Search   
MSDS 
:
 3-Hydroxyphenylacetone
CAS 
:
 0-01-1
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |3-Hydroxyphenylacetone | ca. 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Runoff from fire control or dilution water
may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-01-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: yellow
Odor: characteristic odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-01-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Hydroxyphenylacetone -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 0-01-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-01-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-01-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/13/2001 Revision #2 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Cyclopentadienylthallium 34822-90-7
2-Undecanone, 99% (GC) 112-12-9
1-Butyl-3-Methylimidazolium Hexafluorophosphate 174501-64-5
1-Hexyl-3-Methylimidazolium Hexafluorophosphate 304680-35-1
1-Ethyl-3-Methylimidazoliuim Chloride 65039-09-0
1-Butyl-3-Methylimidazolium Chloride 79917-90-1
1-Hexyl-3-Methylimidazolium Chloride 171058-17-6
1-Butyl-2,3-dimethylimidazolium chloride 98892-75-2
1-Hexyl-2,3-Dimethylimidazolium Chloride 0-01-1
1-Ethyl-2,3-Dimethylimidazolium Chloride 0-01-1
1-Ethylpyridinium Chloride 0-01-1
1-Butylpyridinium Chloride 1124-64-7
1-Hexylpyridinium Chloride 0-01-1
Octadecyl succinic anhydride, 97% (titr.) 47458-32-2
1-Butylpyridinium Hexafluorophosphate 0-01-1
1-Hexylpyridinium Hexafluorophosphate 0-01-1
(Carbethoxyethylidene)triphenylphosphorane, ca. 94%, balance TPPO 5717-37-3
3-Hydroxyphenylacetone 0-01-1
2'-Deoxyguanosine Hemihydrate, 99+% 961-07-9
2-Chloro-4-Methyl Aniline 615-65-6
Ethylamine, anhydrous 75-04-7
2-Chloro-4-Methyl Aniline Hydrochloride 0-01-1
1-Cyanonaphthalene, 98% 86-53-3
Tri-n-butyltin cyanide, 97% 2179-92-2
Baccatine III, 95% 27548-93-2
1,3-Dibromopropane, 98% 109-64-8
Phenamil methanesulfonate 1161-94-0
Diethylethylphosphonate 78-38-6
(R)-(-)-2-Chloromandelic acid, 99% 52950-18-2
N-Epsilon-Benzoyl-L-Lysine, 98% 0-01-1
(R)-1,2-Decanediol 87827-60-9
Dimethyloctadecyl(3-(Trimethoxysilyl)Propyl)Ammonium Chloride, 60% in 67-56-1
Hemin, porcine, 99% 16009-13-5
Heptakis-6-Azido-6-Deoxy-beta-Cyclodextrin, 95% 0-01-1
Trimethylstannylmethyldiphenylsilan, 96% 149013-84-3
1-Hexanesulfonic acid sodium salt premixed concentration (low uv) 27668-52-6
Niobium (V) Fluoride, 98% 7783-68-8
Thermometer Fill 100-41-4
DCI Activator Solution 75-05-8
Amberlite XAD-4 Resin 7732-18-5
2-(2-Methoxyphenyl)-N-Methylbenzamine Hydrochloride Salt 0-01-1
3-(2-Methoxyphenyl)-Piperidine Maleic Acid Salt 0-01-1
4-(3-Fluoro-4-Cyanophenoxy)Piperidine Hydrochloride 0-01-1
4-(3-Methylphenoxy)Piperidine Hydrochloride Salt 63843-46-9
4-(2-Methylphenoxy) Piperidine Hydrochloride Salt 63843-42-5
4-(2-Chlorophenoxy) Piperidine Hydrochloride Salt 0-01-1
4-(4-Acetamidephenoxy) Piperidine Hydrochloride Salt 0-01-1
4-(3-Chloro-4-Cyanophenoxy) Piperidine Hydrochloride Salt 0-01-1
2-Oxo-3-(4-Piperidine)-5-(2,6-Difluorophenyl) Imidazole 0-01-1
4-(4-Methylsulfonylphenoxy) Piperidine Hydrochloride Salt 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net