**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |Mixture of Sodium Salts of Non-hazardo| ca 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Low hazard for usual industrial handling. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Low hazard for usual industrial handling. The toxicological
properties of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Do NOT induce
vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls
of milk or water. Wash mouth out with water. Get medical aid if
irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Non-combustible, substance itself does not burn but may decompose
upon heating to produce irritating, corrosive and/or toxic fumes.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. No special precautions indicated.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-00-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: practically odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: > 100 deg C
Freezing/Melting Point: > 0 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: >1.0
Molecular Formula: Solution
Molecular Weight: 0
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 0-00-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Mixture of Sodium Salts of Non-hazardous Anions -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
No information available.
IMO
No information available.
RID/ADR
No information available.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 0-00-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-00-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-1 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/17/2000 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2,4-Dichlorophenyl isocyanate, 99%
| 2612-57-9 |
|
Mixed Indicator
| 518-67-2 |
|
Vanadium Molybdate Solution
| 7697-37-2 |
|
Lead nitrate solution, 0.01M
| 7732-18-5 |
|
Potassium Hydroxide 0.2N Solution in Methanol
| 67-56-1 |
|
Screened Methyl Red Solution
| 64-17-5 |
|
Sodium Hydroxide, 0.01N Solution
| 1310-73-2 |
|
Sodium Thiosulfate, 0.01N Solution
| 7732-18-5 |
|
Potassium Dichromate 0.0788N Solution
| 7732-18-5 |
|
Manganese(II) fluoride, 99%
| 7782-64-1 |
|
Cyclohexane, Pesticide Residue Analysis Grade
| 110-82-7 |
|
4-Benzyloxy-3-Methoxybenzaldehyde, 98%
| 2426-87-1 |
|
Diethylisopropylphosphonate.
| 1538-69-8 |
|
70% v/v Ethanol
| 64-17-5 |
|
Antibiotic A23187
| 52665-69-7 |
|
Mitomycin C
| 50-07-7 |
|
N-(tert-Butyldimethylsilyl)-N-methyl-trifluoroacetamide, 98%
| 77377-52-7 |
|
3-Diethylaminophenol, granulated, 99%
| 91-68-9 |
|
1-(P-Toluenesulfonyl)-Imidazole, 99%
| 2232-08-8 |
|
Ethyl-Triphenylphosphoniumchloride, 98%
| 896-33-3 |
|
Buffer Solution pH 5
| 144-33-2 |
|
Lithium Hexafluoroarsenate (V), 98%
| 29935-35-1 |
|
ICP Standard
| 7429-90-5 |
|
Potassium Hydrogen Phthalate, 400ppm Standard
| 877-24-7 |
|
Sodium persulfate 0.05% in 0.1% nitric acid
| 7697-37-2 |
|
Anion Standards
| 0-00-1 |
|
Sodium Dodecyl Sulfate Solutions, 0.004M to 0.1M
| 151-21-3 |
|
Sodium Tetraphenylboron, 0.01M Solution.
| 143-66-8 |
|
1-Iodopyridine, 99%
| 1120-90-7 |
|
n-Butyl sulfide, 99%
| 544-40-1 |
|
Isonipecotic acid hydrochloride, 97%
| 5984-56-5 |
|
5-Methyl-1H-Benzimidazole, 98%
| 614-97-1 |
|
N-Epsilon-carbobenzyloxy-l-lysine, 98%
| 1155-62-0 |
|
p-Nitrophenethylamine hydrochloride, 93% (TLC)
| 29968-78-3 |
|
3-(Trifluoromethyl)anisole
| 454-90-0 |
|
2,2,4-Trimethylpentane, pesticide residue analysis grade
| 540-84-1 |
|
Malonyl dichloride, 97%
| 1663-67-8 |
|
Hexaphenylbenzene, 98%
| 992-04-1 |
|
(4S,5S)-(-)-2-Methyl-5-Phenyl-2-Oxa-Zoline-4-Methanol
| 53732-41-5 |
|
Cellulose Propionate, Low Molecular Weight
| 9004-48-2 |
|
1,2,3,4-Cyclobutanetetracarboxylicdianhydride, 97%
| 4415-87-6 |
|
Benzene (Thiophene Free)
| 71-43-2 |
|
1-Methyl-DL-Tryptophan
| 26988-72-7 |
|
(-)-N-Methylephedrine, 99%
| 552-79-4 |
|
Poly(Alpha-Methylstyrene), M.W. 15000
| 25014-31-7 |
|
(-)-Glutathione, Hydrate, Oxidized (GSSG), 95%
| 121-24-4 |
|
Acetaldehyde-d4, 99+ atom % D
| 1632-89-9 |
|
2,6-Dichloro-3-Nitrobenzenesulfonyl Chloride
| 0-00-1 |
|
7-(4'-[2-Nitroimidazole-1-yl]butyl) Theophylline
| 0-00-1 |
|
D(+)-glucurono-3,6-lactone, 99+%
| 32449-92-6 |
|
|