Search   
MSDS 
:
 1,4-Dibromobutane, 97%
CAS 
:
 110-52-1
SYNONYMS 
:
 Tetramethylene Bromide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-52-1 |1,4-Dibromobutane | 97% | 203-775-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.Lachrymator (substance which increases
the flow of tears).

Potential Health Effects
Eye:
Produces irritation, characterized by a burning sensation, redness,
tearing, inflammation, and possible corneal injury. Lachrymator
(substance which increases the flow of tears). May cause chemical
conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation. Can produce delayed
pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid. Do
NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Runoff from fire control or dilution water
may cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Use with adequate ventilation. Wash clothing before
reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 110-52-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear a chemical apron.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: 1.22325 mm Hg
Viscosity: Not available.
Boiling Point: 197 deg C @ 760.00mmHg
Freezing/Melting Point: -20 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Immiscible.
Specific Gravity/Density: 1.8080g/cm3
Molecular Formula: C4H8Br2
Molecular Weight: 215.92

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-52-1: EJ7565000
LD50/LC50:
Not available.
Carcinogenicity:
1,4-Dibromobutane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID,ORGANIC,N.O.S. (1,4-DIBROMOBUTANE)
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID,ORGANIC,N.O.S. (1,4-DIBROMOBUTANE)
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID,ORGANIC,N.O.S. (1,4-DIBROMOBUTANE)
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 110-52-1: No information available.
Canada
CAS# 110-52-1 is listed on Canada's NDSL List.
CAS# 110-52-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-52-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/27/1999 Revision #4 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Allyldimethylchlorosilane, 97% 4028-23-3
Isopropylmethyldichlorosilane, 97% 18236-89-0
Potassium dichromate, 99.5% 7778-50-9
Allyl ether, 99% 557-40-4
N-Decanoic Anhydride, 98% 2082-76-0
2,2-Dimethyl-1,3-Dioxolane, 99% 2916-31-6
Methylene Blue (Pract), 75% (Titr.) 61-73-4
Diethyl 3,3-Dimethylcyclopent-1-Enylphosphonate, 98% 0-01-1
Ammonium molybdate tetrahydrate, certified ACS, crystalline 12027-67-7
Tris(6,6,7,7,8,8,8-Heptafluoro-2,2- 18323-96-1
(3,3-Dimethylcyclopent-1-enylmethyl)trimethylsilane, 97% 0-01-1
2,4-Dimethoxy-1-Nitrobenzene, 98% 4920-84-7
2-Methylpropyl 3,5-Diamino-4-Chlorobenzoate 32961-44-7
Phthalic Acid Monopotassium Salt, 99+% (Titr.) 877-24-7
Ammonium nitrate 6484-52-2
Diethyl 3,3-Dimethylcyclohex-1-Enylphosphonate, 98% 109467-69-8
4-Amino-N,N-Diethyl-m-Toluidine Hydrochloride, 98% 148-71-0
(3,3-Dimethylcyclohex-1-enylmethyl)trimethylsilane, 98% 0-01-1
2-Phenylmercaptomethylbenzoic Acid, 98% 1699-03-2
Rhein, Tech. 90% 478-43-3
Potassium hydroxide, pellets, p.a. 1310-58-3
Salicylideneaniline, 98% 779-84-0
2,6-Diaminopurine 1904-98-9
N-Alpha-Carbobenzyloxy-L-Arginine, 98% 1234-35-1
Methylphenylvinylsilane 17878-39-6
Potassium Iodate, P.A. 7758-05-6
Potassium Metabisulfite 16731-55-8
Potassium Nitrite, Reagent ACS (Crystals), 96+% (Titr.) 7758-09-0
Dimethylmethoxy-n-octylsilane 93804-29-6
Potassium oxalate monohydrate, reagent ACS 583-52-8
Dodecamethylpentasiloxane, 97% 141-63-9
Potassium periodate (meta), 99+% (titr.) 7790-21-8
(4-Nitrophenyl)Octyl Ether, 99% 49562-76-7
1-Methoxy-1-methylamino-2-nitroethylene, 98% 110763-36-5
3-Hydroxy-1,2,3-Benzotriazin-4(3H)-One, 98% 28230-32-2
Strontium peroxide, 90-95% 1314-18-7
1,1,3,3,5,5-Hexamethyltrisiloxane, 97% 1189-93-1
Phosphorus pentachloride 10026-13-8
Potassium Permanganate, P.A. 7722-64-7
Astaxanthin 471-53-4
Thapsigargin 67526-95-8
Wortmannin 19545-26-7
AMT.hydrochloride 1121-91-1
Potassium Persulfate, Reagent ACS (Crystals), 99+% (Titr.) 7727-21-1
3-Bromo-7-nitroindazole 74209-34-0
Potassium phosphate tribasic monohydrate 7778-53-2
Methyl 4-aminobenzoate, 98% 619-45-4
Carboxy-PTIO 148819-94-7
1,4-Dibromobutane, 97% 110-52-1
tert-Butylhydroquinone, 97% 1948-33-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net