Search   
MSDS 
:
 (Carbethoxymethylene)-Triphenyl-Phosphorane, 98+% (HPLC)
CAS 
:
 1099-45-2
SYNONYMS 
:
 Ethyl (Triphenylphosphoranylidene)Acetate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1099-45-2 |(Carbethoxymethylene)-Triphenyl-Phosph| 98+% | 214-151-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Air sensitive.Moisture sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. Use agent most
appropriate to extinguish fire. Do NOT get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Provide ventilation. Place under an
inert atmosphere. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Handle under an inert atmosphere. Store protected from
air. Do not allow contact with water. Keep from contact with moist
air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.) Do not expose to air. Store
protected from moisture. Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1099-45-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white - off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 123 - 125 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C22H21O2P
Molecular Weight: 348.38

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, exposure to air, excess
heat, exposure to moist air or water, oxidizers.
Incompatibilities with Other Materials:
Air, moisture, oxidizing agents.
Hazardous Decomposition Products:
Phosphine, carbon monoxide, oxides of phosphorus, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1099-45-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(Carbethoxymethylene)-Triphenyl-Phosphorane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1099-45-2: No information available.
Canada
CAS# 1099-45-2 is listed on Canada's NDSL List.
CAS# 1099-45-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1099-45-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
alpha-Chloro-p-xylene, 99+% 104-82-5
Tetrabromo-O-Benzoquinone, 99% 2435-54-3
1,2-Diacetylbenzene, 99% 704-00-7
1-Chloromethyl-4-Fluoro-1,4-Diazoniabicycl o??2.2.2??Octane 0-00-1
(Carbethoxymethylene)-Triphenyl-Phosphorane, 98+% (HPLC) 1099-45-2
6-Methoxyquinoline, 98% 5263-87-6
Acrylonitrile, 99+% (inhibited with 35-45 ppm MEHQ) 107-13-1
Chloroacetic anhydride, 97% (titr.) 541-88-8
(R)-(-)-2-Aminobutane, 98% 13250-12-9
Cis-2-Hydroxymethyl-4-Cyclohexenyl-1-Amine, Hydrochloride, 98+% 98769-56-3
Kjeldahl tablets with selenium (Wieninger) 7757-82-6
Ammonium tungstate, 99.999% 11120-25-5
Alpha-(2,4-Dichlorophenyl)-1H-Imidazole-1-Ethanol, 98% (Titr.) 24155-42-8
4,4'-Difluorodiphenylmethane,99% 457-68-1
N,N'-o-Phenylenedimaleimide, 99% 13118-04-2
4-Acetylamino-2,2,6,6-tetramethylpiperidin -1-oxyl, 99% 14691-89-5
Tetrabutylammonium periodate 65201-77-6
Aniline hydrogen phthalate, 99% 50930-79-5
2-Methoxypropene, 92% stabilized with 0.5% Potassium Carbonate 116-11-0
3,4-Dimethoxycinnamic Acid, 99% Predominantly Trans Isomer 2316-26-9
Acenaphtho[1,2-b]quinoxaline
o-Hydroxyphenethyl alcohol, 99% 7768-28-7
P-Tolualdehyde, 99+% (GC) 104-87-0
2-Ethylpiperidine, 95+% (GC) 1484-80-6
4',5,7- Trihydroxyflavanone, 97+%(tlc) 480-41-1
n-Acetyl-s-phenyl-l-cysteine 4775-80-8
13-cis-Retinoic acid, 99% (titr.) 4759-48-2
Inulin, from Dahlia tubers 9005-80-5
4-Chlorophenacyl Thiocyanate 19339-59-4
1-(4-Nitrophenyl)-2-Pyrrolidinone, 99+%(GC) 13691-26-4
2-Deoxy-D-Ribose, 99% 533-67-5
3-Fluoropyridine, 99% 372-47-4
2,3,5-Collidine, 99+% 695-98-7
Tetramethylammonium Hexafluorophosphate 558-32-7
Aminoacetaldehyde Dimethyl Acetal, 99% 22483-09-6
Geraniol, 99% (GC) 106-23-0
Malonamamidine hydrochloride, 99% 34570-17-7
4-Nitrophenethyl bromide, 98% 5339-26-4
d-Tyrosine, 98% 556-02-5
(3,3-Diisopropoxypropyl)triphenylphosphonium bromide, 90% 72931-54-5
Methyl 4-cyanobenzoate, 99+% (gc) 1129-35-7
1-Methyl-1-cyclopentene, 96% 693-89-0
Rosolic Acid 603-45-2
N,N'-Diphenylformamidine, 98% 622-15-1
DL-Homoserine, 99% 1927-25-9
2-Nitroso-1-Naphthol 95% 132-53-6
Indene, Tech., 90% 95-13-6
n-Acetyl-l-tryptophanamide 2382-79-8
Cyclohexanecarboxylic acid, 98+% 98-89-5
(2-Fluorophenyl)acetone, 99% 2836-82-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net