Search   
MSDS 
:
 2,6-Dichloro-3-Nitrobenzenesulfonyl Chloride
CAS 
:
 0-00-1
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |2,6-Dichloro-3-Nitrobenzenesulfonyl Ch| ca 100 | unlisted |
| |loride | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T C
Risk Phrases: 23/24/25 34 42 43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed. Causes
burns. May cause sensitization by inhalation. May cause sensitization
by skin contact.Corrosive.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. The toxicological properties of this substance have not been
fully investigated. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Aspiration may lead to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Non-combustible, substance itself does not burn but may decompose
upon heating to produce corrosive and/or toxic fumes.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid runoff into storm sewers and ditches which lead to
waterways. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Discard
contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-00-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: off-white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, hydrogen sulfide, sulfur
oxides (SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-00-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,6-Dichloro-3-Nitrobenzenesulfonyl Chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Corrosive solid, n.o.s. (2,6-dichloro 3-nitrobenze
ne- sulfonyl chloride)
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S. (2,6-dichloro- 3-nitrobenz
ene- sulfonyl chloride)
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: Corrosive solid, n.o.s. (2,6-dichloro- 3-nitrobenz
ene- sulfonyl chloride)
Hazard Class: 8
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T C
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 34 Causes burns.
R 42 May cause sensitization by inhalation.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 8 Keep container dry.
S 23 Do not inhale gas/fumes/vapour/spray.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 0-00-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-00-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/05/2000 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4-Dichlorophenyl isocyanate, 99% 2612-57-9
Mixed Indicator 518-67-2
Vanadium Molybdate Solution 7697-37-2
Lead nitrate solution, 0.01M 7732-18-5
Potassium Hydroxide 0.2N Solution in Methanol 67-56-1
Screened Methyl Red Solution 64-17-5
Sodium Hydroxide, 0.01N Solution 1310-73-2
Sodium Thiosulfate, 0.01N Solution 7732-18-5
Potassium Dichromate 0.0788N Solution 7732-18-5
Manganese(II) fluoride, 99% 7782-64-1
Cyclohexane, Pesticide Residue Analysis Grade 110-82-7
4-Benzyloxy-3-Methoxybenzaldehyde, 98% 2426-87-1
Diethylisopropylphosphonate. 1538-69-8
70% v/v Ethanol 64-17-5
Antibiotic A23187 52665-69-7
Mitomycin C 50-07-7
N-(tert-Butyldimethylsilyl)-N-methyl-trifluoroacetamide, 98% 77377-52-7
3-Diethylaminophenol, granulated, 99% 91-68-9
1-(P-Toluenesulfonyl)-Imidazole, 99% 2232-08-8
Ethyl-Triphenylphosphoniumchloride, 98% 896-33-3
Buffer Solution pH 5 144-33-2
Lithium Hexafluoroarsenate (V), 98% 29935-35-1
ICP Standard 7429-90-5
Potassium Hydrogen Phthalate, 400ppm Standard 877-24-7
Sodium persulfate 0.05% in 0.1% nitric acid 7697-37-2
Anion Standards 0-00-1
Sodium Dodecyl Sulfate Solutions, 0.004M to 0.1M 151-21-3
Sodium Tetraphenylboron, 0.01M Solution. 143-66-8
1-Iodopyridine, 99% 1120-90-7
n-Butyl sulfide, 99% 544-40-1
Isonipecotic acid hydrochloride, 97% 5984-56-5
5-Methyl-1H-Benzimidazole, 98% 614-97-1
N-Epsilon-carbobenzyloxy-l-lysine, 98% 1155-62-0
p-Nitrophenethylamine hydrochloride, 93% (TLC) 29968-78-3
3-(Trifluoromethyl)anisole 454-90-0
2,2,4-Trimethylpentane, pesticide residue analysis grade 540-84-1
Malonyl dichloride, 97% 1663-67-8
Hexaphenylbenzene, 98% 992-04-1
(4S,5S)-(-)-2-Methyl-5-Phenyl-2-Oxa-Zoline-4-Methanol 53732-41-5
Cellulose Propionate, Low Molecular Weight 9004-48-2
1,2,3,4-Cyclobutanetetracarboxylicdianhydride, 97% 4415-87-6
Benzene (Thiophene Free) 71-43-2
1-Methyl-DL-Tryptophan 26988-72-7
(-)-N-Methylephedrine, 99% 552-79-4
Poly(Alpha-Methylstyrene), M.W. 15000 25014-31-7
(-)-Glutathione, Hydrate, Oxidized (GSSG), 95% 121-24-4
Acetaldehyde-d4, 99+ atom % D 1632-89-9
2,6-Dichloro-3-Nitrobenzenesulfonyl Chloride 0-00-1
7-(4'-[2-Nitroimidazole-1-yl]butyl) Theophylline 0-00-1
D(+)-glucurono-3,6-lactone, 99+% 32449-92-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net