Search   
MSDS 
:
 Vanadium Molybdate Solution
CAS 
:
 7697-37-2
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7697-37-2 |Nitric acid | <14.0 | 231-714-2 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
|----------------|--------------------------------------|----------|-----------|
| 7803-55-6 |Ammonium vanadate | <1.0 | 232-261-3 |
|----------------|--------------------------------------|----------|-----------|
| 12054-85-2 |Ammonium Molybdate | <2.0 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. Exposure may lead to bronchitis, pharyngitis,
and dental erosion. May cause systemic effects.
Chronic:
Effects may be delayed. Continued exposure to the vapor & mist of
nitric acid may result in a chronic bronchitis, & more severe
exposure results in a chemical pneumonitis. The vapor & mists of
nitric acid may erode the teeth, particularly affecting the canines &
incisors.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Non-combustible, substance itself does not burn but may decompose
upon heating to produce corrosive and/or toxic fumes.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Absorb spill using an absorbent, non-combustible
material such as earth, sand, or vermiculite. Do not use combustible
materials such as sawdust. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Do
not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin,
or on clothing. Keep container tightly closed. Do not ingest or
inhale. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7697-37-2:
United Kingdom, WEL - TWA: 2 ppm TWA; 5.2 mg/m3 TWA
United Kingdom, WEL - STEL: 4 ppm STEL; 10 mg/m3 STEL
United States OSHA: 2 ppm TWA; 5 mg/m3 TWA
Belgium - TWA: 2 ppm VLE; 5.3 mg/m3 VLE
Belgium - STEL: 4 ppm VLE; 10 mg/m3 VLE
France - VME: 2 ppm VME; 5 mg/m3 VME
France - VLE: 4 ppm VLE; 10 mg/m3 VLE
Germany: 2 ppm TWA; 5.2 mg/m3 TWA
Japan: 2 ppm OEL; 5.2 mg/m3 OEL
Malaysia: 2 ppm TWA; 5.2 mg/m3 TWA
Netherlands: 0.5 ppm STEL; 1.3 mg/m3 STEL
Russia: 2 mg/m3 TWA
Spain: 2 ppm VLA-ED; 5.2 mg/m3 VLA-ED
Spain: 4 ppm VLA-EC; 10 mg/m3 VLA-EC
CAS# 7732-18-5:

CAS# 7803-55-6:

CAS# 12054-85-2:
United Kingdom, WEL - TWA: (listed as molybdenum soluble compound
5 mg/m3 TWA (as Mo)
United Kingdom, WEL - STEL: (listed as molybdenum soluble compoun
10 mg/m3 STEL (as Mo)
United States OSHA: 5 mg/m3 TWA (as Mo) (listed under Molybdenum
soluble compounds).
Belgium - TWA: (listed as molybdenum soluble compounds): 5 mg/m3
(as Mo)
France - VME: (listed as molybdenum soluble compounds): 5 mg/m3 V
(as Mo)
France - VLE: (listed as molybdenum soluble compounds): 10 mg/m3
(as Mo)
Germany: (listed as molybdenum soluble compounds): 5 mg/m3 VME (a
Mo)
Malaysia: (listed as molybdenum soluble compounds): 5 mg/m3 TWA (
Mo)
Netherlands: (listed as molybdenum soluble compounds): 5 mg/m3 MA
(as Mo)
Russia: (listed as molybdenum soluble compounds): 2 mg/m3 TWA (as
Spain: (listed as molybdenum soluble compounds): 5 mg/m3 VLA-ED (
Mo)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: acrid odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: > 100 deg C
Freezing/Melting Point: > 0 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: Solution
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7697-37-2: QU5775000 QU5900000
CAS# 7732-18-5: ZC0110000
CAS# 7803-55-6: YW0875000
CAS# 12054-85-2 unlisted.
LD50/LC50:
CAS# 7697-37-2: Inhalation, rat: LC50 = 260 mg/m3/30M; Inhalation,
rat: LC50 = 130 mg/m3/4H; Inhalation, rat: LC50 = 67 ppm(NO2)/4H.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
CAS# 7803-55-6: Inhalation, rat: LC50 = 7800 ug/m3/4H; Oral, mouse:
LD50 = 25 mg/kg; Oral, rat: LD50 = 58100 ug/kg; Skin, rat: LD50 =
2102 mg/kg.
CAS# 12054-85-2.
Carcinogenicity:
Nitric acid -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Ammonium vanadate -
Not listed by ACGIH, IARC, or NTP.
