**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2082-76-0 |N-Decanoic Anhydride | 98% | 218-213-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause blindness. Contact with the eyes may
cause corneal damage. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. The toxicological properties of this substance have not been
fully investigated. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Aspiration may lead to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas. Runoff
from fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide. Do NOT get water inside containers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale. Do not allow contact with water. Use only in a chemical fume
hood. Discard contaminated shoes. Keep from contact with moist air
and steam.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store in a tightly closed container. Corrosives area. Store protected
from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2082-76-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 130 deg C @ 0.2 mmHg
Freezing/Melting Point: 24 deg C
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.886
Molecular Formula: C20H38O3
Molecular Weight: 326.2642
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, moisture, excess heat, exposure to
moist air or water.
Incompatibilities with Other Materials:
Moisture, bases, oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 2082-76-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N-Decanoic Anhydride -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Ecotoxicity:
Fish: Pseudomonas putida:
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2082-76-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2082-76-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2082-76-0 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 3/30/1999 Revision #4 Date: 10/05/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Allyldimethylchlorosilane, 97%
| 4028-23-3 |
|
Isopropylmethyldichlorosilane, 97%
| 18236-89-0 |
|
Potassium dichromate, 99.5%
| 7778-50-9 |
|
Allyl ether, 99%
| 557-40-4 |
|
N-Decanoic Anhydride, 98%
| 2082-76-0 |
|
2,2-Dimethyl-1,3-Dioxolane, 99%
| 2916-31-6 |
|
Methylene Blue (Pract), 75% (Titr.)
| 61-73-4 |
|
Diethyl 3,3-Dimethylcyclopent-1-Enylphosphonate, 98%
| 0-01-1 |
|
Ammonium molybdate tetrahydrate, certified ACS, crystalline
| 12027-67-7 |
|
Tris(6,6,7,7,8,8,8-Heptafluoro-2,2-
| 18323-96-1 |
|
(3,3-Dimethylcyclopent-1-enylmethyl)trimethylsilane, 97%
| 0-01-1 |
|
2,4-Dimethoxy-1-Nitrobenzene, 98%
| 4920-84-7 |
|
2-Methylpropyl 3,5-Diamino-4-Chlorobenzoate
| 32961-44-7 |
|
Phthalic Acid Monopotassium Salt, 99+% (Titr.)
| 877-24-7 |
|
Ammonium nitrate
| 6484-52-2 |
|
Diethyl 3,3-Dimethylcyclohex-1-Enylphosphonate, 98%
| 109467-69-8 |
|
4-Amino-N,N-Diethyl-m-Toluidine Hydrochloride, 98%
| 148-71-0 |
|
(3,3-Dimethylcyclohex-1-enylmethyl)trimethylsilane, 98%
| 0-01-1 |
|
2-Phenylmercaptomethylbenzoic Acid, 98%
| 1699-03-2 |
|
Rhein, Tech. 90%
| 478-43-3 |
|
Potassium hydroxide, pellets, p.a.
| 1310-58-3 |
|
Salicylideneaniline, 98%
| 779-84-0 |
|
2,6-Diaminopurine
| 1904-98-9 |
|
N-Alpha-Carbobenzyloxy-L-Arginine, 98%
| 1234-35-1 |
|
Methylphenylvinylsilane
| 17878-39-6 |
|
Potassium Iodate, P.A.
| 7758-05-6 |
|
Potassium Metabisulfite
| 16731-55-8 |
|
Potassium Nitrite, Reagent ACS (Crystals), 96+% (Titr.)
| 7758-09-0 |
|
Dimethylmethoxy-n-octylsilane
| 93804-29-6 |
|
Potassium oxalate monohydrate, reagent ACS
| 583-52-8 |
|
Dodecamethylpentasiloxane, 97%
| 141-63-9 |
|
Potassium periodate (meta), 99+% (titr.)
| 7790-21-8 |
|
(4-Nitrophenyl)Octyl Ether, 99%
| 49562-76-7 |
|
1-Methoxy-1-methylamino-2-nitroethylene, 98%
| 110763-36-5 |
|
3-Hydroxy-1,2,3-Benzotriazin-4(3H)-One, 98%
| 28230-32-2 |
|
Strontium peroxide, 90-95%
| 1314-18-7 |
|
1,1,3,3,5,5-Hexamethyltrisiloxane, 97%
| 1189-93-1 |
|
Phosphorus pentachloride
| 10026-13-8 |
|
Potassium Permanganate, P.A.
| 7722-64-7 |
|
Astaxanthin
| 471-53-4 |
|
Thapsigargin
| 67526-95-8 |
|
Wortmannin
| 19545-26-7 |
|
AMT.hydrochloride
| 1121-91-1 |
|
Potassium Persulfate, Reagent ACS (Crystals), 99+% (Titr.)
| 7727-21-1 |
|
3-Bromo-7-nitroindazole
| 74209-34-0 |
|
Potassium phosphate tribasic monohydrate
| 7778-53-2 |
|
Methyl 4-aminobenzoate, 98%
| 619-45-4 |
|
Carboxy-PTIO
| 148819-94-7 |
|
1,4-Dibromobutane, 97%
| 110-52-1 |
|
tert-Butylhydroquinone, 97%
| 1948-33-0 |
|
|