Search   
MSDS 
:
 4-(3-Fluoro-4-Cyanophenoxy)Piperidine Hydrochloride
CAS 
:
 0-01-1
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |4-(3-Fluoro-4-Cyanophenoxy)Piperidine | ca. 100 | unlisted |
| |Hydrochloride | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. Toxic in contact with skin.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Toxic if swallowed.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Toxic if inhaled.
Can produce delayed pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Avoid generating dusty conditions. Provide
ventilation. Vacuum or sweep up material and place into a suitable,
dry disposal container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Do not get in eyes, on skin, or on
clothing. Keep container tightly closed. Do not ingest or inhale.
Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-01-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 273-275 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C12H13N2OFHCl
Molecular Weight: 256.71

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide,
hydrogen fluoride gas.
Hazardous Polymerization: Not available.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-01-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(3-Fluoro-4-Cyanophenoxy)Piperidine Hydrochloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 0-01-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-01-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-01-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/08/2001 Revision #3 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Cyclopentadienylthallium 34822-90-7
2-Undecanone, 99% (GC) 112-12-9
1-Butyl-3-Methylimidazolium Hexafluorophosphate 174501-64-5
1-Hexyl-3-Methylimidazolium Hexafluorophosphate 304680-35-1
1-Ethyl-3-Methylimidazoliuim Chloride 65039-09-0
1-Butyl-3-Methylimidazolium Chloride 79917-90-1
1-Hexyl-3-Methylimidazolium Chloride 171058-17-6
1-Butyl-2,3-dimethylimidazolium chloride 98892-75-2
1-Hexyl-2,3-Dimethylimidazolium Chloride 0-01-1
1-Ethyl-2,3-Dimethylimidazolium Chloride 0-01-1
1-Ethylpyridinium Chloride 0-01-1
1-Butylpyridinium Chloride 1124-64-7
1-Hexylpyridinium Chloride 0-01-1
Octadecyl succinic anhydride, 97% (titr.) 47458-32-2
1-Butylpyridinium Hexafluorophosphate 0-01-1
1-Hexylpyridinium Hexafluorophosphate 0-01-1
(Carbethoxyethylidene)triphenylphosphorane, ca. 94%, balance TPPO 5717-37-3
3-Hydroxyphenylacetone 0-01-1
2'-Deoxyguanosine Hemihydrate, 99+% 961-07-9
2-Chloro-4-Methyl Aniline 615-65-6
Ethylamine, anhydrous 75-04-7
2-Chloro-4-Methyl Aniline Hydrochloride 0-01-1
1-Cyanonaphthalene, 98% 86-53-3
Tri-n-butyltin cyanide, 97% 2179-92-2
Baccatine III, 95% 27548-93-2
1,3-Dibromopropane, 98% 109-64-8
Phenamil methanesulfonate 1161-94-0
Diethylethylphosphonate 78-38-6
(R)-(-)-2-Chloromandelic acid, 99% 52950-18-2
N-Epsilon-Benzoyl-L-Lysine, 98% 0-01-1
(R)-1,2-Decanediol 87827-60-9
Dimethyloctadecyl(3-(Trimethoxysilyl)Propyl)Ammonium Chloride, 60% in 67-56-1
Hemin, porcine, 99% 16009-13-5
Heptakis-6-Azido-6-Deoxy-beta-Cyclodextrin, 95% 0-01-1
Trimethylstannylmethyldiphenylsilan, 96% 149013-84-3
1-Hexanesulfonic acid sodium salt premixed concentration (low uv) 27668-52-6
Niobium (V) Fluoride, 98% 7783-68-8
Thermometer Fill 100-41-4
DCI Activator Solution 75-05-8
Amberlite XAD-4 Resin 7732-18-5
2-(2-Methoxyphenyl)-N-Methylbenzamine Hydrochloride Salt 0-01-1
3-(2-Methoxyphenyl)-Piperidine Maleic Acid Salt 0-01-1
4-(3-Fluoro-4-Cyanophenoxy)Piperidine Hydrochloride 0-01-1
4-(3-Methylphenoxy)Piperidine Hydrochloride Salt 63843-46-9
4-(2-Methylphenoxy) Piperidine Hydrochloride Salt 63843-42-5
4-(2-Chlorophenoxy) Piperidine Hydrochloride Salt 0-01-1
4-(4-Acetamidephenoxy) Piperidine Hydrochloride Salt 0-01-1
4-(3-Chloro-4-Cyanophenoxy) Piperidine Hydrochloride Salt 0-01-1
2-Oxo-3-(4-Piperidine)-5-(2,6-Difluorophenyl) Imidazole 0-01-1
4-(4-Methylsulfonylphenoxy) Piperidine Hydrochloride Salt 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net