Ammonium Molybdate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Corrosive liquid, acidic, inorganic, n.o.s.(nitric
acid)
Hazard Class: 8
UN Number: 3264
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.(NITRIC
ACID)
Hazard Class: 8
UN Number: 3264
Packing Group: II
RID/ADR
Shipping Name: Corrosive liquid, acidic, inorganic, n.o.s.(nitric
acid)
Hazard Class: 8
UN Number: 3264
Packing group: II
USA RQ: CAS# 7697-37-2: 1000 lb final RQ; 454 kg final RQ
USA RQ: CAS# 7803-55-6: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7697-37-2: 1
CAS# 7732-18-5: No information available.
CAS# 7803-55-6: No information available.
CAS# 12054-85-2: 1
Canada
CAS# 7697-37-2 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 7803-55-6 is listed on Canada's DSL List.
CAS# 7697-37-2 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 7803-55-6 is listed on Canada's Ingredient Disclosure List.
CAS# 12054-85-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7697-37-2 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.
CAS# 7803-55-6 is listed on the TSCA inventory.
CAS# 12054-85-2 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 1/12/2000 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4-Dichlorophenyl isocyanate, 99% 2612-57-9
Mixed Indicator 518-67-2
Vanadium Molybdate Solution 7697-37-2
Lead nitrate solution, 0.01M 7732-18-5
Potassium Hydroxide 0.2N Solution in Methanol 67-56-1
Screened Methyl Red Solution 64-17-5
Sodium Hydroxide, 0.01N Solution 1310-73-2
Sodium Thiosulfate, 0.01N Solution 7732-18-5
Potassium Dichromate 0.0788N Solution 7732-18-5
Manganese(II) fluoride, 99% 7782-64-1
Cyclohexane, Pesticide Residue Analysis Grade 110-82-7
4-Benzyloxy-3-Methoxybenzaldehyde, 98% 2426-87-1
Diethylisopropylphosphonate. 1538-69-8
70% v/v Ethanol 64-17-5
Antibiotic A23187 52665-69-7
Mitomycin C 50-07-7
N-(tert-Butyldimethylsilyl)-N-methyl-trifluoroacetamide, 98% 77377-52-7
3-Diethylaminophenol, granulated, 99% 91-68-9
1-(P-Toluenesulfonyl)-Imidazole, 99% 2232-08-8
Ethyl-Triphenylphosphoniumchloride, 98% 896-33-3
Buffer Solution pH 5 144-33-2
Lithium Hexafluoroarsenate (V), 98% 29935-35-1
ICP Standard 7429-90-5
Potassium Hydrogen Phthalate, 400ppm Standard 877-24-7
Sodium persulfate 0.05% in 0.1% nitric acid 7697-37-2
Anion Standards 0-00-1
Sodium Dodecyl Sulfate Solutions, 0.004M to 0.1M 151-21-3
Sodium Tetraphenylboron, 0.01M Solution. 143-66-8
1-Iodopyridine, 99% 1120-90-7
n-Butyl sulfide, 99% 544-40-1
Isonipecotic acid hydrochloride, 97% 5984-56-5
5-Methyl-1H-Benzimidazole, 98% 614-97-1
N-Epsilon-carbobenzyloxy-l-lysine, 98% 1155-62-0
p-Nitrophenethylamine hydrochloride, 93% (TLC) 29968-78-3
3-(Trifluoromethyl)anisole 454-90-0
2,2,4-Trimethylpentane, pesticide residue analysis grade 540-84-1
Malonyl dichloride, 97% 1663-67-8
Hexaphenylbenzene, 98% 992-04-1
(4S,5S)-(-)-2-Methyl-5-Phenyl-2-Oxa-Zoline-4-Methanol 53732-41-5
Cellulose Propionate, Low Molecular Weight 9004-48-2
1,2,3,4-Cyclobutanetetracarboxylicdianhydride, 97% 4415-87-6
Benzene (Thiophene Free) 71-43-2
1-Methyl-DL-Tryptophan 26988-72-7
(-)-N-Methylephedrine, 99% 552-79-4
Poly(Alpha-Methylstyrene), M.W. 15000 25014-31-7
(-)-Glutathione, Hydrate, Oxidized (GSSG), 95% 121-24-4
Acetaldehyde-d4, 99+ atom % D 1632-89-9
2,6-Dichloro-3-Nitrobenzenesulfonyl Chloride 0-00-1
7-(4'-[2-Nitroimidazole-1-yl]butyl) Theophylline 0-00-1
D(+)-glucurono-3,6-lactone, 99+% 32449-92-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net