listed.
California PROP.65 Chemicals: none known
DISCLAIMER:
The information contained herein is based on data available as of
the date of preparation of this MSDS and which we believe to be
reliable. However, no warranty is expressed or implied regarding
the accuracy of the data. We shall not be responsible for the use
of this information, or of any product, method, or apparatus men-
tioned, and the user must make his own investigation to determine
the suitability of the information or products for his particular
purpose, for the protection of the environment, and the health and
safety of the users of this material.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Last Page
http://www.osisealants.com/MSDS/msds_data/quickbond_msds/07622.html (5 of 5) [11/23/2001 9:16:41 PM]
|