Search   
MSDS 
:
 PIPES, Sesquisodium salt
CAS 
:
 100037-69-2
SYNONYMS 
:
 Piperazine-1,4-Bis(2-ethanesulfonic acid) sesquisodium salt.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 100037-69-2 |PIPES, sesquisodium salt | ca.100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed.The toxicological properties of this material
have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. No sensitizing effects known.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 100037-69-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 572 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: Not applicable.
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon
dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 100037-69-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
PIPES, sesquisodium salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Daphnia: Daphnia: >1000 mg/L; 24 Hrs; EC50Fish: Zebrafish: >1000
mg/L; 96 Hrs; LC100

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLIDS, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLIDS, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLIDS, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 100037-69-2: No information available.
Canada
CAS# 100037-69-2 is listed on Canada's DSL List.
CAS# 100037-69-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 100037-69-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/15/1999 Revision #4 Date: 6/03/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Hydroxyflavone, 99% (tlc) 577-85-5
Styrene Oxide, D8, 97+ Atom% D 0-01-1
4-Decyloxybenzaldehyde, 97% 24083-16-7
Thymol Blue 76-61-9
Palmitoyl chloride, 98% (titr.) 112-67-4
4-Nitrohippuric acid, 98% 2645-07-0
2-Methyl-5-propionyl-furan 95% 10599-69-6
2,3,5-Triphenyltetrazolium chloride 298-96-4
Sulfuric acid, fuming, approx. 20% free SO3 7446-11-9
4-Iodo-m-xylene, 95% (GC) 4214-28-2
Tris(hydroxymethyl)aminomethane hydrochloride 1185-53-1
Brilliant Blue G-250 6104-58-1
Brilliant Blue R-250 6104-59-2
Ethidium bromide 1239-45-8
Pyronin Y 92-32-0
Nitro Blue tetrazolium 298-83-9
Oil red o (cert) 1320-06-5
Dithiothreitol 3483-12-3
Dithioerythritol 6892-68-8
Guanidine Thiocyanate 593-84-0
Isopropoxypropionitrile, 99+% 110-47-4
D-Biotin 58-85-5
Sarkosyl 137-16-6
MES (buffering agent) 4432-31-9
Bis-Tris 6976-37-0
TES 7365-44-8
HEPES 7365-45-9
Tricine 5704-04-1
CAPS 1135-40-6
P-tert.-Octylcalix[5]arene
L-Isoleucine 73-32-5
L-Leucine 61-90-5
L-Ornithine Hydrochloride 3184-13-2
L-Proline 147-85-3
L-Serine 56-45-1
L-Threonine 72-19-5
4,4,10-Trimethyl-Tricyclo(7,3,1,0(1-6))- 6,10-Tridecadiene-2,8-Dione, 0-01-1
2'-Deoxyguanosine-5'-Triphosphate Trisodium Salt Dihydrate 2564-35-4
2-(Trifluoromethyl)Phenethyl Alcohol, 97% 0-01-1
Benzamidine Hydrochloride Hydrate 1670-14-0
PIPES, Sesquisodium salt 100037-69-2
Ches 103-47-9
Dimethyl 1,4-Cyclohexanedicarboxylate, 90- 95%, Mixture of Cis- and 94-60-0
1,2,3-tris(2-cyanoethoxy)propane 2465-93-2
alpha-Chloro-m-xylene, 96% 620-19-9
Bovine Serum Albumin (Fraction V) 9048-46-8
Glycylglycine 556-50-3
4-Amino-2-chloro-alpha-(4-chlorophenyl)-5- methylbenzeneacetonitrile, 61437-85-2
Ir-810, 96% (hplc) 91160-56-4
(+)-cis-2(s),3(s)-2,3-dihydroxy-2,3- dihydrobromobenzene, 98+% 130792-45-

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net